| 1. |
- Wu, Nanhua
(författare)
-
Molecular Thermodynamic Models for Nano-Micro Fluid/Solid Interfaces
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Introducing materials with large interfaces to enhance process performance has become a feature of advanced chemical engineering, where the research focus has been changed from the traditional ideal isotropic fluid in the bulk phase to the highly non-ideal anisotropic confined fluid on the nano-micro interfaces, owing to the strong and asymmetric interactions between the complex fluids (supported metal nanoparticles, ionic liquids, proteins, etc.) and the sophisticated solid-surface (roughness, electrostatic effects, chemical heterogeneities, etc.). The traditional theories cannot be used to accurately describe the properties of the fluids at the complex solid-surfaces, due to the lack of considering molecular interactions between the fluid and solid-surface, and establishing new models is essential.In this thesis, a generalized interfacial molecular thermodynamic model was proposed with the consideration of molecular interactions between the fluid and solid-surface. Firstly, the original and surface-energy modified Gibbs-Thomson equations were analyzed to calculate the melting points of mono noble metals and compared with the literature data, highlighting the importance of developing new models with the consideration of the interfacial effect. An empirical model was proposed to represent the interfacial effect for calculating the melting points of mono noble metals. Then, the mono noble metal nanoparticle supported at the flat solid-surface was chosen as the “model” system to develop a generalized model, and the developed model was extended to the supported alloy systems. The CO2 absorption capacity (or solubility) of the ionic liquids immobilized on the porous solid materials (substrates) was further investigated with the developed model. The main results were summarized as follows:To develop models for representing the melting points of mono noble metal nanoparticles, the original and surface-energy modified Gibbs-Thomson equations were analyzed and then further modified empirically considering the effect of substrate. The results revealed that the original Gibbs–Thomson equation is invalid for the particles with radii smaller than 10 nm, and the performance of the surface-energy modified equation was improved but further modification by considering the interfacial effect is necessary for the particles smller than 5 nm in radius. The empirical model with the interfacial effect further improved the model performance, and the adjustable parameters can be predicted quantitatively from the thermodynamic properties of the metal and substrate. Additionally, the micro-wetting parameter αw can be used to qualitatively study the overall impact of the substrate on the melting point depression.Combined with the analysis of the corresponding state theory, a generalized molecular thermodynamic model was developed. It was found that, the developed generalized model can provide accurate results of melting points with deviations within ± 15 K. The developed model was used to predict the melting point of Pt nanoparticles on the substrates of TiO2 and carbon (C), and the results showed that Pt on TiO2 was more stable than that on C, being consistent with the newly measured experimental results.The generalized model was further parameterized based on the analysis of the interfacial tensions and molar volumes of Al-Si3N4, Pb-Si, Bi-C, and In-C, and the model showed the deviation was within ± 36 K. The model with fully generalized parameters was extended to the supported alloy nanoparticles to illustrate their stabilities, where the common catalysts, Pd-Au alloy nanoparticles supported on different substrates, developed for H2O2 reaction, were chosen as the examples. The model prediction displayed that the Pd-Au alloy nanoparticles supported on C/TiO2 (molar ratio: 0.01) with the mass proportion Pd5Au1 (i.e., mass ratio of 5:1) is more stable than the mono noble metals. Furthermore, the model prediction indicated that the supported alloy nanoparticles are more stable than the supported Pd.The generalized model was also successfully extended to study the CO2 absorption capacity in the immobilized ionic liquids, where the Gibbs free energy of CO2 in the immobilized ionic liquids was modeled from both macro- and micro-analyses. The theoretical investigations revealed that the substrate has a crucial effect on the gas solubility in the ionic liquid immobilized on the substrates, and the performance of the model with the consideration of surface-energy and interfacial effects was further verified with the newly determined experimental data.
|
|
| 2. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
- Jian, J., et al.
(författare)
-
Multi-stage supply restoration of active distribution networks with SOP integration
- 2022
-
Ingår i: Sustainable Energy, Grids and Networks. - : Elsevier Ltd. - 2352-4677. ; 29
-
Tidskriftsartikel (refereegranskat)abstract
- Supply restoration from outages is essential for improving the reliability of active distribution networks (ADNs) after fault isolation. Soft open point (SOP) can adjust the power flow among feeders and provide voltage support for power outage areas. Considering the sequential coordination of switching operation and SOP control mode selection, a multi-stage supply restoration method with SOPs is proposed for ADNs. First, the sequential energization is formulated, in which the impact of SOP control mode on restoration sequence is analyzed. By providing voltage support, the coordination of SOPs will rapidly energize the outage area and improve the voltage profile. Then, a multi-stage restoration model with SOPs is proposed, in which reconfiguration of switches and control mode selection of SOPs are coordinated in sequence to maximize the load recovery level of ADNs. Through the switching action-time mapping, secure operation is ensured during the entire supply restoration process. Finally, the effectiveness of the proposed method is validated on a modified IEEE 33-node distribution system and practical distribution networks with four-terminal SOP. Results show that the proposed method can fully exploit the potential benefits of SOPs and effectively enhance the load recovery level of ADNs.
|
|
| 4. |
- Tommasini, R., et al.
