| 1. |
|
|
| 2. |
|
|
| 3. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Schael, S., et al.
(författare)
-
Electroweak measurements in electron positron collisions at W-boson-pair energies at LEP
- 2013
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 532:4, s. 119-244
-
Forskningsöversikt (refereegranskat)abstract
- Electroweak measurements performed with data taken at the electron positron collider LEP at CERN from 1995 to 2000 are reported. The combined data set considered in this report corresponds to a total luminosity of about 3 fb(-1) collected by the four LEP experiments ALEPH, DELPHI, 13 and OPAL, at centre-of-mass energies ranging from 130 GeV to 209 GeV. Combining the published results of the four LEP experiments, the measurements include total and differential cross-sections in photon-pair, fermion-pair and four-fermion production, the latter resulting from both double-resonant WW and ZZ production as well as singly resonant production. Total and differential cross-sections are measured precisely, providing a stringent test of the Standard Model at centre-of-mass energies never explored before in electron positron collisions. Final-state interaction effects in four-fermion production, such as those arising from colour reconnection and Bose Einstein correlations between the two W decay systems arising in WW production, are searched for and upper limits on the strength of possible effects are obtained. The data are used to determine fundamental properties of the W boson and the electroweak theory. Among others, the mass and width of the W boson, m(w) and Gamma(w), the branching fraction of W decays to hadrons, B(W -> had), and the trilinear gauge-boson self-couplings g(1)(Z), K-gamma and lambda(gamma), are determined to be: m(w) = 80.376 +/- 0.033 GeV Gamma(w) = 2.195 +/- 0.083 GeV B(W -> had) = 67.41 +/- 0.27% g(1)(Z) = 0.984(-0.020)(+0.018) K-gamma - 0.982 +/- 0.042 lambda(gamma) = 0.022 +/- 0.019. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Zhang, Man, et al.
(författare)
-
Terahertz Reading of Ferroelectric Domain Wall Dielectric Switching
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:10, s. 12622-12628
-
Tidskriftsartikel (refereegranskat)abstract
- Ferroelectric domain walls (DWs) are important nanoscale interfaces between two domains. It is widely accepted that ferroelectric domain walls work idly at terahertz (THz) frequencies, consequently discouraging efforts to engineer the domain walls to create new applications that utilize THz radiation. However, the present work clearly demonstrates the activity of domain walls at THz frequencies in a lead-free Aurivillius phase ferroelectric ceramic, Ca0.99Rb0.005Ce0.005Bi2Nb2O9, examined using THz-time-domain spectroscopy (THz-TDS). The dynamics of domain walls are different at kHz and THz frequencies. At low frequencies, domain walls work as a group to increase dielectric permittivity. At THz frequencies, the defective nature of domain walls serves to lower the overall dielectric permittivity. This is evidenced by higher dielectric permittivity in the THz band after poling, reflecting decreased domain wall density. An elastic vibrational model has also been used to verify that a single frustrated dipole in a domain wall represents a weaker contribution to the permittivity than its counterpart within a domain. The work represents a fundamental breakthrough in understanding the dielectric contributions of domain walls at THz frequencies. It also demonstrates that THz probing can be used to read domain wall dielectric switching.
|
|
| 6. |
- Ahmed, Shafique, et al.
(författare)
-
Terahertz probing of low-temperature degradation in zirconia bioceramics
- 2022
-
Ingår i: Journal of The American Ceramic Society. - : Wiley. - 0002-7820 .- 1551-2916. ; 105:2, s. 1106-1115
-
Tidskriftsartikel (refereegranskat)abstract
- ZrO2-based ceramics are widely used in biomedical applications due to its color, biocompatibility, and excellent mechanical properties. However, low-temperature degradation (LTD) introduces a potential risk for long-term reliability of these materials. The development of innovative nondestructive techniques, which can explore LTD in zirconia-derived compounds, is strongly required. Yttria stabilized zirconia, 3Y-TZP, is one of the well-developed ZrO2-based ceramics with improved resistance to LTD for dental crown and implant applications. Here, 3Y-TZP ceramic powders were pressed and sintered to study the LTD phenomenon by phase transition behavior. The LTD-driven tetragonal-to-monoclinic phase transition was confirmed by XRD. XPS analysis demonstrated that induced LTD reduced the oxygen vacancies which supports these findings. It is proved that after the degradation, the 3Y-TZP ceramics show the decreased dielectric permittivity at terahertz frequencies due to the crystallographic phase transformation. Terahertz nondestructive probe is a promising method to investigate LTD in zirconia ceramics.
|
|
| 7. |
- Luo, Shijian, et al.
