SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Palacio Jorge) "

Sökning: WFRF:(Palacio Jorge)

  • Resultat 1-6 av 6
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Anderson, P., et al. (författare)
  • Improving the delivery of brief interventions for heavy drinking in primary health care: outcome results of the Optimizing Delivery of Health Care Intervention (ODHIN) five-country cluster randomized factorial trial
  • 2016
  • Ingår i: Addiction. - : WILEY-BLACKWELL. - 1360-0443 .- 0965-2140. ; 111:11, s. 1935-1945
  • Tidskriftsartikel (refereegranskat)abstract
    • Aim: To test if training and support, financial reimbursement and option of referring screen-positive patients to an internet-based method of giving advice (eBI) can increase primary health-care providers' delivery of Alcohol Use Disorders Identification Test (AUDIT)-C-based screening and advice to heavy drinkers. Design: Cluster randomized factorial trial with 12-week implementation and measurement period. Setting: Primary health-care units (PHCU) in different locations throughout Catalonia, England, the Netherlands, Poland and Sweden. Participants: A total of 120 PHCU, 24 in each of Catalonia, England, the Netherlands, Poland and Sweden. Interventions: PHCUs were randomized to one of eight groups: care as usual, training and support (TS), financial reimbursement (FR) and eBI; paired combinations of TS, FR and eBI, and all of FR, TS and eBI. Measurements: The primary outcome measure was the proportion of eligible adult (age 18+ years) patients screened during a 12-week implementation period. Secondary outcome measures were proportion of screen-positive patients advised; and proportion of consulting adult patients given an intervention (screening and advice to screen-positives) during the same 12-week implementation period. Findings: During a 4-week baseline measurement period, the proportion of consulting adult patients who were screened for their alcohol consumption was 0.059 per PHCU (95% CI 0.034 to 0.084). Based on the factorial design, the ratio of the logged proportion screened during the 12-week implementation period was 1.48 (95% CI = 1.13–1.95) in PHCU that received TS versus PHCU that did not receive TS; for FR, the ratio was 2.00 (95% CI = 1.56–2.56). The option of referral to eBI did not lead to a higher proportion of patients screened. The ratio for TS plus FR was 2.34 (95% CI = 1.77–3.10), and the ratio for TS plus FR plus eBI was1.68 (95% CI = 1.11–2.53). Conclusions: Providing primary health-care units with training, support and financial reimbursement for delivering Alcohol Use Disorders Identification Test-C-based screening and advice to heavy drinkers increases screening for alcohol consumption. Providing primary health-care units with the option of referring screen-positive patients to an internet-based method of giving advice does not appear to increase screening for alcohol consumption. © 2016 Society for the Study of Addiction
  •  
2.
  • Bosson, J. K., et al. (författare)
  • Psychometric Properties and Correlates of Precarious Manhood Beliefs in 62 Nations
  • 2021
  • Ingår i: Journal of Cross-Cultural Psychology. - : SAGE Publications. - 0022-0221 .- 1552-5422. ; 52:3
  • Tidskriftsartikel (refereegranskat)abstract
    • Precarious manhood beliefs portray manhood, relative to womanhood, as a social status that is hard to earn, easy to lose, and proven via public action. Here, we present cross-cultural data on a brief measure of precarious manhood beliefs (the Precarious Manhood Beliefs scale [PMB]) that covaries meaningfully with other cross-culturally validated gender ideologies and with country-level indices of gender equality and human development. Using data from university samples in 62 countries across 13 world regions (N = 33,417), we demonstrate: (1) the psychometric isomorphism of the PMB (i.e., its comparability in meaning and statistical properties across the individual and country levels); (2) the PMB's distinctness from, and associations with, ambivalent sexism and ambivalence toward men; and (3) associations of the PMB with nation-level gender equality and human development. Findings are discussed in terms of their statistical and theoretical implications for understanding widely-held beliefs about the precariousness of the male gender role.
  •  
3.
  • Keurhorst, M., et al. (författare)
  • Impact of primary healthcare providers' initial role security and therapeutic commitment on implementing brief interventions in managing risky alcohol consumption: a cluster randomised factorial trial
  • 2016
  • Ingår i: Implementation Science. - : BIOMED CENTRAL LTD. - 1748-5908. ; 11
  • Tidskriftsartikel (refereegranskat)abstract
    • Background: Brief interventions in primary healthcare are cost-effective in reducing drinking problems but poorly implemented in routine practice. Although evidence about implementing brief interventions is growing, knowledge is limited with regard to impact of initial role security and therapeutic commitment on brief intervention implementation. Methods: In a cluster randomised factorial trial, 120 primary healthcare units (PHCUs) were randomised to eight groups: care as usual, training and support, financial reimbursement, and the opportunity to refer patients to an internet-based brief intervention (e-BI); paired combinations of these three strategies, and all three strategies combined. To explore the impact of initial role security and therapeutic commitment on implementing brief interventions, we performed multilevel linear regression analyses adapted to the factorial design. Results: Data from 746 providers from 120 PHCUs were included in the analyses. Baseline role security and therapeutic commitment were found not to influence implementation of brief interventions. Furthermore, there were no significant interactions between these characteristics and allocated implementation groups. Conclusions: The extent to which providers changed their brief intervention delivery following experience of different implementation strategies was not determined by their initial attitudes towards alcohol problems. In future research, more attention is needed to unravel the causal relation between practitioners' attitudes, their actual behaviour and care improvement strategies to enhance implementation science.