(författare)
-
Accepted Tutorials at The Web Conference 2022
- 2022
-
Ingår i: WWW 2022 - Companion Proceedings of the Web Conference 2022. - New York, NY, USA : Association for Computing Machinery (ACM). ; , s. 391-399
-
Konferensbidrag (refereegranskat)abstract
- This paper summarizes the content of the 20 tutorials that have been given at The Web Conference 2022: 85% of these tutorials are lecture style, and 15% of these are hands on.
|
|
| 5. |
- Wu, P., et al.
(författare)
-
Interval Number-Based Safety Reasoning Method for Verification of Decentralized Power Systems in High-Speed Trains
- 2021
-
Ingår i: Mathematical problems in engineering (Print). - : Hindawi Limited. - 1024-123X .- 1563-5147. ; 2021
-
Tidskriftsartikel (refereegranskat)abstract
- Decentralized power systems are commonly used in high-speed trains. However, many parameters in decentralized power systems are uncertain and inevitably have errors. We present a reasoning method based on the interval numbers for decentralized power systems in high-speed trains. Uncertain parameters and their unavoidable errors are quantitatively described by interval numbers. We also define generalized linear equations with interval numbers (LAIs), which can be used to describe the movement of the train. Furthermore, it is proven that the zero sets of LAIs are convex. Therefore, the inside of the fault-tolerance area can be formed by their vertexes and edges and represented by linear inequalities. Consequently, we can judge whether the system is working properly by verifying that the current system state is in the fault-tolerance area. Finally, a fault-tolerance area is obtained, which can be determined by linear equations with an interval number, and we test the correctness of the fault-tolerance area through large-scale random test cases.
|
|
| 6. |
- Zhao, Jinli, et al.
(författare)
-
Peer-to-Peer electricity trading of interconnected flexible distribution networks based on Non-Cooperative games
- 2023
-
Ingår i: International Journal of Electrical Power & Energy Systems. - : Elsevier Ltd. - 0142-0615 .- 1879-3517. ; 145
-
Tidskriftsartikel (refereegranskat)abstract
- With the integration of power electronic devices represented by soft open points (SOPs), distribution networks have gradually evolved into interconnected flexible distribution networks (FDNs). Considering the deregulation of electricity market and user privacy, multiple stakeholders have participated in the operation of FDNs. Peer-to-peer (P2P) electricity trading is promising to alleviate operational problems of interconnected FDNs. As multiple regions pursue the maximum profits individually, non-cooperative game methods can be utilized to realize fair profit allocation in P2P trading. In this paper, a non-cooperative game-based P2P trading method is proposed to meet the electricity trading needs of multi-region interconnected FDNs. First, based on non-cooperative games, a two-layer P2P electricity trading framework is established to realize cost reduction and voltage profile improvement of multi-region interconnected FDNs. Then, a P2P trading adjustment mechanism is designed to improve the operational profits of SOP, in which spatial active power trading adjustment, temporal dispatching of energy storage (ES) link and reactive power support are incorporated. Finally, the effectiveness of the proposed method is verified based on a practical distribution network with four-terminal SOP in Tianjin. The results show that the proposed P2P electricity trading method can promote the economic operation performance of interconnected FDNs and improve the operational profit of SOP.
|
|
| 7. |
- Wu, Kuan-Hsun, et al.
