| 1. |
|
|
| 2. |
- Huang, Hongyun, et al.
(författare)
-
Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)
- 2018
-
Ingår i: Cell Transplantation. - : SAGE Publications. - 0963-6897 .- 1555-3892. ; 27:2, s. 310-324
-
Forskningsöversikt (refereegranskat)abstract
- Cell therapy has been shown to be a key clinical therapeutic option for central nervous system diseases or damage. Standardization of clinical cell therapy procedures is an important task for professional associations devoted to cell therapy. The Chinese Branch of the International Association of Neurorestoratology (IANR) completed the first set of guidelines governing the clinical application of neurorestoration in 2011. The IANR and the Chinese Association of Neurorestoratology (CANR) collaborated to propose the current version "Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)". The IANR council board members and CANR committee members approved this proposal on September 1, 2016, and recommend it to clinical practitioners of cellular therapy. These guidelines include items of cell type nomenclature, cell quality control, minimal suggested cell doses, patient-informed consent, indications for undergoing cell therapy, contraindications for undergoing cell therapy, documentation of procedure and therapy, safety evaluation, efficacy evaluation, policy of repeated treatments, do not charge patients for unproven therapies, basic principles of cell therapy, and publishing responsibility.
|
|
| 3. |
- Sun, Tao, et al.
(författare)
-
Algorithm for Surfaces Profiles and Thickness Variation Measurement of a Transparent Plate Using a Fizeau Interferometer with Wavelength Tuning
- 2019
-
Ingår i: Applied Sciences. - : MDPI. - 2076-3417. ; 9:11
-
Tidskriftsartikel (refereegranskat)abstract
- An interferogram obtained from a transparent plate contains information on the profiles of both surfaces and on the thickness variation. The present work is devoted to the processing of interferograms of this type. The processing technique is based on a 36-step algorithm developed by the authors for characterization of transparent plates having approximately equal reflections from both sides. The algorithm utilizes weighted multi-step phase shifting that enables one not only separately to extract the front and rear surface profiles together with the thickness variation of the tested plate but also to suppress the coupling errors between the higher harmonics and phase-shift deviation. The proposed measuring method was studied on a wavelength tunable Fizeau interferometer. The tested sample had an optical thickness and surface profile deviations equal to 0.51 µm, 1.38 µm and 0.89 µm, respectively. According to the results obtained using 10 repeated measurements, the root mean square (RMS) errors for determining both surface profiles did not exceed 1.5 nm. Experimental results show that the setup and presented 36-step algorithm are suitable for the measurement of a transparent plate of arbitrary thickness.
|
|
| 4. |
- Sun, Tao, et al.
(författare)
-
Calibration of Tunable Diode Laser Wavelength Based on Energy Centrobaric Correction Method for Discrete Spectrum
- 2018
-
Ingår i: SIXTH INTERNATIONAL CONFERENCE ON OPTICAL AND PHOTONIC ENGINEERING (ICOPEN 2018). - : SPIE-INT SOC OPTICAL ENGINEERING. - 9781510622579
-
Konferensbidrag (refereegranskat)abstract
- The resolution of wavelength scanning of diode laser can influence the performance of interferometer mostly. In this article, we propose a method to improve the precision of wavelength calibration by using the theory of energy centrobaric correction for discrete spectrum. An optical wedge whose angle of tilt was known has been set in the optical system to measure the series of wavelength on time using a 2D Fourier Transfer (FT) of the interferograms generated by both surfaces of optical wedge. An energy centrobaric correction method is also put forward to evaluate the distribution of frequency and phase of fringe pattern generated by front and rear surface of optical wedge. The results of simulation and experiment show that the error of wavelength calibration reach to 0.01pm by correlating the distribution of frequency and phase of interferograms. The benefit is that the precision of wavelength of diode laser is improved significantly with a higher signal-to-noise ratio. This method can used to any tunable diode laser wavelength to improve the precision of measurement due to its simplicity and practicability.
|
|
| 5. |
- Sun, Tao, et al.
(författare)
-
Determination of surface profiles of transparent plates by means of laser interferometry with wavelength tuning
- 2019
-
Ingår i: Optics and lasers in engineering. - : ELSEVIER SCI LTD. - 0143-8166 .- 1873-0302. ; 115, s. 59-66
-
Tidskriftsartikel (refereegranskat)abstract
- An interferogram obtained from a transparent plate contains information about the profiles of both surfaces of the plate. This information can be extracted by processing fringe patterns measured at different wavelengths. The conventional Fourier analysis applied to solve such problems for a set of a restricted number of the fringe patterns is quite sensitive to the error of detuning the wavelength shifting and suffers from fringe patterns interference noise. This study proposes a method for finding surface profiles of a transparent plate using a series of fringe patterns obtained at different phase shifts caused by wavelength changes. The data treatment is based on the analytical approach for describing spatial distributions of irradiance in interference patterns. The results show that the proposed method is feasible. The experimental setup used herein was a Fizeau interferometer with tunable wavelength laser. A glass plate approximately 1 cm thick was as the test sample. According to the obtained results, the root mean square (RMS) errors for determining both surface profiles did not exceed 2.3 nm.
|
|
