| 1. |
- Akkoyun, S., et al.
(författare)
-
AGATA - Advanced GAmma Tracking Array
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002 .- 0167-5087 .- 1872-9576. ; 668, s. 26-58
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation γ-ray spectrometer. AGATA is based on the technique of γ-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a γ ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realisation of γ-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterisation of the crystals was measured and compared with detector- response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximise its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. © 2011 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Rieth, M., et al.
(författare)
-
A brief summary of the progress on the EFDA tungsten materials program
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 442:1-3, s. S173-S180
-
Tidskriftsartikel (refereegranskat)abstract
- The long-term objective of the European Fusion Development Agreement (EFDA) fusion materials programme is to develop structural and armor materials in combination with the necessary production and fabrication technologies for reactor concepts beyond the International Thermonuclear Experimental Reactor. The programmatic roadmap is structured into four engineering research lines which comprise fabrication process development, structural material development, armor material optimization, and irradiation performance testing, which are complemented by a fundamental research programme on "Materials Science and Modeling." This paper presents the current research status of the EFDA experimental and testing investigations, and gives a detailed overview of the latest results on materials research, fabrication, joining, high heat flux testing, plasticity studies, modeling, and validation experiments.
|
|
| 3. |
- Zhang, Shidong, et al.
(författare)
-
Simple and complex polymer electrolyte fuel cell stack models : A comparison
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607685395 ; 86, s. 287-300
-
Konferensbidrag (refereegranskat)abstract
- In this paper, two distinct polymer electrolyte fuel cell stack models are constructed: a detailed numerical model (DNM) employing a fine-scale computational mesh and a coarse-mesh approach based on a distributed resistance analogy (DRA) where diffusion terms in the transport equations are replaced by rate terms. Both methods are applied to a 5-cell, high-temperature polymer electrolyte fuel cell stack with an active area of 200 cm2 per cell. The polarization curve and local current density distributions from both the DRA and DNM are compared with experimental data, finding good agreement. Temperature, pressure, Nernst potential, and species distributions are also exhibited. The DNM displays details of fine-scale local extrema not captured by the DRA; however, the latter requires orders of magnitude less computer processor power and memory for execution. Both methods provide much finer-scale results than present experimental techniques.
|
|
| 4. |
- Andersson, M., et al.
(författare)
-
Coupling of lattice boltzmann and volume of fluid approaches to study the droplet behavior at the gas diffusion layer/gas channel interface
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607688600 ; 86, s. 329-336
-
Konferensbidrag (refereegranskat)abstract
- A typical polymer electrolyte fuel cell (PEFC) flow field consists of micro/minichannels. The continues removal of liquid water from the cathode channels is a critical topic, as water droplets forming in the channels may block the transport of gaseous oxygen to the active sites, which not only gives an uneven current distribution and substantial loss of performance, but also, increases degradation rates and unstable operation. Water generated by the electrochemical reactions condenses, depending on temperature mainly, into liquid form, potentially flooding various part of the PEFC. The aim of this work is to obtain an increased understanding of the droplet behavior at the gas diffusion layer (GDL) interface with the gas channels in PEFCs by the coupling of Lattice Boltzmann (LB) and Volume of Fluid (VOF) approaches. A multiscale environment is established with input parameters in the VOF model being extracted from in-house LB calculations. It is clear that the contact angle as well as the size of the liquid droplet vary with positions at the GDL surface, depending on the stochastic GDL geometry. A VOF model describing one straight channel with one gas inlet, one liquid inlet (at the GDL surface) and one two-phase outlet is employed.
|
|
| 5. |
- Sudireddy, B. R., et al.
(författare)
-
Development of Robust Metal-Supported SOFCs and Stack Components in EU METSAPP Consortium
- 2017
-
Ingår i: Fuel Cells. - : Wiley. - 1615-6846 .- 1615-6854. ; 17:4, s. 508-516
-
Tidskriftsartikel (refereegranskat)abstract
- The potential of MS-SOFCs was demonstrated through the previous EU METSOFC project, which concluded that the development of oxidation resistant novel metal-supported solid oxide fule cell (MS-SOFC) design and stack is the requirement to advance this technology to the next level. The following EU METSAPP project has been executed with an overall aim of developing advanced metal-supported cells and stacks based on a robust, reliable and up-scalable technology. During the project, oxidation resistant nanostructured anodes based on modified SrTiO3 were developed and integrated into MS-SOFCs to enhance their robustness. In addition, the manufacturing of metal-supported cells with different geometries, scalability of the manufacturing process was demonstrated and more than 200 cells with an area of approximate to 150 cm(2) were produced. The electrochemical performance of different cell generations was evaluated and best performance and stability combination was observed with doped SrTiO3 based anode designs. Furthermore, numerical models to understand the corrosion behavior of the MS-SOFCs were developed and validated. Finally, the cost effective concept of coated metal interconnects was developed, which resulted in 90% reduction in Cr evaporation, three times lower Cr2O3 scale thickness and increased lifetime. The possibility of assembling these cells into two radically different stack designs was demonstrated.
|
|
| 6. |
- Hallstrom, J., et al.
(författare)
-
Performance of a modular wideband 1000 kV HVDC reference divider
- 2014
-
Ingår i: CPEM Digest (Conference on Precision Electromagnetic Measurements). - 9781479952052 ; , s. 782-783
-
Konferensbidrag (refereegranskat)abstract
- This paper describes the performance of a wideband HVDC reference divider. The divider concept is a shielded modular divider and it is intended for traceable calibration of HVDC measuring systems up to 1000 kV in customers' laboratories. The first priority in the design was the accuracy of HVDC measurements. In addition, the divider was designed to have wide bandwidth, both to enable measurement of ripple voltages and to prevent damage during possible flashovers. © 2014 IEEE.
|
|
| 7. |
- Beale, S. B., et al.
