| 1. |
- Bi, Zhaoxia, et al.
(författare)
-
Self-assembled InN quantum dots on side facets of GaN nanowires
- 2018
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 123:16
-
Tidskriftsartikel (refereegranskat)abstract
- Self-assembled, atomic diffusion controlled growth of InN quantum dots was realized on the side facets of dislocation-free and c-oriented GaN nanowires having a hexagonal cross-section. The nanowires were synthesized by selective area metal organic vapor phase epitaxy. A 3 Å thick InN wetting layer was observed after growth, on top of which the InN quantum dots formed, indicating self-assembly in the Stranski-Krastanow growth mode. We found that the InN quantum dots can be tuned to nucleate either preferentially at the edges between GaN nanowire side facets, or directly on the side facets by tuning the adatom migration by controlling the precursor supersaturation and growth temperature. Structural characterization by transmission electron microscopy and reciprocal space mapping show that the InN quantum dots are close to be fully relaxed (residual strain below 1%) and that the c-planes of the InN quantum dots are tilted with respect to the GaN core. The strain relaxes mainly by the formation of misfit dislocations, observed with a periodicity of 3.2 nm at the InN and GaN hetero-interface. The misfit dislocations introduce I1 type stacking faults (...ABABCBC...) in the InN quantum dots. Photoluminescence investigations of the InN quantum dots show that the emissions shift to higher energy with reduced quantum dot size, which we attribute to increased quantum confinement.
|
|
| 2. |
- Borgström, Magnus T., et al.
(författare)
-
Towards Nanowire Tandem Junction Solar Cells on Silicon
- 2018
-
Ingår i: IEEE Journal of Photovoltaics. - 2156-3381. ; 8:3, s. 733-740
-
Tidskriftsartikel (refereegranskat)abstract
- The development of photovoltaics as a serious means of producing renewable energy has accelerated greatly in the last ten years, with prices for silicon-based solar cell systems dropping dramatically in the last few years. The next great opportunity for photovoltaics following this competitiveness in prices will be to enhance the cell and panel efficiencies. It is quite generally seen that the most viable platform on which this should be realized will be as augmented silicon solar cells, in which a top cell will be combined with the silicon bottom cell in a tandem configuration, by which the efficiency can be enhanced by a factor from 20% to 50%, depending on details of the approach. In this paper, we report on the status of one such approach, namely, with a top cell comprising III-V nanowires, connected to the bottom silicon cell in a two-terminal or four-terminal configuration. Among the most important opportunities, we show that a substrate-free growth, called Aerotaxy, offers a radical reduction in the total price picture. Besides the description of the key technical approaches, we also discuss the environmental issues.
|
|
| 3. |
|
|
| 4. |
- Espinet-Gonzalez, Pilar, et al.
(författare)
-
Radiation Tolerant Nanowire Array Solar Cells
- 2019
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 13:11, s. 12860-12869
-
Tidskriftsartikel (refereegranskat)abstract
- Space power systems require photovoltaics that are lightweight, efficient, reliable, and capable of operating for years or decades in space environment. Current solar panels use planar multijunction, III-V based solar cells with very high efficiency, but their specific power (power to weight ratio) is limited by the added mass of radiation shielding (e.g., coverglass) required to protect the cells from the high-energy particle radiation that occurs in space. Here, we demonstrate that III-V nanowire-array solar cells have dramatically superior radiation performance relative to planar solar cell designs and show this for multiple cell geometries and materials, including GaAs and InP. Nanowire cells exhibit damage thresholds ranging from ∼10-40 times higher than planar control solar cells when subjected to irradiation by 100-350 keV protons and 1 MeV electrons. Using Monte Carlo simulations, we show that this improvement is due in part to a reduction in the displacement density within the wires arising from their nanoscale dimensions. Radiation tolerance, combined with the efficient optical absorption and the improving performance of nanowire photovoltaics, indicates that nanowire arrays could provide a pathway to realize high-specific-power, substrate-free, III-V space solar cells with substantially reduced shielding requirements. More broadly, the exceptional reduction in radiation damage suggests that nanowire architectures may be useful in improving the radiation tolerance of other electronic and optoelectronic devices.
|
|
| 5. |
- Hussain, Laiq, et al.
(författare)
-
Defect-induced infrared electroluminescence from radial GaInP/AlGaInP quantum well nanowire array light- emitting diodes
- 2017
-
Ingår i: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:48
-
Tidskriftsartikel (refereegranskat)abstract
- Radial GaInP/AlGaInP nanowire array light-emitting diodes (LEDs) are promising candidates for novel high-efficiency solid state lighting due to their potentially large strain-free active emission volumes compared to planar LEDs. Moreover, by proper tuning of the diameter of the nanowires, the fraction of emitted light extracted can be significantly enhanced compared to that of planar LEDs. Reports so far on radial growth of nanowire LED structures, however, still point to significant challenges related to obtaining defect-free radial heterostructures. In this work, we present evidence of optically active growth-induced defects in a fairly broad energy range in vertically processed radial GaInP/AlGaInP quantum well nanowire array LEDs using a variety of complementary experimental techniques. In particular, we demonstrate strong infrared electroluminescence in a spectral range centred around 1 eV (1.2 μm) in addition to the expected red light emission from the quantum well. Spatially resolved cathodoluminescence studies reveal a patchy red light emission with clear spectral features along the NWs, most likely induced by variations in QW thickness, composition and barriers. Dark areas are attributed to infrared emission generated by competing defect-assisted radiative transitions, or to trapping mechanisms involving non-radiative recombination processes. Possible origins of the defects are discussed.
|
|
| 6. |
- Jafari Jam, R., et al.
