SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Wang H) ;lar1:(ltu)"

Sökning: WFRF:(Wang H) > Luleå tekniska universitet

  • Resultat 1-10 av 33
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  •  
2.
  • Bentham, James, et al. (författare)
  • A century of trends in adult human height
  • 2016
  • Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
  • Tidskriftsartikel (refereegranskat)abstract
    • Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
  •  
3.
  • Zhou, Bin, et al. (författare)
  • Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
  • 2016
  • Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
  • Tidskriftsartikel (refereegranskat)abstract
    • Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
  •  
4.
  • Abele, H., et al. (författare)
  • Particle physics at the European Spallation Source
  • 2023
  • Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
  • Forskningsöversikt (refereegranskat)abstract
    • Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
  •  
5.
  • Wang, D.Y., et al. (författare)
  • Validation of nitric acid retrieved by the IMK-IAA processor from MIPAS/ENVISAT measurements
  • 2007
  • Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 7, s. 721-738
  • Tidskriftsartikel (refereegranskat)abstract
    • The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) onboard the ENVISAT satellite provides profiles of temperature and various trace-gases from limb-viewing mid-infrared emission measurements. The stratospheric nitric acid (HNO(3)) from September 2002 to March 2004 was retrieved from the MIPAS observations using the science-oriented data processor developed at the Institut fur Meteorologie und Klimaforschung (IMK), which is complemented by the component of non-local thermodynamic equilibrium (non-LTE) treatment from the Instituto de Astrofisica de Andalucia (IAA). The IMK-IAA research product, different from the ESA operational product, is validated in this paper by comparison with a number of reference data sets. Individual HNO3 profiles of the IMK-IAA MIPAS show good agreement with those of the balloon-borne version of MIPAS (MIPAS-B) and the infrared spectrometer MkIV, with small differences of less than 0.5 ppbv throughout the entire altitude range up to about 38 km, and below 0.2 ppbv above 30 km. However, the degree of consistency is largely affected by their temporal and spatial coincidence, and differences of 1 to 2 ppbv may be observed between 22 and 26 km at high latitudes near the vortex boundary, due to large horizontal inhomogeneity of HNO(3). Statistical comparisons of MIPAS IMK-IAA HNO(3) VMRs with respect to those of satellite measurements of Odin/SMR, ILAS-II, ACE-FTS, as well as the MIPAS ESA product show good consistency. The mean differences are generally +/- 0.5 ppbv and standard deviations of the differences are of 0.5 to 1.5 ppbv. The maximum differences are 2.0 ppbv around 20 to 25 km. This gives confidence in the general reliability of MIPAS HNO(3) VMR data and the other three satellite data sets.
  •  
6.
  • Pöntinen, M., et al. (författare)
  • Euclid: Identification of asteroid streaks in simulated images using deep learning
  • 2023
  • Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 679
  • Tidskriftsartikel (refereegranskat)abstract
    • The material composition of asteroids is an essential piece of knowledge in the quest to understand the formation and evolution of the Solar System. Visual to near-infrared spectra or multiband photometry is required to constrain the material composition of asteroids, but we currently have such data, especially in the near-infrared wavelengths, for only a limited number of asteroids. This is a significant limitation considering the complex orbital structures of the asteroid populations. Up to 150 000 asteroids will be visible in the images of the upcoming ESA Euclid space telescope, and the instruments of Euclid will offer multiband visual to near-infrared photometry and slitless near-infrared spectra of these objects. Most of the asteroids will appear as streaks in the images. Due to the large number of images and asteroids, automated detection methods are needed. A non-machine-learning approach based on the Streak Det software was previously tested, but the results were not optimal for short and/or faint streaks. We set out to improve the capability to detect asteroid streaks in Euclid images by using deep learning. We built, trained, and tested a three-step machine-learning pipeline with simulated Euclid images. First, a convolutional neural network (CNN) detected streaks and their coordinates in full images, aiming to maximize the completeness (recall) of detections. Then, a recurrent neural network (RNN) merged snippets of long streaks detected in several parts by the CNN. Lastly, gradient-boosted trees (XGBoost) linked detected streaks between different Euclid exposures to reduce the number of false positives and improve the purity (precision) of the sample. The deep-learning pipeline surpasses the completeness and reaches a similar level of purity of a non-machine-learning pipeline based on the StreakDet software. Additionally, the deep-learning pipeline can detect asteroids 0.25–0.5 magnitudes fainter than StreakDet. The deep-learning pipeline could result in a 50% increase in the number of detected asteroids compared to the StreakDet software. There is still scope for further refinement, particularly in improving the accuracy of streak coordinates and enhancing the completeness of the final stage of the pipeline, which involves linking detections across multiple exposures.
