| 1. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 2. |
- Asano, H., et al.
(författare)
-
Spectroscopic study of the Λ(1405) resonance via the d (K-, n) reaction at J-PARC
- 2019
-
Ingår i: 13th International Conference on Hypernuclear and Strange Particle Physics, HYP 2018. - : AIP Publishing. - 9780735418721 ; 2130
-
Konferensbidrag (refereegranskat)abstract
- The structure of the Λ(1405) hyperon is an important and long-standing issue related to the K̄-nucleus interaction. The J-PARC E31 experiment has been performed to investigate the Λ(1405) spectrum shape. Because it is hard to form the Λ(1405) directly by a K̄N scattering in free space, E31 uses the d(K-, n) reaction with an incident kaon momentum of 1 GeV/c. We will identify three final states - ς-π+, ς+π-, ς0π0-so that the isospin structure of hyperon resonance states produced can be decomposed. The first physics run of the E31 experiment was performed in 2016. To enhance the statistics of the data set, we have performed the second physics run in the beginning of 2018. During the second run of E31, around 3.9×1010 kaons impacted on the deuteron target.
|
|
| 3. |
- Yamaga, Takumi, et al.
(författare)
-
Study of the elementary (K -, n) reactions to search for the K NN bound state via the 3He (K -, n) reaction at J-PARC
- 2016
-
Ingår i: XVIth International Conference on Hadron Spectroscopy, Hadron 2015. - : Author(s). - 9780735413894 ; 1735
-
Konferensbidrag (refereegranskat)abstract
- We have searched for the simplest kaonic nuclear state, K̄NN, using the in-flight 3He (K-, n) reaction at the J-PARC hadron experimental facility. In the semi-inclusive neutron missing-mass spectrum at θnlab=0°, an excess of yield was observed just below the K- pp mass-threshold, which cannot be explained by any elementary reactions [PTEP 2015, 061D01]. To understand the missing-mass spectrum of 3He (K-, n) X, we investigated the elementary (K-, n) reactions using hydrogen and deuterium targets. The p (K-, n) X missing-mass spectrum was well described by the charge-exchange reaction. However, in the d (K-, n) X spectrum, we observed an excess of yield just below the K- p mass-threshold, which was similar to that in the 3He (K-, n) X spectrum.
|
|
| 4. |
- Quack, N., et al.
(författare)
-
Silicon photonic MEMS : Exploiting mechanics at the nanoscale to enhance photonic integrated circuits
- 2019
-
Ingår i: Optics InfoBase Conference Papers. - Washington, D.C. : OSA - The Optical Society.
-
Konferensbidrag (refereegranskat)abstract
- With the maturing and the increasing complexity of Silicon Photonics technology, novel avenues are pursued to reduce power consumption and to provide enhanced functionality: exploiting mechanical movement in advanced Silicon Photonic Integrated Circuits provides a promising path to access a strong modulation of the effective index and to low power consumption by employing mechanically stable and thus non-volatile states. In this paper, we will discuss recent achievements in the development of MEMS enabled systems in Silicon Photonics and outline the roadmap towards reconfigurable general Photonic Integrated Circuits.
|
|
| 5. |
- Zhang, K., et al.
(författare)
-
Co-DIMM: Inter-Socket Data Sharing via a Common DIMM Channel
- 2016
-
Ingår i: Memsys 2016: Proceedings of the International Symposium on Memory Systems. - New York, NY, USA : ACM. - 9781450343053 ; 03-06-October-2016, s. 133-141
-
Konferensbidrag (refereegranskat)abstract
- To improve computing density, modern datacenters widely deploy server chassis with several processor sockets integrated as independent nodes. Distributed applications processing enormous datasets on such systems require frequent inter-node communication. Data sharing among distributed on-board socket nodes in the same server chassis via commodity networking and inter-socket connection technologies is inefficient, though. To address this problem, we propose inter-socket data sharing via normal memory access instructions. Co-DIMM eliminates the overheads of protocol-stack processing and data movement through the network. Instead of sharing data through centralized shared memory based on NUMA inter-socket connections, DDR switches allow Co-DIMM ownership to be changed dynamically to support asynchronous producer-consumer data sharing. We implement Co-DIMM in a custom in-house FPGA-based platform to generate preliminary results showing that data-sharing latency between two sockets is as low as 1.33 mu s. We present potential Co-DIMM usage scenarios and discuss implementation challenges.
|
|
| 6. |
- Zhang, Shidong, et al.
(författare)
-
Simple and complex polymer electrolyte fuel cell stack models : A comparison
- 2018. - 13
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-6737 .- 1938-5862. - 9781607685395 ; 86, s. 287-300
-
Konferensbidrag (refereegranskat)abstract
- In this paper, two distinct polymer electrolyte fuel cell stack models are constructed: a detailed numerical model (DNM) employing a fine-scale computational mesh and a coarse-mesh approach based on a distributed resistance analogy (DRA) where diffusion terms in the transport equations are replaced by rate terms. Both methods are applied to a 5-cell, high-temperature polymer electrolyte fuel cell stack with an active area of 200 cm2 per cell. The polarization curve and local current density distributions from both the DRA and DNM are compared with experimental data, finding good agreement. Temperature, pressure, Nernst potential, and species distributions are also exhibited. The DNM displays details of fine-scale local extrema not captured by the DRA; however, the latter requires orders of magnitude less computer processor power and memory for execution. Both methods provide much finer-scale results than present experimental techniques.
|
|
| 7. |
- Brunnström, Kjell, 1960-, et al.
(författare)
-
Industry and business perspectives on the distinctions between visually lossless and lossy video quality : Mobile and large format displays
- 2017
-
Ingår i: IS and T International Symposium on Electronic Imaging Science and Technology. - : Society for Imaging Science and Technology. ; , s. 118-133
-
Konferensbidrag (refereegranskat)abstract
- This paper will explore the mobile and business perspectives of visually lossless image quality, as well as review recent scientific advances. It is the outcome from the Special Session on Visually Lossless Video Quality for Modern Devices: Research and Industry Perspectives organized at the Human Vision and Electronic Imaging 2017 by IS&T at San Francisco Airport, Burlingame, California, USA, Jan 29 - Feb 2, 2017. It summarizes four presentations and a panel discussion.
|
|
| 8. |
- Huang, S., et al.
(författare)
-
Improved reliability of electrically conductive adhesives joints on Cu-Plated PCB substrate enhanced by graphene protection barrier
- 2017
-
Ingår i: 2017 IMAPS Nordic Conference on Microelectronics Packaging, NordPac 2017, Goteborg, Sweden, 18-20 June 2017. - 9781538630556 ; , s. 143-146
-
Konferensbidrag (refereegranskat)abstract
- Graphene protection barrier was introduced to the interface between the ECAs and Cu-plated wire to enhance the reliability of the ECAs joints on Cu-Plated PCB substrate due to its excellent properties of impermeability to all gases/salts as well as its thermal/chemical stability. The results of shear test indicated graphene protection barrier can improve the shear strength of the ECAs joints on Cu-plated PCB substrate by almost 22% after 500 hours high temperature and high humidity cyclic test. Characterizations by optical microscope and XPS were further performed to explain the mechanism. To sum up, it can be believed that the graphene protection barrier can dramatically enhance the reliability of the ECAs joints on Cu-Plated PCB substrate.
|
|
| 9. |
|
|
| 10. |
|
|
