| 1. |
- Akkoyun, S., et al.
(författare)
-
AGATA - Advanced GAmma Tracking Array
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002 .- 0167-5087 .- 1872-9576. ; 668, s. 26-58
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation γ-ray spectrometer. AGATA is based on the technique of γ-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a γ ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realisation of γ-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterisation of the crystals was measured and compared with detector- response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximise its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. © 2011 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Beale, S. B., et al.
(författare)
-
Combined two-phase co-flow and counter-flow in a gas channel/porous transport layer assembly
- 2020. - 9
-
Ingår i: PRiME 2020 : Polymer Electrolyte Fuel Cells and Electrolyzers 20 (PEFC and E 20) - Polymer Electrolyte Fuel Cells and Electrolyzers 20 (PEFC and E 20). - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607685395 ; 98:9, s. 305-315
-
Konferensbidrag (refereegranskat)abstract
- This paper considers a detailed numerical analysis of combined liquid-gas co-flow in a gas channel, with liquid-gas counter-flow in a porous transport layer, as is typically found on the cathode side of a polymer electrolyte fuel cell. The geometry is obtained by digital reconstruction of nano-computer tomography images. From this, the domain is tessellated with an unstructured castellated or octree mesh, upon which the equations of mass and momentum are solved by means of a volume of fluid method. Liquid water is produced from an electrode where gaseous oxygen is simultaneously consumed by electrochemical reduction; Liquid-gas counter flow in the porous transport layer results in liquid drops being entrained in co-flow in the gas channels and convected by the gas downstream.
|
|
| 3. |
- Rieth, M., et al.
(författare)
-
A brief summary of the progress on the EFDA tungsten materials program
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 442:1-3, s. S173-S180
-
Tidskriftsartikel (refereegranskat)abstract
- The long-term objective of the European Fusion Development Agreement (EFDA) fusion materials programme is to develop structural and armor materials in combination with the necessary production and fabrication technologies for reactor concepts beyond the International Thermonuclear Experimental Reactor. The programmatic roadmap is structured into four engineering research lines which comprise fabrication process development, structural material development, armor material optimization, and irradiation performance testing, which are complemented by a fundamental research programme on "Materials Science and Modeling." This paper presents the current research status of the EFDA experimental and testing investigations, and gives a detailed overview of the latest results on materials research, fabrication, joining, high heat flux testing, plasticity studies, modeling, and validation experiments.
|
|
| 4. |
- Andersson, M., et al.
(författare)
-
Coupling of lattice boltzmann and volume of fluid approaches to study the droplet behavior at the gas diffusion layer/gas channel interface
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607688600 ; 86, s. 329-336
-
Konferensbidrag (refereegranskat)abstract
- A typical polymer electrolyte fuel cell (PEFC) flow field consists of micro/minichannels. The continues removal of liquid water from the cathode channels is a critical topic, as water droplets forming in the channels may block the transport of gaseous oxygen to the active sites, which not only gives an uneven current distribution and substantial loss of performance, but also, increases degradation rates and unstable operation. Water generated by the electrochemical reactions condenses, depending on temperature mainly, into liquid form, potentially flooding various part of the PEFC. The aim of this work is to obtain an increased understanding of the droplet behavior at the gas diffusion layer (GDL) interface with the gas channels in PEFCs by the coupling of Lattice Boltzmann (LB) and Volume of Fluid (VOF) approaches. A multiscale environment is established with input parameters in the VOF model being extracted from in-house LB calculations. It is clear that the contact angle as well as the size of the liquid droplet vary with positions at the GDL surface, depending on the stochastic GDL geometry. A VOF model describing one straight channel with one gas inlet, one liquid inlet (at the GDL surface) and one two-phase outlet is employed.
|
|
| 5. |
- Beale, Steven B., et al.
(författare)
-
Continuum scale modelling and complementary experimentation of solid oxide cells
- 2021
-
Ingår i: Progress in Energy and Combustion Science. - : Elsevier BV. - 0360-1285. ; 85
-
Forskningsöversikt (refereegranskat)abstract
- Solid oxide cells are an exciting technology for energy conversion. Fuel cells, based on solid oxide technology, convert hydrogen or hydrogen-rich fuels into electrical energy, with potential applications in stationary power generation. Conversely, solid oxide electrolysers convert electricity into chemical energy, thereby offering the potential to store energy from transient resources, such as wind turbines and other renewable technologies. For solid oxide cells to displace conventional energy conversion devices in the marketplace, reliability must be improved, product lifecycles extended, and unit costs reduced. Mathematical models can provide qualitative and quantitative insight into physical phenomena and performance, over a range of length and time scales. The purpose of this paper is to provide the reader with a summary of the state-of-the art of solid oxide cell models. These range from: simple methods based on lumped parameters with little or no kinetics to detailed, time-dependent, three-dimensional solutions for electric field potentials, complex chemical kinetics and fully-comprehensive equations of motion based on effective transport properties. Many mathematical models have, in the past, been based on inaccurate property values obtained from the literature, as well as over-simplistic schemes to compute effective values. It is important to be aware of the underlying experimental methods available to parameterise mathematical models, as well as validate results. In this article, state-of-the-art techniques for measuring kinetic, electric and transport properties are also described. Methods such as electrochemical impedance spectroscopy allow for fundamental physicochemical parameters to be obtained. In addition, effective properties may be obtained using micro-scale computer simulations based on digital reconstruction obtained from X-ray tomography/focussed ion beam scanning electron microscopy, as well as percolation theory. The cornerstone of model validation, namely the polarisation or current-voltage diagram, provides necessary, but insufficient information to substantiate the reliability of detailed model calculations. The results of physical experiments which precisely mimic the details of model conditions are scarce, and it is fair to say there is a gap between the two activities. The purpose of this review is to introduce the reader to the current state-of-the art of solid oxide analysis techniques, in a tutorial fashion, not only numerical and but also experimental, and to emphasise the cross-linkages between techniques.
|
|
| 6. |
- Guthrie, M., et al.