(författare)
-
Embedded sacrificial AlAs segments in GaAs nanowires for substrate reuse
- 2020
-
Ingår i: Nanotechnology. - Bristol : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 31:20
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the use of a sacrificial AlAs segment to enable substrate reuse for nanowire synthesis. A silicon nitride template was deposited on a p-type GaAs substrate. Then a pattern was transferred to the substrate by nanoimprint lithography and reactive ion etching. Thermal evaporation was used to define Au seed particles. Metalorganic vapour phase epitaxy was used to grow AlAs-GaAs NWs in the vapour-liquid-solid growth mode. The yield of synthesised nanowires, compared to the number expected from the patterned template, was more than 80%. After growth, the nanowires were embedded in a polymer and mechanically removed from the parent substrate. The parent substrate was then immersed in an HCl:H2O (1:1) mixture to dissolve the remaining stub of the sacrificial AlAs segment. The pattern fidelity was preserved after peeling off the nanowires and cleaning, and the semiconductor surface was flat and ready for reuse. Au seed particles were then deposited on the substrate by use of pulse electrodeposition, which was selective to the openings in the growth template, and then nanowires were regrown. The yield of regrowth was less optimal compared to the first growth but the pattern was preserved. Our results show a promising approach to reduce the final cost of III-V nanowire based solar cells. © 2020 The Author(s). Published by IOP Publishing Ltd.
|
|
| 7. |
- Jafari Jam, Reza
(författare)
-
Gold Electrodeposition in Semiconductor Nanowire Technology
- 2017
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Semiconductor nanowires are widely considered as promising candidates for next generations of electronics and optoelectronics. Gold seed particles have so far been recognized as the most important catalyst for growth of nanowires. Costs related to substrates, lithography processes and gold consumption most strongly influence the final cost of nanowire-based devices. An optimum gold deposition process can facilitate re-use of substrates, avoid repetitive lithogra-phy processes and reduce the gold consumption in order to reduce the cost of the final device. In this work, we report on nanowire seed definition by gold electrodeposition. Electron microscopy inspection and optical spectroscopy confirm that the subsequently grown III-V nanowires have surface morphology and crystal quality comparable to those of nanowires grown from seed particles defined by conventional thermal evaporation. For seeding of substrates used in a typical growth run, we used around 650 times less gold with a 10 times higher throughput as compared to thermal evaporation. Using selective gold electrodeposition, we demonstrated redeposition of seed particles on a substrate after nanowire peel-off in order to reuse it for multiple growth runs. We also demonstrated the possibility of depositing seed particles in deep holes etched in thick masks to facilitate template-assisted growth of nanowires on (001) substrates.
|
|
| 8. |
|
|
| 9. |
- Jain, Vishal, et al.
(författare)
-
Bias-dependent spectral tuning in InP nanowire-based photodetectors
- 2017
-
Ingår i: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:11
-
Tidskriftsartikel (refereegranskat)abstract
- Nanowire array ensembles contacted in a vertical geometry are extensively studied and considered strong candidates for next generations of industrial scale optoelectronics. Key challenges in this development deal with optimization of the doping profile of the nanowires and the interface between nanowires and transparent top contact. Here we report on photodetection characteristics associated with doping profile variations in InP nanowire array photodetectors. Bias-dependent tuning of the spectral shape of the responsivity is observed which is attributed to a Schottky-like contact at the nanowire-ITO interface. Angular dependent responsivity measurements, compared with simulated absorption spectra, support this conclusion. Furthermore, electrical simulations unravel the role of possible self-gating effects in the nanowires induced by the ITO/SiO x wrap-gate geometry. Finally, we discuss possible reasons for the observed low saturation current at large forward biases.
|
|
| 10. |
- Jain, Vishal, et al.
(författare)
-
InP/InAsP Nanowire-Based Spatially Separate Absorption and Multiplication Avalanche Photodetectors
- 2017
-
Ingår i: ACS Photonics. - Washington : American Chemical Society (ACS). - 2330-4022. ; 4:11, s. 2693-2698
-
Tidskriftsartikel (refereegranskat)abstract
- Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication region is implemented in a large band gap material is desired to avoid detrimental Zener tunneling leakage currents, a concern otherwise in smaller band gap materials required for absorption at 1.3/1.55 μm. Self-assembled III-V semiconductor nanowires offer key advantages such as enhanced absorption due to optical resonance effects, strain-relaxed heterostructures, and compatibility with mainstream silicon technology. Here, we present electrical and optical characteristics of single InP and InP/InAsP nanowire APD structures. Temperature-dependent breakdown characteristics of p+-n-n+ InP nanowire devices were investigated first. A clear trap-induced shift in breakdown voltage was inferred from I-V measurements. An improved contact formation to the p+-InP segment was observed upon annealing, and its effect on breakdown characteristics was investigated. The band gap in the absorption region was subsequently varied from pure InP to InAsP to realize spatially separate absorption and multiplication APDs in heterostructure nanowires. In contrast to the homojunction APDs, no trap-induced shifts were observed for the heterostructure APDs. A gain of 12 was demonstrated for selective optical excitation of the InAsP segment. Additional electron-beam-induced current measurements were carried out to investigate the effect of local excitation along the nanowire on the I-V characteristics. Simulated band profiles and electric field distributions support our interpretation of the experiments. Our results provide important insight for optimization of avalanche photodetector devices based on III-V nanowires.
|
|
