| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
|
|
| 3. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 4. |
- Georgiou, Konstantinos, et al.
(författare)
-
Genetic basis of PD-L1 overexpression in diffuse large B-cell lymphomas
- 2016
-
Ingår i: Blood. - : American Society of Hematology. - 0006-4971 .- 1528-0020. ; 127:24, s. 3026-3034
-
Tidskriftsartikel (refereegranskat)abstract
- Diffuse large B-cell lymphoma (DLBCL) is one of the most common and aggressive types of B-cell lymphoma. Deregulation of proto-oncogene expression after a translocation, most notably to the immunoglobulin heavy-chain locus (IGH), is one of the hallmarks of DLBCL. Using whole-genome sequencing analysis, we have identified the PD-L1/PD-L2 locus as a recurrent translocation partner for IGH in DLBCL. PIM1 and TP63 were also identified as novel translocation partners for PD-L1/PD-L2. Fluorescence in situ hybridization was furthermore used to rapidly screen an expanded DLBCL cohort. Collectively, a subset of samples was found to be affected by gains (12%), amplifications (3%), and translocations (4%) of the PD-L1/PD-L2 locus. RNA sequencing data coupled with immunohistochemistry revealed that these cytogenetic alterations correlated with increased expression of PD-L1 but not of PD-L2. Moreover, cytogenetic alterations affecting the PD-L1/PD-L2 locus were more frequently observed in the non-germinal center B cell-like (non-GCB) subtype of DLBCL. These findings demonstrate the genetic basis of PD-L1 overexpression in DLBCL and suggest that treatments targeting the PD-1-PD-L1/PD-L2 axis might benefit DLBCL patients, especially those belonging to the more aggressive non-GCB subtype.
|
|
| 5. |
- Liu, Zhiying, et al.
(författare)
-
Solution-Processable Nanotube/Polymer Composite for High-Performance TFTs
- 2011
-
Ingår i: IEEE Electron Device Letters. - 0741-3106 .- 1558-0563. ; 32:9, s. 1299-1301
-
Tidskriftsartikel (refereegranskat)abstract
- Thin-film field-effect transistors (TFTs) are readily fabricated using a semiconductor composite that is solution processed under ambient conditions for the conduction channel. The composite comprises single-walled carbon nanotubes (SWCNTs) embedded in poly-9,9' dioctyl-fluorene-co-bithiophene. Carrier mobility values approaching 10 cm(2)V(-1)s(-1) are obtained for the composite with relatively high SWCNT concentrations. When the SWCNT concentration is reduced for a large ON/OFF current ratio > 10(6), the mobility remains decent around 0.3 cm(2)V(-1)s(-1). The resultant TFTs display remarkable environmental and operational reliability. Nanotube-based composites are therefore of significance in printed electronics owing to their simplicity in device fabrication and competitiveness in device performance.
|
|
| 6. |
- Lopez Cabezas, Ana, 1980-, et al.
(författare)
-
Influence of Carbon Nanotubes on Thermal Stability of Water-Dispersible Nanofibrillar Polyaniline/Nanotube Composite
- 2012
-
Ingår i: Materials. - Basel, Switzerland : MDPI AG. - 1996-1944 .- 1996-1944. ; 5:2, s. 327-335
-
Tidskriftsartikel (refereegranskat)abstract
- Significant influence on the thermal stability of polyaniline (PANI) in the presence of multi-walled carbon nanotubes (MWCNTs) is reported. By means of in-situ rapid mixing approach, water-dispersible nanofibrillar PANI and composites, consisting of MWCNTs uniformly coated with PANI in the state of emeraldine salt, with a well-defined core-shell heterogeneous structure, were prepared. The de-protonation process in PANI occurs at a lower temperature under the presence of MWCNTs on the polyaniline composite upon thermal treatment. However, it is found that the presence of MWCNTs significantly enhances the thermal stability of PANI's backbone upon exposure to laser irradiation, which can be ascribed to the core-shell heterogeneous structure of the composite of MWCNTs and PANI, and the high thermal conductivity of MWCNTs.
|
|
| 7. |
- Zou, Wei, et al.