(författare)
-
Thermal expansion in UO2 determined by high-energy X-ray diffraction
- 2016
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115. ; 479, s. 19-22
-
Tidskriftsartikel (refereegranskat)abstract
- Here we present crystallographic analyses of high-energy X-ray diffraction data on polycrystalline UO2 up to the melting temperature. The Rietveld refinements of our X-ray data are in agreement with previous measurements, but are systematically located around the upper bound of their uncertainty, indicating a slightly steeper trend of thermal expansion compared to established values. This observation is consistent with recent first principles calculations.
|
|
| 7. |
- Zhang, Shidong, et al.
(författare)
-
Simple and complex polymer electrolyte fuel cell stack models : A comparison
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607685395 ; 86, s. 287-300
-
Konferensbidrag (refereegranskat)abstract
- In this paper, two distinct polymer electrolyte fuel cell stack models are constructed: a detailed numerical model (DNM) employing a fine-scale computational mesh and a coarse-mesh approach based on a distributed resistance analogy (DRA) where diffusion terms in the transport equations are replaced by rate terms. Both methods are applied to a 5-cell, high-temperature polymer electrolyte fuel cell stack with an active area of 200 cm2 per cell. The polarization curve and local current density distributions from both the DRA and DNM are compared with experimental data, finding good agreement. Temperature, pressure, Nernst potential, and species distributions are also exhibited. The DNM displays details of fine-scale local extrema not captured by the DRA; however, the latter requires orders of magnitude less computer processor power and memory for execution. Both methods provide much finer-scale results than present experimental techniques.
|
|
| 8. |
- Sudireddy, B. R., et al.
(författare)
-
Development of Robust Metal-Supported SOFCs and Stack Components in EU METSAPP Consortium
- 2017
-
Ingår i: Fuel Cells. - : Wiley. - 1615-6846 .- 1615-6854. ; 17:4, s. 508-516
-
Tidskriftsartikel (refereegranskat)abstract
- The potential of MS-SOFCs was demonstrated through the previous EU METSOFC project, which concluded that the development of oxidation resistant novel metal-supported solid oxide fule cell (MS-SOFC) design and stack is the requirement to advance this technology to the next level. The following EU METSAPP project has been executed with an overall aim of developing advanced metal-supported cells and stacks based on a robust, reliable and up-scalable technology. During the project, oxidation resistant nanostructured anodes based on modified SrTiO3 were developed and integrated into MS-SOFCs to enhance their robustness. In addition, the manufacturing of metal-supported cells with different geometries, scalability of the manufacturing process was demonstrated and more than 200 cells with an area of approximate to 150 cm(2) were produced. The electrochemical performance of different cell generations was evaluated and best performance and stability combination was observed with doped SrTiO3 based anode designs. Furthermore, numerical models to understand the corrosion behavior of the MS-SOFCs were developed and validated. Finally, the cost effective concept of coated metal interconnects was developed, which resulted in 90% reduction in Cr evaporation, three times lower Cr2O3 scale thickness and increased lifetime. The possibility of assembling these cells into two radically different stack designs was demonstrated.
|
|
| 9. |
- Jimenez-del-Toro, Oscar, et al.
(författare)
-
Cloud-Based Evaluation of Anatomical Structure Segmentation and Landmark Detection Algorithms : VISCERAL Anatomy Benchmarks
- 2016
-
Ingår i: IEEE Transactions on Medical Imaging. - : Institute of Electrical and Electronics Engineers (IEEE). - 0278-0062 .- 1558-254X. ; 35:11, s. 2459-2475
-
Tidskriftsartikel (refereegranskat)abstract
- Variations in the shape and appearance of anatomical structures in medical images are often relevant radiological signs of disease. Automatic tools can help automate parts of this manual process. A cloud-based evaluation framework is presented in this paper including results of benchmarking current state-of-the-art medical imaging algorithms for anatomical structure segmentation and landmark detection: the VISCERAL Anatomy benchmarks. The algorithms are implemented in virtual machines in the cloud where participants can only access the training data and can be run privately by the benchmark administrators to objectively compare their performance in an unseen common test set. Overall, 120 computed tomography and magnetic resonance patient volumes were manually annotated to create a standard Gold Corpus containing a total of 1295 structures and 1760 landmarks. Ten participants contributed with automatic algorithms for the organ segmentation task, and three for the landmark localization task. Different algorithms obtained the best scores in the four available imaging modalities and for subsets of anatomical structures. The annotation framework, resulting data set, evaluation setup, results and performance analysis from the three VISCERAL Anatomy benchmarks are presented in this article. Both the VISCERAL data set and Silver Corpus generated with the fusion of the participant algorithms on a larger set of non-manually-annotated medical images are available to the research community.
|
|
| 10. |
|
|
