| 1. |
- Fenstermacher, M.E., et al.
(author)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Journal article (peer-reviewed)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
- Shi, Furong, et al.
(author)
-
A Nitroxide Radical Conjugated Polymer as an Additive to Reduce Nonradiative Energy Loss in Organic Solar Cells
- 2023
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:23
-
Journal article (peer-reviewed)abstract
- Nonfullerene-acceptor-based organic solar cells (NFA-OSCs) are now set off to the 20% power conversion efficiency milestone. To achieve this, minimizing all loss channels, including nonradiative photovoltage losses, seems a necessity. Nonradiative recombination, to a great extent, is known to be an inherent material property due to vibrationally induced decay of charge-transfer (CT) states or their back electron transfer to the triplet excitons. Herein, it is shown that the use of a new conjugated nitroxide radical polymer with 2,2,6,6-tetramethyl piperidine-1-oxyl side groups (GDTA) as an additive results in an improvement of the photovoltaic performance of NFA-OSCs based on different active layer materials. Upon the addition of GDTA, the open-circuit voltage (VOC), fill factor (FF), and short-circuit current density (JSC) improve simultaneously. This approach is applied to several material systems including state-of-the-art donor/acceptor pairs showing improvement from 15.8% to 17.6% (in the case of PM6:Y6) and from 17.5% to 18.3% (for PM6:BTP-eC9). Then, the possible reasons behind the observed improvements are discussed. The results point toward the suppression of the CT state to triplet excitons loss channel. This work presents a facile, promising, and generic approach to further improve the performance of NFA-OSCs.
|
|
| 3. |
- Song, Yuxin, 1981, et al.
(author)
-
Growth of GaSb1-xBix by molecular beam epitaxy
- 2012
-
In: Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures. - : American Vacuum Society. - 2166-2754 .- 2166-2746. ; 30:2, s. 02B114-
-
Journal article (peer-reviewed)abstract
- Molecular beam epitaxy for GaSb1-xBix is investigated in this article. The growth window for incorporation of Bi in GaSb was found. Strategies of avoiding formation of Bi droplets and enhancing Bi incorporation were studied. The Bi incorporation was confirmed by SIMS and RBS measurements. The Bi concentration in the samples was found to increase with increasing growth temperature and Bi flux. The position of GaSb1-xBix layer peak in XRD rocking curves is found to be correlated to Bi composition. Surface and structural properties of the samples were also investigated. Samples grown on GaSb and GaAs substrates were compared and no apparent difference for Bi incorporation was found.
|
|
| 4. |
- Tang, Shi, et al.
(author)
-
On the Design of Host-Guest Light-Emitting Electrochemical Cells : Should the Guest be Physically Blended or Chemically Incorporated into the Host for Efficient Emission?
- 2019
-
In: Advanced Optical Materials. - : Wiley-VCH Verlagsgesellschaft. - 2162-7568 .- 2195-1071. ; 7:18
-
Journal article (peer-reviewed)abstract
- It has recently been demonstrated that light-emitting electrochemical cells (LECs) can be designed to deliver strong emission with high efficiency when the charge transport is effectuated by a majority host and the emission is executed by a minority guest. A relevant question is then: should the guest be physically blended with or chemically incorporated into the host? A systematic study is presented that establishes that for near-infrared-(NIR-) emitting LECs based on poly(indacenodithieno[3,2-b]thiophene) (PIDTT) as the host and 4,7-bis(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b ']dithiophen-2-yl)benzo[c][1,2,5]-thiadiazole (SBS) as the guest the chemical-incorporation approach is preferable. The host-to-guest energy transfer in LEC devices is highly efficient at a low guest concentration of 0.5%, whereas guest aggregation and ion redistribution during device operation severly inhibits this transfer in the physical-blend devices. The chemical-incorporation approach also results in a redshifted emission with a somewhat lowered photoluminescence quantum yield, but the LEC performance is nevertheless very good. Specifically, an NIR-LEC device comprising a guest-dilute (0.5 molar%) PIDTT-SBS copolymer delivers highly stabile operation at a high radiance of 263 mu W cm(-2) (peak wavelength = 725 nm) and with an external quantum efficiency of 0.214%, which is close to the theoretical limit for this particular emitter and device geometry.
|
|
| 5. |
- Mone, Mariza, 1992, et al.
