| 1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
- You, Xiaohu, et al.
(författare)
-
Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts
- 2021
-
Ingår i: Science China Information Sciences. - : Science Press. - 1674-733X .- 1869-1919. ; 64:1
-
Forskningsöversikt (refereegranskat)abstract
- The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.
|
|
| 3. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
Ingår i: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 4. |
- Ding, Sunjia, et al.
(författare)
-
Boosting enzymatic degradation of cellulose using a fungal expansin : Structural insight into the pretreatment mechanism
- 2022
-
Ingår i: Bioresource Technology. - : Elsevier. - 0960-8524 .- 1873-2976. ; 358
-
Tidskriftsartikel (refereegranskat)abstract
- The recalcitrance of cellulosic biomass greatly hinders its enzymatic degradation. Expansins induce cell wall loosening and promote efficient cellulose utilization; however, the molecular mechanism underlying their action is not well understood. In this study, TlEXLX1, a fungal expansin from Talaromyces leycettanus JCM12802, was characterized in terms of phylogeny, synergy, structure, and mechanism of action. TlEXLX1 displayed varying degrees of synergism with commercial cellulase in the pretreatment of corn straw and filter paper. TlEXLX1 binds to cellulose via domain 2, mediated by CH–π interactions with residues Tyr291, Trp292, and Tyr327. Residues Asp237, Glu238, and Asp248 in domain 1 form hydrogen bonds with glucose units and break the inherent hydrogen bonding within the cellulose matrix. This study identified the expansin amino acid residues crucial for cellulose binding, and elucidated the structure and function of expansins in cell wall networks; this has potential applications in biomass utilization.
|
|
| 5. |
- Liu, Xiaoqing, et al.
(författare)
-
Exploring the cellulolytic and hemicellulolytic activities of manganese peroxidase for lignocellulose deconstruction
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundA cost-effective pretreatment and saccharification process is a necessary prerequisite for utilizing lignocellulosic biomass (LCB) in biofuel and biomaterials production. Utilizing a multifunctional enzyme with both pretreatment and saccharification functions in a single step for simultaneous biological pretreatment and saccharification process (SPS) will be a green method of low cost and high efficiency. Manganese peroxidase (MnP, EC 1.11.1.13), a well-known lignin-degrading peroxidase, is generally preferred for the biological pretreatment of biomass. However, exploring the role and performance of MnP in LCB conversion will promote the application of MnP for lignocellulose-based biorefineries.ResultsIn this study, we explored the ability of an MnP from Moniliophthora roreri, MrMnP, in LCB degradation. With Mn2+ and H2O2, MrMnP decomposed 5.0 g/L carboxymethyl cellulose to 0.14 mM of reducing sugar with a conversion yield of 5.0 mg/g, including 40 μM cellobiose, 70 μM cellotriose, 20 μM cellotetraose, and 10 μM cellohexaose, and degraded 1.0 g/L mannohexaose to 0.33 μM mannose, 4.08 μM mannotriose, and 4.35 μM mannopentaose. Meanwhile, MrMnP decomposed 5.0 g/L lichenan to 0.85 mM of reducing sugar with a conversion yield of 30.6 mg/g, including 10 μM cellotriose, 20 μM cellotetraose, and 80 μM cellohexose independently of Mn2+ and H2O2. Moreover, the versatility of MrMnP in LCB deconstruction was further verified by decomposing locust bean gum and wheat bran into reducing sugars with a conversion yield of 54.4 mg/g and 29.5 mg/g, respectively, including oligosaccharides such as di- and tri-saccharides. The catalytic mechanism underlying MrMnP degraded lignocellulose was proposed as that with H2O2, MrMnP oxidizes Mn2+ to Mn3+. Subsequently, it forms a complex with malonate, facilitating the degradation of CMC and mannohexaose into reducing sugars. Without H2O2, MrMnP directly oxidizes malonate to hydroperoxyl acetic acid radical to form compound I, which then attacks the glucosidic bond of lichenan.ConclusionThis study identified a new function of MrMnP in the hydrolysis of cellulose and hemicellulose, suggesting that MrMnP exhibits its versatility in the pretreatment and saccharification of LCB. The results will lead to an in-depth understanding of biocatalytic saccharification and contribute to forming new enzymatic systems for using lignocellulose resources to produce sustainable and economically viable products and the long-term development of biorefinery, thereby increasing the productivity of LCB as a green resource.
|
|
| 6. |
- Shi, Furong, et al.
