| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
- Wang, Baicun, et al.
(författare)
-
Human-centric smart manufacturing
- 2023
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 69, s. 18-19
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 4. |
- Cao, Lina, et al.
(författare)
-
Atomically dispersed iron hydroxide anchored on Pt for preferential oxidation of CO in H-2
- 2019
-
Ingår i: Nature. - : NATURE PUBLISHING GROUP. - 0028-0836 .- 1476-4687. ; 565:7741, s. 631-635
-
Tidskriftsartikel (refereegranskat)abstract
- Proton-exchange-membrane fuel cells (PEMFCs) are attractive next-generation power sources for use in vehicles and other applications(1), with development efforts focusing on improving the catalyst system of the fuel cell. One problem is catalyst poisoning by impurity gases such as carbon monoxide (CO), which typically comprises about one per cent of hydrogen fuel(2-4). A possible solution is on-board hydrogen purification, which involves preferential oxidation of CO in hydrogen (PROX)(3-7). However, this approach is challenging(8-15) because the catalyst needs to be active and selective towards CO oxidation over a broad range of low temperatures so that CO is efficiently removed (to below 50 parts per million) during continuous PEMFC operation (at about 353 kelvin) and, in the case of automotive fuel cells, during frequent cold-start periods. Here we show that atomically dispersed iron hydroxide, selectively deposited on silica-supported platinum (Pt) nanoparticles, enables complete and 100 per cent selective CO removal through the PROX reaction over the broad temperature range of 198 to 380 kelvin. We find that the mass-specific activity of this system is about 30 times higher than that of more conventional catalysts consisting of Pt on iron oxide supports. In situ X-ray absorption fine-structure measurements reveal that most of the iron hydroxide exists as Fe-1(OH)(x) clusters anchored on the Pt nanoparticles, with density functional theory calculations indicating that Fe-1(OH)(x)-Pt single interfacial sites can readily react with CO and facilitate oxygen activation. These findings suggest that in addition to strategies that target oxide-supported precious-metal nanoparticles or isolated metal atoms, the deposition of isolated transition-metal complexes offers new ways of designing highly active metal catalysts.
|
|
| 5. |
- Jinzhi, Lu, 1988-, et al.
(författare)
-
A Domain-specific Modeling Approach Supporting Tool-chain Development with Bayesian Network Models
- 2019
-
Ingår i: Integrated Computer-Aided Engineering. - : IOS Press. - 1069-2509 .- 1875-8835. ; 27:2, s. 153-171
-
Tidskriftsartikel (refereegranskat)abstract
- Constructing and evaluating a comprehensive tool-chain with commercial off-the-shelf and proprietary tools for the deployment of model-based systems engineering (MBSE) is a challenging and complex task. Specifically, the lack of early assessment during tool-chain development has led to increased research and development costs when unexpected features are developed or poor decisions are made. In this paper, a domain-specific modeling (DSM) approach is proposed to support decision-makings during tool-chain design and to facilitate quantitative assessment of tool-chain features at early-phases. Using this approach, different views of tool-chains are first formalized under a DSM framework. Then the DSM models are transformed to Bayesian network models for supporting the quantitative assessment of related tools in order to analyze the whole tool-chains’ features. In the case study, the approach is verified by comparing two MBSE tool-chains for an auto-braking system design. The results indicate that the DSM approach enhances the understanding of tool-chain concepts, promotes the efficiency of MBSE tool-chain development, and verifies the tool-chain in early development phases using a quantitative approach.
|
|
| 6. |
|
|
| 7. |
- Ren, Lei, et al.
(författare)
-
LM-CNN : A Cloud-Edge Collaborative Method for Adaptive Fault Diagnosis With Label Sampling Space Enlarging
- 2022
-
Ingår i: IEEE Transactions on Industrial Informatics. - : Institute of Electrical and Electronics Engineers (IEEE). - 1551-3203 .- 1941-0050. ; 18:12, s. 9057-9067
-
Tidskriftsartikel (refereegranskat)abstract
- In cloud manufacturing systems, fault diagnosis is essential for ensuring stable manufacturing processes. The most crucial performance indicators of fault diagnosis models are generalization and accuracy. An urgent problem is the lack and imbalance of fault data. To address this issue, in this article, most of existing approaches demand the label of faults as a priori knowledge and require extensive target fault data. These approaches may also ignore the heterogeneity of various equipment. We propose a cloud-edge collaborative method for adaptive fault diagnosis with label sampling space enlarging, named label-split multiple-inputs convolutional neural network, in cloud manufacturing. First, a multiattribute cooperative representation-based fault label sampling space enlarging approach is proposed to extend the variety of diagnosable faults. Besides, a multi-input multi-output data augmentation method with label-coupling weighted sampling is developed. In addition, a cloud-edge collaborative adaptation approach for fault diagnosis for scene-specific equipment in cloud manufacturing system is proposed. Experiments demonstrate the effectiveness and accuracy of our method.
|
|
| 8. |
- Tian, Yu-Peng, et al.