(författare)
-
Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes
- 2018
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Efficiency roll-off is a major issue for most types of light-emitting diodes (LEDs), and its origins remain controversial. Here we present investigations of the efficiency roll-off in perovskite LEDs based on two-dimensional layered perovskites. By simultaneously measuring electroluminescence and photoluminescence on a working device, supported by transient photoluminescence decay measurements, we conclude that the efficiency roll-off in perovskite LEDs is mainly due to luminescence quenching which is likely caused by non-radiative Auger recombination. This detrimental effect can be suppressed by increasing the width of quantum wells, which can be easily realized in the layered perovskites by tuning the ratio of large and small organic cations in the precursor solution. This approach leads to the realization of a perovskite LED with a record external quantum efficiency of 12.7%, and the efficiency remains to be high, at approximately 10%, under a high current density of 500 mA cm(-2).
|
|
| 8. |
- Gong, Yaopeng, et al.
(författare)
-
Density Measurement of Molten Drop With Aerodynamic Levitation and Laser Heating
- 2022
-
Ingår i: Frontiers in Energy Research. - : Frontiers Media SA. - 2296-598X. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Thermophysical properties of molten core materials (corium) are necessary input parameters of models and computer codes which predict the severe accident progression in light water reactors. The corium contains the components of UO2, ZrO2, Zr and Fe. The measurement of molten corium properties is a very challenging task due to high melting points of corium which can reach 3000 K. This paper presents a density measurement system for a molten drop based on techniques of aerodynamic levitation, laser heating and image processing. A sphere of alumina was firstly levitated by argon gas flow above a conical converging-diverging nozzle. The sphere was then heated up and melted into a liquid drop by a laser beam. The shape of the drop was recorded by a high-speed camera, and the density was calculated from image processing.
|
|
| 9. |
- Gong, Yaopeng, et al.
(författare)
-
Surface Tension Measurement of Molten Zirconia with Aerodynamic Levitation and Laser Heating
- 2023
-
Ingår i: Proceedings of the 30th International Conference on Nuclear Engineering "Nuclear, Thermal, and Renewables: United to Provide Carbon Neutral Power", ICONE 2023. - : American Society of Mechanical Engineers (ASME).
-
Konferensbidrag (refereegranskat)abstract
- Thermophysical properties of corium are required in models and computer codes to predict the severe accident progression in light water reactors. However, the measurement of molten corium properties is challenging due to high melting points. This paper presents a surface tension measurement system for molten zirconia based on techniques of aerodynamic levitation and laser heating. Zirconia is one of the main components in corium and aerodynamic levitation is a contactless method to avoid interactions between the sample and container wall at high temperatures. A sample of zirconia was levitated by argon gas flow above a conical converging-diverging nozzle and then melted into a droplet by laser beams. The oscillation of molten zirconia was imaged by a high-speed camera. The resonant frequency was then obtained through image processing. Finally, the surface tension was derived according to the Rayleigh formula.
|
|
| 10. |
- Gong, Yaopeng, et al.
(författare)
-
Viscosity measurement of molten alumina and zirconia using aerodynamic levitation, laser heating and droplet oscillation techniques
- 2023
-
Ingår i: Heliyon. - : Elsevier BV. - 2405-8440. ; 9:12
-
Tidskriftsartikel (refereegranskat)abstract
- Reliable thermophysical properties of core melt (corium) are essential for the accurate prediction of the severe accident progression in light water reactors. Zirconia is one of the most important materials in corium. Despite the high interest in the viscosity of molten zirconia, few experimental data have been reported due to its high melting temperature and high vapor pressure. In the present study, the viscosity of molten zirconia was measured using aerodynamic levitation, laser heating and droplet oscillation techniques. A material sample was levitated by argon gas flow in a conical nozzle and then melted into a droplet by laser beams. The initial quiescent droplet was forced to oscillate by the excitation of a loudspeaker, and the viscosity was deduced based on the characteristics of the droplet damped oscillation after the loudspeaker was turned off. The viscosity of molten alumina was first measured for verification of the measurement system. Afterwards the viscosity of molten zirconia was measured. The results showed that the viscosity of molten zirconia at melting temperature (2988K) was 12.87 ± 1.03 mPa s and decreased with increasing temperature. The measurement uncertainties are within 21 %.
|
|