(författare)
-
Combined two-phase co-flow and counter-flow in a gas channel/porous transport layer assembly
- 2020. - 9
-
Ingår i: PRiME 2020 : Polymer Electrolyte Fuel Cells and Electrolyzers 20 (PEFC and E 20) - Polymer Electrolyte Fuel Cells and Electrolyzers 20 (PEFC and E 20). - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607685395 ; 98:9, s. 305-315
-
Konferensbidrag (refereegranskat)abstract
- This paper considers a detailed numerical analysis of combined liquid-gas co-flow in a gas channel, with liquid-gas counter-flow in a porous transport layer, as is typically found on the cathode side of a polymer electrolyte fuel cell. The geometry is obtained by digital reconstruction of nano-computer tomography images. From this, the domain is tessellated with an unstructured castellated or octree mesh, upon which the equations of mass and momentum are solved by means of a volume of fluid method. Liquid water is produced from an electrode where gaseous oxygen is simultaneously consumed by electrochemical reduction; Liquid-gas counter flow in the porous transport layer results in liquid drops being entrained in co-flow in the gas channels and convected by the gas downstream.
|
|
| 8. |
- Gustavsson, S., et al.
(författare)
-
Suppressing relaxation in superconducting qubits by quasiparticle pumping
- 2016
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 354:6319, s. 1573-1577
-
Tidskriftsartikel (refereegranskat)abstract
- Copyright 2016 by the American Association for the Advancement of Science; all rights reserved.Dynamical error suppression techniques are commonly used to improve coherence in quantum systems.They reduce dephasing errors by applying control pulses designed to reverse erroneous coherent evolution driven by environmental noise. However, such methods cannot correct for irreversible processes such as energy relaxation.We investigate a complementary, stochastic approach to reducing errors: Instead of deterministically reversing the unwanted qubit evolution, we use control pulses to shape the noise environment dynamically. In the context of superconducting qubits, we implement a pumping sequence to reduce the number of unpaired electrons (quasiparticles) in close proximity to the device. A 70%reduction in the quasiparticle density results in a threefold enhancement in qubit relaxation times and a comparable reduction in coherence variability.
|
|
| 9. |
- La Spina, Rita, et al.
(författare)
-
Chemically modified poly(2-hydroxyethyl methacrylate) cryogel for the adsorption of heparin.
- 2014
-
Ingår i: Journal of Biomedical Materials Research. Part B - Applied Biomaterials. - : Wiley. - 1552-4981 .- 1552-4973. ; 102:6, s. 1207-1216
-
Tidskriftsartikel (refereegranskat)abstract
- Various clinical procedures, such as cardiovascular surgery or extracorporeal blood purification, involve systemic anticoagulation using heparin. High concentrations of circulating heparin require neutralization due to possible serious bleeding complications. The intravenous administration of the heparin antagonist protamine sulfate is routinely clinically performed, but is frequently associated with adverse reactions. Therefore, there is a need for a valid and safe alternative to achieve extracorporeal heparin removal from blood or plasma, such as a filter, a matrix, or an adsorbent. Here, we describe the development of a macroporous poly(2-hydroxyethyl methacrylate)-based monolithic cryogel functionalized with l-lysine (pHEMA-lys) and the characterization of its selective heparin adsorption. The maximum binding capacity was quantified in vitro using aqueous and serum solutions under static and dynamic conditions, and fresh human plasma under static conditions. The pHEMA-lys bound 40,500 IU and 32,500 IU heparin/g cryogel at the equilibrium in aqueous solution and 50% serum, respectively. In human plasma spiked with 100 IU/mL of heparin, the binding was still highly efficient (4330 IU/g cryogel after 30 min, i.e., 87% of the initial concentration). The cryogels showed good blood compatibility, as indicated by negligible adsorption of albumin, antithrombin III, and total protein, and may thus be suitable for extracorporeal heparin removal. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2014.
|
|
| 10. |
- Saeed, Nazeer T., 1985-, et al.
(författare)
-
An Approach for Modeling Spatial Prepositions with RDF Reification and Blank Nodes Based on the Environment Perception of a Simulated Mobile Robot
- 2018
-
Ingår i: 2018 IEEE 61st International Midwest Symposium on Circuits and Systems (MWSCAS). - : IEEE. - 9781538673935 ; , s. 713-716
-
Konferensbidrag (refereegranskat)abstract
- Today, thanks to the advancement of robotics and the achievements that are made in the light of the development of automated and intelligent technologies, we are increasingly witnessing the arrival of robotic devices and machines into different areas of human life. With all of the achievements and their intelligence, the degree of their proficiency relies in many cases on their ability to interact with human beings. To do so, for a mobile robot the ability to understand its surroundings and also to describe it in a way that human can easily understand is vitally important. “Above”, “below”, “in front of”, “behind of”, “left of” and “right to” are prepositions that human uses in daily life to describe not only the relationship between objects but also to provide one's location implicitly. The Resource Description Framework, RDF, as one of the semantic web core components, can be employed for forming those prepositions. The idea is to utilize a smart sensor of a simulated, mobile robot for creating semantic information in RDF format that represents inter-object relations by using the same spatial prepositions that human uses in his daily life to describe his environment.
|
|