  •  
7.
  • Yi, J.-H., et al. (författare)
  • Behavior of crossover operators in NSGA-III for large-scale optimization problems
  • 2020
  • Ingår i: Information Sciences. - : Elsevier. - 0020-0255 .- 1872-6291. ; 509, s. 470-487
  • Tidskriftsartikel (refereegranskat)abstract
    • Traditional multi-objective optimization evolutionary algorithms (MOEAs) do not usually meet the requirements for online data processing because of their high computational costs. This drawback has resulted in difficulties in the deployment of MOEAs for multi-objective, large-scale optimization problems. Among different evolutionary algorithms, non-dominated sorting genetic algorithm-the third version (NSGA-III) is a fairly new method capable of solving large-scale optimization problems with acceptable computational requirements. In this paper, the performance of three crossover operators of the NSGA-III algorithm is benchmarked using a large-scale optimization problem based on human electroencephalogram (EEG) signal processing. The studied operators are simulated binary (SBX), uniform crossover (UC), and single point (SI) crossovers. Furthermore, enhanced versions of the NSGA-III algorithm are proposed through introducing the concept of Stud and designing several improved crossover operators of SBX, UC, and SI. The performance of the proposed NSGA-III variants is verified on six large-scale optimization problems. Experimental results indicate that the NSGA-III methods with UC and UC-Stud (UCS) outperform the other developed variants.
  •  
8.
  • Dou, S.X., et al. (författare)
  • Microstructure and flux pinning in superconducting Bi-Pb-Sr-Ca-Cu-O wires
  • 1990
  • Ingår i: Physica. C, Superconductivity. - 0921-4534 .- 1873-2143. ; 172:1-2, s. 63-70
  • Tidskriftsartikel (refereegranskat)abstract
    • The critical current density (Jc) of Ag-clad Bi-Pb-Sr-Ca-Cu-O wire has been measured to be 1.2×104 A/cm2 at 77 K in zero field. The high Jc is attributed to a combination of elimination of the poisoning effect of Ag on superconductivity, grain alignment, and enhancement of flux pinning. Jc-H dependence was significantly improved in the Ag-clad tape, which has a Jc of 1.0×103 A /cm2 at 77 K and 4000 Oe, while the Jc of the sintered pellet drops two orders of magnitude at only 100 Oe. A pronounced anisotropy in Jc under high magnetic field is attributed to the grain alignment. Planar defects, such as heavy stacking faults parallel to the a-b plane in the rolled tape, are considered to be effective pinning centres.
  •  
9.
  • Jones, Geraint H., et al. (författare)
  • The Comet Interceptor Mission
  • 2024
  • Ingår i: Space Science Reviews. - : Springer Nature. - 0038-6308 .- 1572-9672. ; 220:1
  • Tidskriftsartikel (refereegranskat)abstract
    • Here we describe the novel, multi-point Comet Interceptor mission. It is dedicated to the exploration of a little-processed long-period comet, possibly entering the inner Solar System for the first time, or to encounter an interstellar object originating at another star. The objectives of the mission are to address the following questions: What are the surface composition, shape, morphology, and structure of the target object? What is the composition of the gas and dust in the coma, its connection to the nucleus, and the nature of its interaction with the solar wind? The mission was proposed to the European Space Agency in 2018, and formally adopted by the agency in June 2022, for launch in 2029 together with the Ariel mission. Comet Interceptor will take advantage of the opportunity presented by ESA’s F-Class call for fast, flexible, low-cost missions to which it was proposed. The call required a launch to a halo orbit around the Sun-Earth L2 point. The mission can take advantage of this placement to wait for the discovery of a suitable comet reachable with its minimum Δ V capability of 600 ms − 1 . Comet Interceptor will be unique in encountering and studying, at a nominal closest approach distance of 1000 km, a comet that represents a near-pristine sample of material from the formation of the Solar System. It will also add a capability that no previous cometary mission has had, which is to deploy two sub-probes – B1, provided by the Japanese space agency, JAXA, and B2 – that will follow different trajectories through the coma. While the main probe passes at a nominal 1000 km distance, probes B1 and B2 will follow different chords through the coma at distances of 850 km and 400 km, respectively. The result will be unique, simultaneous, spatially resolved information of the 3-dimensional properties of the target comet and its interaction with the space environment. We present the mission’s science background leading to these objectives, as well as an overview of the scientific instruments, mission design, and schedule.