  •  
4.
  • Backes, Claudia, et al. (författare)
  • Production and processing of graphene and related materials
  • 2020
  • Ingår i: 2D Materials. - : IOP PUBLISHING LTD. - 2053-1583. ; 7:2
  • Tidskriftsartikel (refereegranskat)abstract
    • We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
  •  
5.
  • Bendtsen, Preben, et al. (författare)
  • Implementing referral to an electronic alcohol brief advice website in primary healthcare: results from the ODHIN implementation trial
  • 2016
  • Ingår i: BMJ Open. - : BMJ PUBLISHING GROUP. - 2044-6055 .- 2044-6055. ; 6:6
  • Tidskriftsartikel (refereegranskat)abstract
    • Objectives The objective of the present study was to explore whether the possibility of offering facilitated access to an alcohol electronic brief intervention (eBI) instead of delivering brief face-to-face advice increased the proportion of consulting adults who were screened and given brief advice. Design The study was a 12-week implementation study. Sixty primary healthcare units (PHCUs) in 5 jurisdictions (Catalonia, England, the Netherlands, Poland and Sweden) were asked to screen adults who attended the PHCU for risky drinking. Setting A total of 120 primary healthcare centres from 5 jurisdictions in Europe. Participants 746 individual providers (general practitioners, nurses or other professionals) participated in the study. Primary outcome Change in the proportion of patients screened and referred to eBI comparing a baseline 4-week preimplementation period with a 12-week implementation period. Results The possibility of referring patients to the eBI was not found to be associated with any increase in the proportion of patients screened. However, it was associated with an increase in the proportion of screen-positive patients receiving brief advice from 70% to 80% for the screen-positive sample as a whole (pamp;lt;0.05), mainly driven by a significant increase in brief intervention rates in England from 87% to 96% (pamp;lt;0.01). The study indicated that staff displayed a low level of engagement in this new technology. Staff continued to offer face-to-face advice to a larger proportion of patients (54%) than referral to eBI (38%). In addition, low engagement was seen among the referred patients; on average, 18% of the patients logged on to the website with a mean log-on rate across the different countries between 0.58% and 36.95%. Conclusions Referral to eBI takes nearly as much time as brief oral advice and might require more introduction and training before staff are comfortable with referring to eBI.
  •  
6.
  • Bendtsen, Preben, et al. (författare)
  • Professionals Attitudes Do Not Influence Screening and Brief Interventions Rates for Hazardous and Harmful Drinkers: Results from ODHIN Study
  • 2015
  • Ingår i: Alcohol and Alcoholism. - : Oxford University Press (OUP): Policy B - Oxford Open Option D. - 0735-0414 .- 1464-3502. ; 50:4, s. 430-437
  • Tidskriftsartikel (refereegranskat)abstract
    • To determine the relation between existing levels of alcohol screening and brief intervention rates in five European jurisdictions and role security and therapeutic commitment by the participating primary healthcare professionals. Health care professionals consisting of, 409 GPs, 282 nurses and 55 other staff including psychologists, social workers and nurse aids from 120 primary health care centres participated in a cross-sectional 4-week survey. The participants registered all screening and brief intervention activities as part of their normal routine. The participants also completed the Shortened Alcohol and Alcohol Problems Perception Questionnaire (SAAPPQ), which measure role security and therapeutic commitment. The only significant but small relationship was found between role security and screening rate in a multilevel logistic regression analysis adjusted for occupation of the provider, number of eligible patients and the random effects of jurisdictions and primary health care units (PHCU). No significant relationship was found between role security and brief intervention rate nor between therapeutic commitment and screening rate/brief intervention rate. The proportion of patients screened varied across jurisdictions between 2 and 10%. The findings show that the studied factors (role security and therapeutic commitment) are not of great importance for alcohol screening and BI rates. Given the fact that screening and brief intervention implementation rate has not changed much in the last decade in spite of increased policy emphasis, training initiatives and more research being published, this raises a question about what else is needed to enhance implementation.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-6 av 6

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy