| 1. |
- Meyer, H.F., et al.
(författare)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
| 2. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 3. |
- Castro-González, A., et al.
(författare)
-
The K2-OjOS Project*New and revisited planets and candidates in K2 campaigns 5, 16, & 18
- 2022
-
Ingår i: Monthly Notices of the Royal Astronomical Society. - : Oxford University Press (OUP). - 0035-8711 .- 1365-2966. ; 509:1, s. 1075-1095
-
Tidskriftsartikel (refereegranskat)abstract
- We present the first results of K2-OjOS, a collaborative project between professional and amateur astronomers primarily aimed to detect, characterize, and validate new extrasolar planets. For this work, 10 amateur astronomers looked for planetary signals by visually inspecting the 20 427 light curves of K2 campaign 18 (C18). They found 42 planet candidates, of which 18 are new detections and 24 had been detected in the overlapping C5 by previous works. We used archival photometric and spectroscopic observations, as well as new high-spatial resolution images in order to carry out a complete analysis of the candidates found, including a homogeneous characterization of the host stars, transit modelling, search for transit timing variations and statistical validation. As a result, we report four new planets (K2-355 b, K2-356 b, K2-357 b, and K2-358 b) and 14 planet candidates. Besides, we refine the transit ephemeris of the previously published planets and candidates by modelling C5, C16 (when available) and C18 photometric data jointly, largely improving the period and mid-transit time precision. Regarding individual systems, we highlight the new planet K2-356 b and candidate EPIC 211537087.02 being near a 2:1 period commensurability, the detection of significant TTVs in the bright star K2-184 (V = 10.35), the location of K2-103 b inside the habitable zone according to optimistic models, the detection of a new single transit in the known system K2-274, and the disposition reassignment of K2-120 b, which we consider as a planet candidate as the origin of the signal cannot be ascertained.
|
|
| 4. |
- Martins Dos Santos, Vitor, et al.
(författare)
-
Systems Biology in ELIXIR: modelling in the spotlight
- 2022
-
Ingår i: F1000Research. - : F1000 Research Ltd. - 1759-796X .- 2046-1402. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- In this white paper, we describe the founding of a new ELIXIR Community - the Systems Biology Community - and its proposed future contributions to both ELIXIR and the broader community of systems biologists in Europe and worldwide. The Community believes that the infrastructure aspects of systems biology - databases, (modelling) tools and standards development, as well as training and access to cloud infrastructure - are not only appropriate components of the ELIXIR infrastructure, but will prove key components of ELIXIR's future support of advanced biological applications and personalised medicine. By way of a series of meetings, the Community identified seven key areas for its future activities, reflecting both future needs and previous and current activities within ELIXIR Platforms and Communities. These are: overcoming barriers to the wider uptake of systems biology; linking new and existing data to systems biology models; interoperability of systems biology resources; further development and embedding of systems medicine; provisioning of modelling as a service; building and coordinating capacity building and training resources; and supporting industrial embedding of systems biology. A set of objectives for the Community has been identified under four main headline areas: Standardisation and Interoperability, Technology, Capacity Building and Training, and Industrial Embedding. These are grouped into short-term (3-year), mid-term (6-year) and long-term (10-year) objectives.
|
|
| 5. |
- Suárez-Almeida, Montserrat, et al.
(författare)
-
Simulation of the Transient Response of a Fluidized Bed Gasifier for Hybridized Concentrated Solar Thermal Power Plant
- 2018
-
Ingår i: 23rd International Conference on Fluidized Bed Conversion - Innovative Fluidized Bed Conversion Technology for a Sustainable Development. - 9788995000571 ; 1
-
Konferensbidrag (refereegranskat)abstract
- A model to predict the dynamic response of a fluidized bed biomass gasifier (FBG) to changes in air and fuel feed rates is developed. It extends a previous pseudo-equilibrium model originally developed for steady-state operation, by considering the accumulation of char and the dynamics in the release of volatiles during transient periods. The model calculates the gas yields of the main species as well as char conversion, taking into account chemical reaction, attrition and elutriation. The influence of the change in fuel and air flowrate, on the syngas flowrate, heating value, and bed inventory of char is analyzed. Two transient periods in an FBG after a change of feed rate are shown: a devolatilization transient, lasting a few seconds, followed by a longer transient (from minutes to hours) resulting from the char accommodation until a new steady state is reached. The model is being used to assess the dynamic performance of the backup and storage system in biomass-hybridized concentrated solar power (CSP) plants.
|
|
| 6. |
- Kehoe, Laura, et al.