  •  
10.
  • Kulatilake, P.H.S.W., et al. (författare)
  • Use of the distinct element method to perform stress analysis in rock with non-persistent joints and to study the effect of joint geometry parameters on the strength and deformability of rock masses
  • 1992
  • Ingår i: Rock Mechanics and Rock Engineering. - 0723-2632 .- 1434-453X. ; 25:4, s. 253-274
  • Tidskriftsartikel (refereegranskat)abstract
    • To use the distinct element method, it is necessary to discretize the problem domain into polygons in two dimensions (2 D) or into polyhedra in three dimensions (3 D). To perform distinct element stress analysis in a rock mass which contains non-persistent finite size joints, it is necessary to generate some type of fictitious joints so that when they are combined with the non-persistent joints, they discretize the problem domain into polygons in 2 D or into polyhedra in 3 D. The question arises as to which deformation and strength parameter values should be assigned to these fictitious joints so that they behave as intact rock. In this paper, linear elastic, perfectly-plastic constitutive models with the Mohr-Coulomb failure criterion, including a tension cut-off, were used to represent the mechanical behaviour of both intact rock and fictitious joints. It was found that, by choosing the parameter values for the constitutive models as given below, it is possible to make the fictitious joints behave as intact rock, in a global sense
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 33
Typ av publikation
tidskriftsartikel (22)
konferensbidrag (9)
forskningsöversikt (2)
Typ av innehåll
refereegranskat (32)
övrigt vetenskapligt/konstnärligt (1)
Författare/redaktör
Forssberg, Eric (4)
Ikram, M. Arfan (4)
Lehtimäki, Terho (4)
Fischer, H. (3)
Salomaa, Veikko (3)
Lundqvist, Annamari (3)
visa fler...
Wang, D. Y. (3)
Giwercman, Aleksande ... (3)
Wade, Alisha N. (3)
Cooper, Cyrus (3)
Hardy, Rebecca (3)
Brenner, Hermann (3)
Claessens, Frank (3)
Sjostrom, Michael (3)
Adams, Robert (3)
Thijs, Lutgarde (3)
Staessen, Jan A (3)
Björkelund, Cecilia, ... (3)
Farzadfar, Farshad (3)
Geleijnse, Johanna M ... (3)
Guessous, Idris (3)
Jonas, Jost B. (3)
Kasaeian, Amir (3)
Khader, Yousef Saleh (3)
Khang, Young-Ho (3)
Mohan, Viswanathan (3)
Nagel, Gabriele (3)
Qorbani, Mostafa (3)
Rivera, Juan A. (3)
Alkerwi, Ala'a (3)
Bjertness, Espen (3)
Kengne, Andre P. (3)
McGarvey, Stephen T. (3)
Shiri, Rahman (3)
Huybrechts, Inge (3)
Finn, Joseph D. (3)
Casanueva, Felipe F. (3)
Kula, Krzysztof (3)
Punab, Margus (3)
Vanderschueren, Dirk (3)
Nguyen, Nguyen D (3)
Thuesen, Betina H. (3)
Chetrit, Angela (3)
Anjana, Ranjit Mohan (3)
Pradeepa, Rajendra (3)
Dankner, Rachel (3)
Milz, Mathias (3)
Wang, Qian (3)
Rahman, Mahmudur (3)
Linden, A (3)
visa färre...
Lärosäte
Uppsala universitet (5)
Göteborgs universitet (3)
Umeå universitet (3)
Lunds universitet (3)
Kungliga Tekniska Högskolan (2)
visa fler...
Chalmers tekniska högskola (2)
Stockholms universitet (1)
RISE (1)
Karolinska Institutet (1)
visa färre...
Språk
Engelska (30)
Svenska (1)
Tyska (1)
Kinesiska (1)
Forskningsämne (UKÄ/SCB)
Teknik (21)
Naturvetenskap (8)
Medicin och hälsovetenskap (4)
Samhällsvetenskap (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy