| 1. |
- Abata, E., et al.
(författare)
-
Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV
- 2010
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 621:1-3, s. 134-150
-
Tidskriftsartikel (refereegranskat)abstract
- A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20-350 GeV and beam impact points and angles corresponding to pseudo-rapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit. (C) 2010 Published by Elsevier B.V.
|
|
| 2. |
|
|
| 3. |
- Murgas, F., et al.
(författare)
-
TOI-674b: An oasis in the desert of exo-Neptunes transiting a nearby M dwarf
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 653
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The NASA mission TESS is currently doing an all-sky survey from space to detect transiting planets around bright stars. As part of the validation process, the most promising planet candidates need to be confirmed and characterized using follow-up observations. Aims. In this article, our aim is to confirm the planetary nature of the transiting planet candidate TOI-674b using spectroscopic and photometric observations. Methods. We use TESS, Spitzer, ground-based light curves, and HARPS spectrograph radial velocity measurements to establish the physical properties of the transiting exoplanet candidate TOI-674b. We perform a joint fit of the light curves and radial velocity time series to measure the mass, radius, and orbital parameters of the candidate. Results. We confirm and characterize TOI-674b, a low-density super-Neptune transiting a nearby M dwarf. The host star (TIC 158588995, V = 14.2 mag, J = 10.3 mag) is characterized by its M2V spectral type with M = 0.420 ± 0.010 M , R = 0.420 ± 0.013 R , and Teff = 3514 ± 57 K; it is located at a distance d = 46.16 ± 0.03 pc. Combining the available transit light curves plus radial velocity measurements and jointly fitting a circular orbit model, we find an orbital period of 1.977143 ± 3 × 10-6 days, a planetary radius of 5.25 ± 0.17 R , and a mass of 23.6 ± 3.3 M implying a mean density of ρp =0.91 ± 0.15 g cm-3. A non-circular orbit model fit delivers similar planetary mass and radius values within the uncertainties. Given the measured planetary radius and mass, TOI-674b is one of the largest and most massive super-Neptune class planets discovered around an M-type star to date. It is found in the Neptunian desert, and is a promising candidate for atmospheric characterization using the James Webb Space Telescope.
|
|
| 4. |
- Zhang, Shidong, et al.
(författare)
-
Simple and complex polymer electrolyte fuel cell stack models : A comparison
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607685395 ; 86, s. 287-300
-
Konferensbidrag (refereegranskat)abstract
- In this paper, two distinct polymer electrolyte fuel cell stack models are constructed: a detailed numerical model (DNM) employing a fine-scale computational mesh and a coarse-mesh approach based on a distributed resistance analogy (DRA) where diffusion terms in the transport equations are replaced by rate terms. Both methods are applied to a 5-cell, high-temperature polymer electrolyte fuel cell stack with an active area of 200 cm2 per cell. The polarization curve and local current density distributions from both the DRA and DNM are compared with experimental data, finding good agreement. Temperature, pressure, Nernst potential, and species distributions are also exhibited. The DNM displays details of fine-scale local extrema not captured by the DRA; however, the latter requires orders of magnitude less computer processor power and memory for execution. Both methods provide much finer-scale results than present experimental techniques.
|
|
| 5. |
- Gottlob, H. D. B., et al.
(författare)
-
Gd silicate : A high-k dielectric compatible with high temperature annealing
- 2009
-
Ingår i: Journal of Vacuum Science & Technology B. - : American Vacuum Society. - 1071-1023 .- 1520-8567 .- 2166-2754 .- 2166-2746. ; 27:1, s. 249-252
-
Tidskriftsartikel (refereegranskat)abstract
- The authors report on the investigation of amorphous Gd-based silicates as high-k dielectrics. Two different stacks of amorphous gadolinium oxide (Gd(2)O(3)) and silicon oxide (SiO(2)) on silicon substrates are compared after annealing at temperatures up to 1000 degrees C. Subsequently formed metal oxide semiconductor capacitors show a significant reduction in the capacitance equivalent thicknesses after annealing. Transmission electron microscopy, medium energy ion scattering, and x-ray diffraction analysis reveal distinct structural changes such as consumption of the SiO(2) layer and formation of amorphous Gd silicate. The controlled formation of Gd silicates in this work indicates a route toward high-k dielectrics compatible with conventional, gate first complementary metal-oxide semiconductor integration schemes.
|
|
| 6. |
- Altomonte, Sergio, et al.
(författare)
-
Integrating daylighting and lighting in practice : Lessons learned from international case studies
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This report presents lessons learned from twenty-five worldwide real-life case studies implementing the integration of daylighting and electric lighting. The case studies were monitored with respect to energy use for lighting, visual performance, non-visual performance, and users’ satisfaction. The monitoring is largely based on field measurements, but it is also complemented with simulations and calculations where needed.The report is divided in two parts. The first part provides an overview of the case studies and the overall lessons learned. The second part provides factsheets for each of the case studies; the factsheets include details on the monitoring, results, and specific lessons learned.Based on the lessons learned from the case studies, this report concludes that:• The energy demand for lighting is drastically reduced thanks to the combined effect of more efficient light sources, advances in controls, and raised awareness in the integration of daylighting and electric lighting.• Integrative lighting is currently driving the innovation in lighting technology and wider implementation is expected as knowledge in the field of non-visual requirements for lighting expands.• However, the current integration of the integrative lighting concept with daylighting in practice is limited, which may result in significant energy rebound (increases).• Daylighting integration is of utmost importance for achieving quality beyond energy savings.• Integrated daylighting and electric lighting design is facing new challenges: questions connected with comfort and health are yet to be answered
|
|
| 7. |
- Delsing, Per, 1959, et al.
(författare)
-
The 2019 surface acoustic waves roadmap
- 2019
-
Ingår i: Journal of Physics D: Applied Physics. - : IOP Publishing. - 1361-6463 .- 0022-3727. ; 52:35
-
Forskningsöversikt (refereegranskat)abstract
- Today, surface acoustic waves (SAWs) and bulk acoustic waves are already two of the very few phononic technologies of industrial relevance and can been found in a myriad of devices employing these nanoscale earthquakes on a chip. Acoustic radio frequency filters, for instance, are integral parts of wireless devices. SAWs in particular find applications in life sciences and microfluidics for sensing and mixing of tiny amounts of liquids. In addition to this continuously growing number of applications, SAWs are ideally suited to probe and control elementary excitations in condensed matter at the limit of single quantum excitations. Even collective excitations, classical or quantum are nowadays coherently interfaced by SAWs. This wide, highly diverse, interdisciplinary and continuously expanding spectrum literally unites advanced sensing and manipulation applications. Remarkably, SAW technology is inherently multiscale and spans from single atomic or nanoscopic units up even to the millimeter scale. The aim of this Roadmap is to present a snapshot of the present state of surface acoustic wave science and technology in 2019 and provide an opinion on the challenges and opportunities that the future holds from a group of renown experts, covering the interdisciplinary key areas, ranging from fundamental quantum effects to practical applications of acoustic devices in life science.
|
|
| 8. |
|
|
| 9. |
- Gentile, Niko, et al.
(författare)
-
Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies
- 2022
-
Ingår i: Energy and Buildings. - : Elsevier BV. - 0378-7788. ; 268
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents and discusses the lessons learned from the monitoring of 25 integrated daylighting and electric lighting international case study projects. The case studies consist of real occupied buildings that have been monitored as part of the International Energy Agency (IEA) SHC Task 61/EBC Annex 77 Programme. The general goal of the case studies was to balance lighting energy use with occupants’ visual and non-visual requirements. This was achieved using innovative solutions for daylighting and electric lighting with advanced controls, but also implementing simple and out-of-the-box strategies. The findings suggest that energy demands for lighting can significantly be reduced by combining sensible daylight provision, efficient lighting sources, and advances in controls. Yet, the effective achievement of project goals requires adequate monitoring, fine-tuning, and verification. The findings also suggest that the adoption of “integrative” lighting – that is, lighting systems that address both visual and non-visual responses – is getting increasingly popular. Catering to non-visual requirements will likely drive further innovation in lighting technology. Currently, there is limited investment available for developing daylighting systems for integrative lighting, and the current related electric strategies often come at the risk of energy rebound effects. Overall, providing daylighting and understanding user requirements are fundamental steps towards achieving quality projects, with potential benefits beyond saving energy.
|
|
| 10. |
- Gentile, Niko, et al.
(författare)
-
Literature review - Energy saving potential of user-centered integrated lighting solutions
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This report presents lessons learned from twenty-five worldwide real-life case studies implementing the integration of daylighting and electric lighting. The case studies were monitored with respect to energy use for lighting, visual performance, non-visual performance, and users’ satisfaction. The monitoring is largely based on field measurements, but it is also complemented with simulations and calculations where needed.The report is divided in two parts. The first part provides an overview of the case studies and the overall lessons learned. The second part provides factsheets for each of the case studies; the factsheets include details on the monitoring, results, and specific lessons learned.Based on the lessons learned from the case studies, this report concludes that:• The energy demand for lighting is drastically reduced thanks to the combined effect of more efficient light sources, advances in controls, and raised awareness in the integration of daylighting and electric lighting.• Integrative lighting is currently driving the innovation in lighting technology and wider implementation is expected as knowledge in the field of non-visual requirements for lighting expands.• However, the current integration of the integrative lighting concept with daylighting in practice is limited, which may result in significant energy rebound (increases).• Daylighting integration is of utmost importance for achieving quality beyond energy savings.• Integrated daylighting and electric lighting design is facing new challenges: questions connected with comfort and health are yet to be answered.
|
|