(författare)
-
Considerations of SiP based Antenna in Package/Module (AiP/AiM) Design at Sub-Terahertz Frequencies for Potential B5G/6G Applications
- 2021
-
Ingår i: Proceedings - Electronic Components and Technology Conference. - 0569-5503. ; 2021-June, s. 1162-1168
-
Konferensbidrag (refereegranskat)abstract
- Antenna-in-Package/Module (AiP/AiM) are the primary technologies to realize the RF subsystems for frequencies beyond millimeter-wave (mmW) bands, including sub-terahertz for potential B5G/6G applications. Due to the small wavelength, the mechanical process of the current system-in-package (SiP) results in limitations to realize antenna arrays at sub-terahertz. In this paper, the mechanical limits to cause radiation discrepancy is investigated by designing an AiP/AiM at 110 GHz band. Through the parametric studies based on the currently available cheap SiP process, one may summarize the considerations of AiP/AiM design for beyond sub-terahertz frequencies. The examination will consider the design of an 8x8 antenna array to provide a radiation gain of 20 dBi. Numerical full-wave simulations by HFSS were performed to obtain reliable behaviors of AiP/AiM radiations.
|
|
| 8. |
- Dong, Yihui, et al.
(författare)
-
Excellent Trace Detection of Proteins on TiO2Nanotube Substrates through Novel Topography Optimization
- 2020
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 124:50, s. 27790-27800
-
Tidskriftsartikel (refereegranskat)abstract
- For improving the surface-enhanced Raman scattering (SERS) performance of nanomaterials to achieve trace detection of proteins and complex biological systems, structural and topographical control is one of the important strategies. In this work, a facial and effective method to optimize the topography of TiO2 nanotube arrays (TNAs) is demonstrated, together with a significant enhancement of the SERS performance of cytochrome C (Cyt C) on TNAs. An enhancement factor (EF) up to 104, which is obtained with the newly developed method on the basis of the quantification of atomic force microscopy (AFM)-measured interaction force, is achieved, corresponding to a superior detection limit of Cyt C down to 10-7 M. The main reason is that adjusting the fluoride contents in an electrolyte (from 0.4 to 0.1 wt %) can reduce the content and sizes of cracks, as well as the tube ruptures of TNAs, where the fluoride content at 0.2 wt % can successfully provide the excellent and optimized topography of TNAs. The TNAs with the optimized topography, especially those with larger tube diameters, demonstrated the importance of structural integrity on a remarkably excellent SERS performance in the trace detection of proteins. The proposed method will stimulate the development and optimization of the active substrate on the SERS applications in biology, bioanalysis, and nanoscience. © 2020 American Chemical Society.
|
|
| 9. |
- Wu, Ji, et al.
(författare)
-
Optimized multi-source fusion based state of health estimation for lithium-ion battery in fast charge applications
- 2022
-
Ingår i: IEEE Transactions on Energy Conversion. - 1558-0059 .- 0885-8969. ; 37:2, s. 1489-1498
-
Tidskriftsartikel (refereegranskat)abstract
- Knowing the health state of the batteries would enhance the energy storage system's reliability and safety, especially for fast charge applications. Here we propose a synergetic method with the help of the genetic algorithm (GA) and the support vector regression (SVR) for SOH estimation. Firstly, features for battery aging process description are selected from the multi-source data, including current, voltage, and temperature, in the battery charging process. The SVR is then employed to establish a battery aging model and estimate the SOH with the generated features. Afterward, the feature set which can optimize the pre-set objective, namely minimize the SOH estimation error and the defined difficulty of feature acquisition, are selected by the GA via an iterative process. Experimental results indicate that the selected feature set generated from the charged capacity and temperature rise data may perform a better SOH estimation. Moreover, by collaborating with the chosen features, the SVR is found to have a similar SOH estimation accuracy to a more complex algorithm while using less computation power. Furthermore, it should be noted that the selected features are obtainable in about 95% of the charging operations according to the voltage distribution resulting from more than 40,000 actual charging bills.
|
|
| 10. |
- Cao, Jing, et al.
(författare)
-
Demonstration of Spectral Phase O-CDMA Encoding and Decoding in Monolithically Integrated Arrayed-Waveguide-Grating-Based Encoder
- 2006
-
Ingår i: IEEE Photonics Technology Letters. - 1041-1135 .- 1941-0174. ; 18:21-24, s. 2602-2604
-
Tidskriftsartikel (refereegranskat)abstract
- We report on successful spectral phase encoding and decoding operation in a pair of monolithically integrated InP encoder chips, each consisting of an arrayed waveguide grating (AWG) pair and an eight-channel electrooptic phase shifter array. The monolithic fabrication process includes anisotropic reactive ion etching and planarizing hydride-vapor-phase-epitaxy lateral regrowth to realize buried hetero-waveguide structures in AWGs and phase shifters. Electrooptical modulation in the phase shifter arrays in the encoder chip achieved Walsh-code-based optical code-division multiple access (O-CDMA) encoding and decoding. The matched-code encoding-decoding operation resulted in error-free performance in the presence of an interferer, indicating good potential for O-CDMA network applications.
|
|
