| 1. |
- Müser, M. H., et al.
(författare)
-
Meeting the Contact-Mechanics Challenge
- 2017
-
Ingår i: Tribology letters. - : Springer New York LLC. - 1023-8883 .- 1573-2711. ; 65:4
-
Tidskriftsartikel (refereegranskat)abstract
- This paper summarizes the submissions to a recently announced contact-mechanics modeling challenge. The task was to solve a typical, albeit mathematically fully defined problem on the adhesion between nominally flat surfaces. The surface topography of the rough, rigid substrate, the elastic properties of the indenter, as well as the short-range adhesion between indenter and substrate, were specified so that diverse quantities of interest, e.g., the distribution of interfacial stresses at a given load or the mean gap as a function of load, could be computed and compared to a reference solution. Many different solution strategies were pursued, ranging from traditional asperity-based models via Persson theory and brute-force computational approaches, to real-laboratory experiments and all-atom molecular dynamics simulations of a model, in which the original assignment was scaled down to the atomistic scale. While each submission contained satisfying answers for at least a subset of the posed questions, efficiency, versatility, and accuracy differed between methods, the more precise methods being, in general, computationally more complex. The aim of this paper is to provide both theorists and experimentalists with benchmarks to decide which method is the most appropriate for a particular application and to gauge the errors associated with each one..
|
|
| 2. |
- Jiang, L., et al.
(författare)
-
Experimental investigation on BOF slag oxidation in air
- 2019
-
Ingår i: Ironmaking & steelmaking. - : Taylor and Francis Ltd.. - 0301-9233 .- 1743-2812. ; 46:8, s. 747-754
-
Tidskriftsartikel (refereegranskat)abstract
- Basic oxygen furnace (BOF) slag contains a significant amount of iron-containing species, which is considered to be iron resources and therefore need to be recovered. In this work, the oxidation behaviour of BOF slag under air (at selected oxidation temperatures and holding time) was investigated to explore the potential of transforming non-magnetic wustite in the BOF slag into magnetic spinel, which may subsequently be recovered by magnetic separation. The experimental results show that the iron-containing spices in the BOF slag can be oxidised into magnetic spinel phases in the investigated temperature range of 1000–1150°C and thereafter be recovered by magnetic separation. The formation of these phases is closely related to the oxidation temperatures and holding time: a higher oxidation temperature and longer holding time lead to a larger amount of formed magnetic species; however, the amount of formed magnetic species decreases at elevated temperature (>1050°C) and with extended holding time (>40 min).
|
|
| 3. |
- Sefidari, Hamid, et al.
(författare)
-
The effect of co-firing coal and woody biomass upon the slagging/deposition tendency in iron-ore pelletizing grate-kiln plants
- 2020
-
Ingår i: Fuel processing technology. - : Elsevier B.V.. - 0378-3820 .- 1873-7188. ; 199
-
Tidskriftsartikel (refereegranskat)abstract
- Woody biomass is being considered a potential co-firing fuel to reduce coal consumption in iron-ore pelletizing rotary kilns. An important consideration is the slagging inside the kiln caused by ash deposition that can lead to process disturbances or shutdowns. In terms of ash chemistry, co-firing woody biomass implies the addition of mainly Ca and K to the Si- and Al-dominated coal-ash (characteristic of high-rank coals) and Fe from the iron-ore that are both inherent to the process. An alkali-laden gaseous atmosphere is also present due to the accumulation of alkali via the recirculation of flue gas in the system. The slagging propensity of blending woody biomass with coal in the grate-kiln process was studied based on the viscosity of the molten phases predicted by global thermochemical equilibrium modeling. This was carried out for variations in temperature, gaseous KOH atmosphere, and fuel blending levels. Results were evaluated and compared using a qualitative slagging indicator previously proposed by the authors where an inverse relationship between deposition tendency and the viscosity of the molten fraction of the ash was established. The results were also compared with a set of co-firing experiments performed in a pilot-scale (0.4 MW) experimental combustion furnace. In general, the co-firing of woody biomass would likely increase the slagging tendency via the increased formation of low-viscosity melts. The fluxing behavior of biomass-ash potentially reduces the viscosity of the Fe-rich aluminosilicate melt and intensifies deposition. However, the results also revealed that there are certain conditions where deposition tendency may decrease via the formation of high-melting-point alkali-containing solid phases (e.g., leucite).
|
|
| 4. |
|
|
| 5. |
- Wu, Yaoxing, et al.
(författare)
-
A reference method for measuring emissions of SVOCs in small chambers
- 2016
-
Ingår i: Building and Environment. - : Elsevier. - 0360-1323 .- 1873-684X. ; 95, s. 126-132
-
Tidskriftsartikel (refereegranskat)abstract
- Semi-volatile organic compounds (SVOCs) are indoor air pollutants that may have significant adverse effects on human health. Although emissions of volatile chemicals from building materials and consumer products are usually characterized in small chambers, few chamber studies have been conducted for SVOCs due to the challenges associated with analysis and the lack of validation procedures. There is an urgent need for a reliable and accurate chamber test method to verify these measurements. A reference method employing a specially-designed chamber has been developed and is undergoing extensive evaluation. A pilot inter-laboratory study (ILS) has been conducted with six laboratories performing chamber tests under identical conditions for di-2-ethylhexyl phthalate (DEHP). Results from this study showed inter-laboratory variations of 24% for DEHP emission rates, with closer agreement observed among intra-laboratory measurements for most of the participating laboratories. A mechanistic emission model fits well to the measured concentration profiles, demonstrating the feasibility of the proposed reference method to independently assess laboratory performance and validate SVOC emission tests.
|
|
| 6. |
- Zhang, L., et al.
(författare)
-
Quantum Noise Secured Terahertz Communications
- 2023
-
Ingår i: IEEE Journal of Selected Topics in Quantum Electronics. - : Institute of Electrical and Electronics Engineers Inc.. - 1077-260X .- 1558-4542. ; 29:5
-
Tidskriftsartikel (refereegranskat)abstract
- The terahertz communications display an important role in high-speed wireless communications, the security threat from the eavesdroppers in the terahertz communications has been gaining attention recently. The true randomness in the physical layer can ensure one-time-pad encryption for secured terahertz communications, however, physical layer security schemes like the quantum key distribution methods suffer from device imperfections that limit the desirable signal rate and link distance. Herein, we present the quantum noise secured terahertz wireless communications with photonic terahertz signal generation schemes. With the high-order diffusion algorithms, the signal is masked by the quantum noise ciphers to the eavesdroppers and cannot be detected because the inevitable randomness by quantum noise measurement will cause physical measurement errors. In the experiment, we demonstrate 16 Gbits-1 quantum noise secured terahertz wireless communications with the conventional optical communication realms and devices, operating at 300 GHz terahertz frequency. This quantum noise secured terahertz communication approach is a significant step toward high-security wireless communications.
|
|
| 7. |
|
|