(författare)
-
A Nitroxide Radical Conjugated Polymer as an Additive to Reduce Nonradiative Energy Loss in Organic Solar Cells
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:23
-
Tidskriftsartikel (refereegranskat)abstract
- Nonfullerene-acceptor-based organic solar cells (NFA-OSCs) are now set off to the 20% power conversion efficiency milestone. To achieve this, minimizing all loss channels, including nonradiative photovoltage losses, seems a necessity. Nonradiative recombination, to a great extent, is known to be an inherent material property due to vibrationally induced decay of charge-transfer (CT) states or their back electron transfer to the triplet excitons. Herein, it is shown that the use of a new conjugated nitroxide radical polymer with 2,2,6,6-tetramethyl piperidine-1-oxyl side groups (GDTA) as an additive results in an improvement of the photovoltaic performance of NFA-OSCs based on different active layer materials. Upon the addition of GDTA, the open-circuit voltage (VOC), fill factor (FF), and short-circuit current density (JSC) improve simultaneously. This approach is applied to several material systems including state-of-the-art donor/acceptor pairs showing improvement from 15.8% to 17.6% (in the case of PM6:Y6) and from 17.5% to 18.3% (for PM6:BTP-eC9). Then, the possible reasons behind the observed improvements are discussed. The results point toward the suppression of the CT state to triplet excitons loss channel. This work presents a facile, promising, and generic approach to further improve the performance of NFA-OSCs.
|
|
| 7. |
- Wang, Baicun, et al.
(författare)
-
Human-centric smart manufacturing
- 2023
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 69, s. 18-19
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 8. |
- Wang, Ji, et al.
(författare)
-
Microstructural evolution of epitaxial Ti3AlC2 film on sapphire under ion irradiation and nanoindentation-induced deformation
- 2018
-
Ingår i: Journal of Nuclear Materials. - : ELSEVIER SCIENCE BV. - 0022-3115 .- 1873-4820. ; 509, s. 181-187
-
Tidskriftsartikel (refereegranskat)abstract
- Feasibility of Ti3AlC2 phase as the protective coatings of accident tolerant fuels (ATFs) was investigated by means of ions irradiation, nanoindentation and transmission electron microscopy. Au ions irradiation was carried out on thin Ti3AlC2 film to simulate the high displacement damage induced by the energetic particles in the nuclear reactors. Nanoindentation on the Ti3AlC2 film was followed subsequently as a source of external stress to simulate the high pressure applied on the cladding in nuclear reactor cores of pressurized water reactors (PWRs). TEM was used to characterize the microstructural evolution of Ti3AlC2 film after irradiation and nanoindentation. TEM analysis shows that Ti3AlC2 film remains pristine layered structure and no amorphization was detected after irradiation to similar to 14 dpa. The combined nanoindentation and TEM show that no rupture and exfoliation of the Au-irradiated Ti3AlC2 film occur even the extern stress and total elongation induced by nanoindentation reach to 16.6 GPa and similar to 5%, respectively. The above results show good irradiation resistance and good ductility as well as excellent adhesion of the Ti3AlC2 coating on the substrate after high dose irradiation and under high external stress. This indicates the good feasibility of Ti3AlC2 thin films as the coatings of ATF claddings. (C) 2018 Elsevier B.V. All rights reserved.
|
|
| 9. |
- Wang, Wenxiao, et al.
(författare)
-
Nonlinear associations of the built environment with cycling frequency among older adults in Zhongshan, China
- 2021
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI AG. - 1661-7827 .- 1660-4601. ; 18:20
-
Tidskriftsartikel (refereegranskat)abstract
- The health and welfare of older adults have raised increasing attention due to global aging. Cycling is a physical activity and mode of transportation to enhance the mobility and quality of life among older adults. Nevertheless, the planning strategies to promote cycling among older adults are underutilized. Therefore, this paper describes the nonlinear associations of the built environment with cycling frequency among older adults. The data were collected from the Zhongshan Household Travel Survey (ZHTS) in 2012. The modeling approach was the eXtreme Gradient Boosting (XGBoost) model. The findings demonstrated that nonlinear relationships exist among all the selected built environment attributes. Within specific intervals, the population density, the land-use mixture, the distance from home to the nearest bus stop, and the distance from home to CBD are positively correlated to the cycling among older adults. Additionally, an inverse “U”-shaped relationship appears in the percentage of green space land use among all land uses. Moreover, the intersection density is inversely related to the cycling frequency among older adults. These findings provide nuanced and appropriate guidance for establishing age-friendly neighborhoods.
|
|
| 10. |
- Wang, Zhihang, 1989, et al.
(författare)
-
Chip-scale solar thermal electrical power generation
- 2022
-
Ingår i: Cell Reports Physical Science. - : Elsevier BV. - 2666-3864. ; 3:3
-
Tidskriftsartikel (refereegranskat)abstract
- There is an urgent need for alternative compact technologies that can derive and store energy from the sun, especially the large amount of solar heat that is not effectively used for power generation. Here, we report a combination of solution- and neat-film-based molecular solar thermal (MOST) systems, where solar energy can be stored as chemical energy and released as heat, with microfabricated thermoelectric generators to produce electricity when solar radiation is not available. The photophysical properties of two MOST couples are characterized both in liquid with a catalytical cycling setup and in a phase-interconvertible neat film. Their suitable photophysical properties let us combine them individually with a microelectromechanical ultrathin thermoelectric chip to use the stored solar energy for electrical power generation. The generator can produce, as a proof of concept, a power output of up to 0.1 nW (power output per unit volume up to 1.3 W m−3). Our results demonstrate that such a molecular thermal power generation system has a high potential to store and transfer solar power into electricity and is thus potentially independent of geographical restrictions.
|
|
