| 1. |
- Marconi, Alessandro, et al.
(författare)
-
ELT-HIRES, the high resolution spectrograph for the ELT : Phase A study and path to construction
- 2020
-
Ingår i: Ground-based and Airborne Instrumentation for Astronomy VIII. - : SPIE - International Society for Optical Engineering. - 9781510636828 - 9781510636811
-
Konferensbidrag (refereegranskat)abstract
- HIRES is the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 µm (goal 0.35-2.4 µm) at a spectral resolution of 100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing- and diffraction-limited modes. Its modularity will ensure that HIRES can be placed entirely on the Nasmyth platform, if enough mass and volume is available, or part on the Nasmyth and part in the Coud`e room. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers.
|
|
| 2. |
|
|
| 3. |
- Marconi, A., et al.
(författare)
-
ELT-HIRES, the high resolution spectrograph for the ELT : results from the Phase A study
- 2018
-
Ingår i: GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY VII. - : SPIE-INT SOC OPTICAL ENGINEERING. - 9781510619586
-
Konferensbidrag (refereegranskat)abstract
- We present the results from the phase A study of ELT-HIRES, an optical-infrared High Resolution Spectrograph for ELT, which has just been completed by a consortium of 30 institutes from 12 countries forming a team of about 200 scientists and engineers. The top science cases of ELT-HIRES will be the detection of life signatures from exoplanet atmospheres, tests on the stability of Nature's fundamental couplings, the direct detection of the cosmic acceleration. However, the science requirements of these science cases enable many other groundbreaking science cases. The baseline design, which allows to fulfil the top science cases, consists in a modular fiber fed cross-dispersed echelle spectrograph with two ultra-stable spectral arms providing a simultaneous spectral range of 0.4-1.8 pm at a spectral resolution of 100, 000. The fiber-feeding allows ELT-HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Lu, W., et al.
(författare)
-
Application of combinatorial material chip method on the improvement of quantum dots emission efficiency
- 2004
-
Ingår i: Proceedings of the SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 5277:1, s. 99-108
-
Konferensbidrag (refereegranskat)abstract
- The combinatorial material chip method has been used to study the emission efficiency of InAs/GaAs quantum dots. The photoluminescence spectroscopy is performed to obtain the rule of emission efficiency on the proton implantation dose. A pronounced enhancement of room temperature emission efficiency has been obtained by the optimized quantum dots process condition. The increment of emission efficiency up to 80 itmes has been observed. This effect may be resulted from both the proton passivation and carrier capture enhancement effects. The maximum photoluminescence peak shift is about 23 meV resulted from the intermixing of quantum dots. A linear dependence behavior has been observed for both the non-radiative recombination time and carrier relaxation time on the ion-implantation dose. The maximum enhancement of the photoluminescence is observed in the proton implantation dose of 1.0 x 1014 cm-2 followed by rapid thermal annealing at 700°C. These effects will be useful for the QDs' optoelectronic devices.
|
|
| 10. |
|
|