(författare)
-
Make EU trade with Brazil sustainable
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
- Suárez, A., et al.
(författare)
-
Surface integrity and fatigue of non-conventional machined Alloy 718
- 2019
-
Ingår i: Journal of Manufacturing Processes. - : Elsevier Ltd. - 1526-6125 .- 2212-4616. ; 48, s. 44-50
-
Tidskriftsartikel (refereegranskat)abstract
- Alloy 718 is a high-strength, corrosion-resistant nickel chromium-based superalloy frequently used for applications, such as aerospace, marine, nuclear reactor and chemical industries, due to its outstanding inherent properties such as high strength and corrosion resistance at high temperatures together with good creep behaviour. Although, the use of conventional manufacturing processes is prevalent for their use on Alloy 718, alternative manufacturing technologies are gaining importance. This work compares the effects of alternative manufacturing processes, such as Abrasive water jet (AWJ), Wire Electrical Discharge Machining (WEDM) and ultrasound vibration assisted milling (UVAM) with conventional milling during the manufacture of Alloy 718 parts. Surface integrity, hardness, residual stress and fatigue strength obtained from these machining processes have been examined for cutting alloy 718. Results show that both residual stresses and surface roughness are correlated with fatigue strength. UVAM results shown an improvement on the surface integrity of the final workpiece. AWJ and WEDM show poorer results, further work on post-process technologies or process condition selection must be carry out to establish them as an alternative in Alloy 718 cutting operations.
|
|
| 8. |
- Suárez-Almeida, M., et al.
(författare)
-
Modeling the transient response of a fluidized-bed biomass gasifier
- 2020
-
Ingår i: Fuel. - : Elsevier BV. - 0016-2361. ; 274
-
Tidskriftsartikel (refereegranskat)abstract
- The dynamic response of a bubbling fluidized-bed biomass gasifier (FBG) is examined. A transient model is developed by extending a previous steady-state model to account for key processes occurring during the ramp-up and/or changes in loading of fuel and gasification agent. The model is validated against measurements from transient tests in a laboratory-scale FBG. The model results are also compared with steady-state measurements and previous FBG models from the literature. A sensitivity analysis is performed to identify the most influencing parameters. The model is then used to study the transient response of industrial FBG under different operating conditions. It is shown that for given operational conditions (biomass flowrate, equivalence ratio, initial temperature, and initial char inventory in the bed), there is always an optimal start-up procedure (rate of change in feeding the gasifying agent and/or the fuel) leading to the shortest start-up time and lowest peak temperature. The transient period can be reduced by up to 75% compared to the reference value, in which the transient response can extend for more than an hour, due to the slow change in the inventory of char in the reactor. The model can be used to optimize the operation of hybridized power plants with biomass gasification and thermal energy storage.
|
|
| 9. |
- Suarez, David Orozco, et al.
(författare)
-
CMAG : A Mission to Study and Monitor the Inner Corona Magnetic Field
- 2023
-
Ingår i: Aerospace. - 2226-4310. ; 10:12
-
Tidskriftsartikel (refereegranskat)abstract
- Measuring magnetic fields in the inner corona, the interface between the solar chromosphere and outer corona, is of paramount importance if we aim to understand the energetic transformations taking place there, and because it is at the origin of processes that lead to coronal heating, solar wind acceleration, and of most of the phenomena relevant to space weather. However, these measurements are more difficult than mere imaging because polarimetry requires differential photometry. The coronal magnetograph mission (CMAG) has been designed to map the vector magnetic field, line-of-sight velocities, and plane-of-the-sky velocities of the inner corona with unprecedented spatial and temporal resolutions from space. This will be achieved through full vector spectropolarimetric observations using a coronal magnetograph as the sole instrument on board a spacecraft, combined with an external occulter installed on another spacecraft. The two spacecraft will maintain a formation flight distance of 430 m for coronagraphic observations, which requires a 2.5 m occulter disk radius. The mission will be preferentially located at the Lagrangian L5 point, offering a significant advantage for solar physics and space weather research. Existing ground-based instruments face limitations such as atmospheric turbulence, solar scattered light, and long integration times when performing coronal magnetic field measurements. CMAG overcomes these limitations by performing spectropolarimetric measurements from space with an external occulter and high-image stability maintained over time. It achieves the necessary sensitivity and offers a spatial resolution of 2.5 '' and a temporal resolution of approximately one minute, in its nominal mode, covering the range from 1.02 solar radii to 2.5 radii. CMAG relies on proven European technologies and can be adapted to enhance any other solar mission, offering potential significant advancements in coronal physics and space weather modeling and monitoring.
|
|