(författare)
-
RoamFab : A Design Tool for Reconfiguring Parameterized Mechanisms to 3D Models With Structural Optimization
- 2023
-
Ingår i: International Journal of Human-Computer Interaction. - : Informa UK Limited. - 1044-7318 .- 1532-7590. ; 39:19, s. 3702-3716
-
Tidskriftsartikel (refereegranskat)abstract
- Creating personalized 3D printing objects has become increasingly popular with the advance in end-user modeling tools and fabrication techniques. However, it remains challenging for novice makers to design and fabricate functional objects with mechanical motion such as linear or rotational. To empower users to add mechanical movements to their models for particular needs, we first investigate the commonly used 3D printable mechanisms and parameterize four mechanical primitives. We then provide a computational approach to reconfigure the mechanical primitives to user-provided 3D models, with an underlying structural optimization procedure according to a specified bending force. We further showcase a set of design examples and conduct a user study to demonstrate the potential of our approach in creating personalized functional artifacts.
|
|
| 8. |
- Yang, Jie, et al.
(författare)
-
Direct observation of ultrafast hydrogen bond strengthening in liquid water
- 2021
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 596:7873
-
Tidskriftsartikel (refereegranskat)abstract
- Water is one of the most important, yet least understood, liquids in nature. Many anomalous properties of liquid water originate from its well-connected hydrogen bond network, including unusually efficient vibrational energy redistribution and relaxation2. An accurate description of the ultrafast vibrational motion of water molecules is essential for understanding the nature of hydrogen bonds and many solution-phase chemical reactions. Most existing knowledge of vibrational relaxation in water is built upon ultrafast spectroscopy experiments. However, these experiments cannot directly resolve the motion of the atomic positions and require difficult translation of spectral dynamics into hydrogen bond dynamics. Here, we measure the ultrafast structural response to the excitation of the OH stretching vibration in liquid water with femtosecond temporal and atomic spatial resolution using liquid ultrafast electron scattering. We observed a transient hydrogen bond contraction of roughly 0.04 Å on a timescale of 80 femtoseconds, followed by a thermalization on a timescale of approximately 1 picosecond. Molecular dynamics simulations reveal the need to treat the distribution of the shared proton in the hydrogen bond quantum mechanically to capture the structural dynamics on femtosecond timescales. Our experiment and simulations unveil the intermolecular character of the water vibration preceding the relaxation of the OH stretch.
|
|
| 9. |
- Yang, Yi, et al.
(författare)
-
A Zn-MOF constructed from electron-rich pi-conjugated ligands with an interpenetrated graphene-like net as an efficient nitroaromatic sensor
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:51, s. 45475-45481
-
Tidskriftsartikel (refereegranskat)abstract
- A novel zinc-based luminescent metal-organic framework (Zn-MOF) has been successfully constructed based on a designed flexible and electron-rich N-involved linker (HL = 4-(bis(4-(pyridin-4-yl) phenyl) amino) benzoic acid). The framework of this Zn-MOF exhibits a 2-fold interpenetrated network which is composed of (3,3)-c sheets. The Zn-MOF has a strong solid state emission at 512 nm. The luminescence signal of the Zn-MOF can be quenched efficiently by trace amounts of electron-deficient nitroaromatics, especially 2,4,6-trinitrophenol (TNP). The quenching constant (K-sv) for TNP is 2.11 x 10(4) M-1, indicating that this framework can be employed as an excellent chemical sensor for identifying and quantifying TNP. This work highlights a strategy for designing a N-involved p-electron-rich enhanced ligand with nucleophilic properties for MOF-based materials as sensors. It also paves the way toward exploring other more efficient MOF materials as sensors for determining electron-deficient nitroaromatics.
|
|