(author)
-
Star-Shaped Diketopyrrolopyrrole-Zinc Porphyrin that Delivers 900 nm Emission in Light-Emitting Electrochemical Cells
- 2019
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 31:23, s. 9721-9728
-
Journal article (peer-reviewed)abstract
- The development and application of a deep near-infrared (NIR) emitting star-shaped diketopyrrolopyrrole–Zn-porphyrin compound, ZnP(TDPP)4, is reported. The structure, conjugation, and planarity of the porphyrin compound were carefully tuned by molecular design, which resulted in a low-energy photoluminescence peak at 872 nm. The ZnP(TDPP)4 compound was employed as the emissive guest in light-emitting electrochemical cells (LECs), which also comprised the conjugated polymer poly[1,3-bis(2-ethylhexyl)-5-(5-(6-methyl-4,8-bis(5-(tributylsilyl)thiophen-2-yl)benzo[1,2-b:4,5-b′]dithiophen-2-yl)thiophen-2-yl)-7-(5-methylthiophen-2-yl)-4H,8H-benzo[1,2-c:4,5-c′]dithiophene-4,8-dione] (PBDTSi-BDD) as the majority host, an ionic liquid as the electrolyte, and two air-stabile electrodes. These systematically optimized host–guest LECs featured a peak electroluminescence at 900 nm, which was delivered at a significant radiance of 36 μW/cm2 and at a low drive voltage of 3.8 V. It is notable that this is the most redshifted NIR emission attained from an LEC device to date, and as such, this work introduces Zn porphyrins as a sustainable and tunable option for emerging emissive NIR applications.
|
|
| 6. |
- Dang, D. F., et al.
(author)
-
Manipulating backbone structure with various conjugated spacers to enhance photovoltaic performance of D-A-type two-dimensional copolymerse
- 2014
-
In: Organic Electronics: physics, materials, applications. - : Elsevier BV. - 1566-1199. ; 15:11, s. 2876-2884
-
Journal article (peer-reviewed)abstract
- A class of low band-gap two-dimensional conjugated polymers of PBDTT-FQ PBDTT-TQ PBDTT-BTQ and PBDTT-TTQ was designed and synthesized, which contains the same di(alkylthiophene)-substituted benzo[1,2-b:4,5-b']dithiophene (BDTT) and 6,7-difluoro-quinoxaline (Q) units, as well as various conjugated spacers of furan, thiophene, bithiophene and thieno[3,2-b]thiophene in the main chain. Significant effect of the varied spacers between the BDTT and Q units on the thermal, optical, electrochemical and photovoltaic properties was investigated and observed for these two-dimensional copolymers in the polymer solar cells. The maximum power conversion efficiency of 5.9% with a short circuit current of 13.7 mA/cm(2) and a fill factor of 0.56 was obtained for the PBDTT-TQ with thiophene spacer in the bulk hetero-junction PSCs using [6,6]-phenyl-C-71-butyric acid methyl ester as acceptor.
|
|
| 7. |
- Mone, Mariza, 1992, et al.
(author)
-
Near-Infrared Emission by Tuned Aggregation of a Porphyrin Compound in a Host–Guest Light-Emitting Electrochemical Cell
- 2021
-
In: Advanced Optical Materials. - : Wiley. - 2195-1071 .- 2162-7568. ; 9:6
-
Journal article (peer-reviewed)abstract
- The synthesis of 5,10,15,20-tetrakis((5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3′,2′-h][1,5]naphthyridin-2-yl)ethynyl)porphyrin zinc(II) (Por4NT), a near-infrared (NIR) emitting compound, comprising a zinc porphyrin core linked with triple bonds through its meso positions to four 5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3′,2′-h][1,5]naphthyridine (NT) arms is reported. Por4NT featured high solubility in common non-polar solvents, which is ideal for easy processing through solution techniques, and high photoluminescence (PL) efficiency of ≈30% in dilute toluene solution. It also exhibited a strong tendency for aggregation because of its flat conformation, and this aggregation resulted in a strong redshifted emission and a drop in PL efficiency. A well-matched PBDTSi-BDD-Py “host” terpolymer is therefore designed, which is capable of mitigating the aggregation of the Por4NT “guest”. An optimized blend of the host, guest, and an ionic-liquid electrolyte is utilized as the active material in a light-emitting electrochemical cell (LEC), which delivered strong NIR radiance of 134 µW cm-2 with a long wavelength maximum at 810 nm at a low drive voltage of 5.0 V. The attainment of the strong NIR emission from the host–guest LEC is attributed to a tuned aggregation of the Por4NT emitter, which resulted in the desired aggregation-induced redshift of the emission at a reasonably retained efficiency.
|
|
| 8. |
- Zhang, Yueping, et al.