(författare)
-
Investigations and facile synthesis of a series of novel multi-functional two-photon absorption materials
- 2007
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 0959-9428 .- 1364-5501. ; 17:34, s. 3646-3654
-
Tidskriftsartikel (refereegranskat)abstract
- Six centrosymmetric D-(pi-A)(3) structural triphenylamine derivatives that can be used as two- photon photopolymerization and optical data storage chromophores, tris[ 4-( 4- pyridylethenyl) phenyl] amine ( 1), tris[ 4-( 2- pyridylethenyl) phenyl] amine ( 2), tris( 4- cyanoethenylphenyl) amine ( 3), tris[ 4- butylacrylatephenyl] amine ( 4), tris[ 4- methylacrylatephenyl] amine ( 5) and tris[ 4- acrylicethenylphenyl] amine ( 6), have been successfully synthesized via a triple palladium-catalyzed Heck coupling reaction, and the novel chromophores were fully characterized by elemental analysis, IR, (1)H-NMR and ESIMS. The structure for 3 was determined by single crystal X-ray diffraction study. One- and two-photon absorption and fluorescence in various solvents were experimentally investigated. Two-photon initiated polymerization microfabrication and optical data recording experiments were carried out under 780 nm laser radiation, and the possible polymerization mechanism is discussed based on theoretical calculations. All the six chromophores have relatively large two-photon absorption crosssections, and exhibit optical memory and highly efficient two-photon initiated polymerization abilities.
|
|
| 9. |
- Wang, Guangwei, et al.
(författare)
-
Preparation of Biomass Hydrochar and Application Analysis of Blast Furnace Injection
- 2023
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrothermal carbonization (HTC) technology was used to carbonize and improve biomass raw material to obtain hydrochar. The effects of HTC temperature and holding time on the yield, composition, structure, combustion behavior, and safety of hydrochar were studied systematically. In addition, the results show that with the increase in HTC temperature and the prolongation of holding time, the yield of hydrochar gradually reduces, the fixed carbon content of hydrochar increases, the volatile content decreases, and a large number of ash and alkali metals enter the liquid phase and are removed. Further, the analysis of the combustion properties and the structure of hydrochar can be observed in that, as the HTC process promotes the occurrence of polymerization reactions, the specific surface area gradually reduces, the degree of carbon ordering increases, and the combustion curve moves toward the high-temperature zone and gradually approaches bituminous coal. Since biomass hydrochar has the characteristic of being carbon neutral, blast furnace injection hydrochar can reduce CO2 emissions, and every 1 kg/tHM of biomass hydrochar can reduce CO2 emissions by 1.95 kg/tHM.
|
|
| 10. |
- Wang, Guilei, et al.
(författare)
-
Study of SiGe selective epitaxial process integration with high-k and metal gate for 16/14 nm nodes FinFET technology
- 2016
-
Ingår i: Microelectronic Engineering. - : Elsevier. - 0167-9317 .- 1873-5568. ; 163, s. 49-54
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the process integration of SiGe selective epitaxy on source/drain regions, for 16/14 nm nodes FinFET with high-k & metal gate has been presented. Selectively grown Si1-xGex (0.35 <= x <= 0.40) with boron concentration of 1 x 10(20) cm(-3) was used to elevate the source/drain of the transistors. The epi-quality, layer profile and strain amount of the selectively grown SiGe layers were also investigated by means of various characterizations. A series of prebaking experiments were performed for temperatures ranging from 740 to 825 degrees C in order to in situ clean the Si fins prior to the epitaxy. The results showed that the thermal budget needs to be limited to 780-800 degrees C in order to avoid any damages to the shape of Si fins but to remove the native oxide effectively which is essential for high epitaxial quality. The Ge content in SiGe layers on Si fins was determined from the strain measured directly by reciprocal space mappings using synchrotron radiation. Atomic layer deposition technique was applied to fill the gate trench with W using WF6 and B2H6 precursors. By such an AID approach, decent growth rate, low resistivity and excellent gap filling capability of W in pretty high aspect-ratio gate trench was realized. The as-fabricated FinFETs demonstrated decent electrical characteristics.
|
|