(author)
-
A gRNA-tRNA array for CRISPR-Cas9 based rapid multiplexed genome editing in Saccharomyces cerevisiae
- 2019
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 10:1
-
Journal article (peer-reviewed)abstract
- With rapid progress in DNA synthesis and sequencing, strain engineering starts to be the rate-limiting step in synthetic biology. Here, we report a gRNA-tRNA array for CRISPR-Cas9 (GTR-CRISPR) for multiplexed engineering of Saccharomyces cerevisiae. Using reported gRNAs shown to be effective, this system enables simultaneous disruption of 8 genes with 87% efficiency. We further report an accelerated Lightning GTR-CRISPR that avoids the cloning step in Escherichia coli by directly transforming the Golden Gate reaction mix to yeast. This approach enables disruption of 6 genes in 3 days with 60% efficiency using reported gRNAs and 23% using un-optimized gRNAs. Moreover, we applied the Lightning GTR-CRISPR to simplify yeast lipid networks, resulting in a 30-fold increase in free fatty acid production in 10 days using just two-round deletions of eight previously identified genes. The GTR-CRISPR should be an invaluable addition to the toolbox of synthetic biology and automation.
|
|
| 9. |
- Tang, Shi, et al.
(author)
-
Intense and Stable Near-Infrared Emission from Light-Emitting Electrochemical Cells Comprising a Metal-Free Indacenodithieno[3,2-b]thiophene-Based Copolymer as the Single Emitter
- 2017
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 29:18, s. 7750-7759
-
Journal article (peer-reviewed)abstract
- We report on the synthesis, characterization, and application of a series of metal-free near-infrared (NIR) emitting alternating donor/acceptor copolymers based on indacenodithieno[3,2-b]thiophene (IDTT) as the donor unit. A light-emitting electrochemical cell (LEC), comprising a blend of the copolymer poly[indacenodithieno[3,2-b]thiophene-2,8-diyl-alt-2,3-diphenyl-5,8-di(thiophen-2-y1)- quinoxaline-5,5'-diy1] and an ionic liquid as the single-layer active material sandwiched between two air-stable electrodes, delivered NIR emission (lambda(peak) = 705 nm) with a high radiance of 129 mu W/cm(2) when driven by a low voltage of 3.4 V. The NIR-LEC also featured good stress stability, as manifested in that the peak NIR output from a nonencapsulated device after 24 h of continuous operation only had dropped by 3% under N-2 atmosphere and by 27% under ambient air. This work accordingly introduces IDTT-based donor/acceptor copolymers as functional metal-free electroluminescent materials in NIR-emitting devices and also provides guidelines for how future NIR emitters should be designed for further improved performance.
|
|
| 10. |
- Yang, Minmin, et al.
(author)
-
Advances in understanding of health-promoting benefits of medicine and food homology using analysis of gut microbiota and metabolomics
- 2020
-
In: Food Frontiers. - : Wiley. - 2643-8429. ; 1:4, s. 398-419
-
Research review (peer-reviewed)abstract
- The health-promoting benefits of medicine and food homology (MFH) are known for thousands of years in China. However, active compounds and biological mechanisms are unclear, greatly limiting clinical practice of MFH. The advent of gut microbiota analysis and metabolomics emerge as key tools to discover functional compounds, therapeutic targets, and mechanisms of benefits of MFH. Such studies hold great promise to promote and optimize functional efficacy and development of MFH-based products, for example, foods for daily dietary supplements or for special medical purposes. In this review, we summarized pharmacological effects of 109 species of MFH approved by the Health and Fitness Commission in 2015. Recent studies applying genome sequencing of gut microbiota and metabolomics to explain the activity of MFH in prevention and management of health consequences were extensively reviewed. We discussed the potentiality in future to decipher functional activities of MFH by applying metabolomics-based polypharmacokinetic strategy and multiomics technologies. The needs for personalized MFH recommendations and comprehensive databases have also been highlighted. This review emphasizes current achievements and challenges of the analysis of gut microbiota and metabolomics as a new avenue to understand MFH.
|
|
