| 1. |
- Berg, Alexander, et al.
(författare)
-
Growth of wurtzite AlxGa1-xP nanowire shells and characterization by Raman spectroscopy
- 2017
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:3
-
Tidskriftsartikel (refereegranskat)abstract
- The phonon energies of AlGaP in wurtzite crystal structure are generally not known, as opposed to their zincblende counterparts, because AlGaP crystallizes in zincblende phase in bulk and thin films structures. However, in nanowires AlGaP can be grown in wurtzite crystal structure. In this work we have grown wurtzite GaP/AlGaP/GaP core-shell nanowires by use of MOVPE. After developing suitable growth conditions, the Al composition was determined by STEM-EDX measurements and the wurtzite AlGaP phonon energies by Raman spectroscopy. Raman measurements show a peak shift with increasing Al composition in the AlGaP shell. We find that the phonon energies for wurtzite AlGaP are slightly lower than for zincblende AlGaP. Our results can be used to determine the Al composition in wurtzite AlGaP by Raman scattering.
|
|
| 2. |
- Dagyte, Vilgaile, et al.
(författare)
-
Growth kinetics of GaxIn(1−x)P nanowires using triethylgallium as Ga precursor
- 2018
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 29:39
-
Tidskriftsartikel (refereegranskat)abstract
- GaxIn(1−x)P nanowire arrays are promising for various optoelectronic applications with a tunable band-gap over a wide range. In particular, they are well suited as the top cell in tandem junction solar cell devices. So far, most GaxIn(1−x)P nanowires have been synthesized by the use of trimethylgallium (TMGa). However, particle assisted nanowire growth in metal organic vapor phase epitaxy is typically carried out at relatively low temperatures, where TMGa is not fully pyrolysed. In this work, we developed the growth of GaxIn(1−x)P nanowires using triethylgallium (TEGa) as the Ga precursor, which reduced Ga precursor consumption by about five times compared to TMGa due to the lower homogeneous pyrolysis temperature of TEGa. The versatility of TEGa is shown by synthesis of high yield GaxIn(1−x)P nanowire arrays, with a material composition tunable by the group III input flows, as verified by x-ray diffraction measurements and photoluminescence characterization. The growth dynamics of GaxIn(1−x)P nanowires was assessed by varying the input growth precursor molar fractions and growth temperature, using hydrogen-chloride as in situ etchant. We observed a complex interplay between the precursors. First, trimethylindium (TMIn) inhibits Ga incorporation into the nanowires, resulting in higher In composition in the grown nanowires than in the vapor. Second, the growth rate increases with temperature, indicating a kinetically limited growth, which from nanowire effective binary volume growth rates of InP and GaP can be attributed to the synthesis of GaP in GaxIn(1−x)P. We observed that phosphine has a strong effect on the nanowire growth rate with behavior expected for a unimolecular Langmuir–Hinshelwood mechanism of pyrolysis on a catalytic surface. However, growth rates increase strongly with both TEGa and TMIn precursors as well, indicating the complexity of vapor–liquid–solid growth for ternary materials. One precursor can affect the decomposition of another, and each precursor can affect the wetting properties and catalytic activity of the metal particle.
|
|
| 3. |
- Dagyte, Vilgaile, et al.
(författare)
-
Time-resolved photoluminescence characterization of GaAs nanowire arrays on native substrate
- 2017
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:50
-
Tidskriftsartikel (refereegranskat)abstract
- Time-resolved photoluminescence (TRPL) measurements of nanowires (NWs) are often carried out on broken-off NWs in order to avoid the ensemble effects as well as substrate contribution. However, the development of NW-array solar cells could benefit from non-destructive optical characterization to allow faster feedback and further device processing. With this work, we show that different NW array and substrate spectral behaviors with delay time and excitation power can be used to determine which part of the sample dominates the detected spectrum. Here, we evaluate TRPL characterization of dense periodic as-grown GaAs NW arrays on a p-type GaAs substrate, including a sample with uncapped GaAs NWs and several samples passivated with AlGaAs radial shell of varied composition and thickness. We observe a strong spectral overlap of substrate and NW signals and find that the NWs can absorb part of the substrate luminescence signal, thus resulting in a modified substrate signal. The level of absorption depends on the NW-array geometry, making a deconvolution of the NW signal very difficult. By studying TRPL of substrate-only and as-grown NWs at 770 and 400 nm excitation wavelengths, we find a difference in spectral behavior with delay time and excitation power that can be used to assess whether the signal is dominated by the NWs. We find that the NW signal dominates with 400 nm excitation wavelength, where we observe two different types of excitation power dependence for the NWs capped with high and low Al composition shells. Finally, from the excitation power dependence of the peak TRPL signal, we extract an estimate of background carrier concentration in the NWs.
|
|
| 4. |
|
|
| 5. |
- Heurlin, Magnus, et al.
(författare)
-
In Situ Characterization of Nanowire Dimensions and Growth Dynamics by Optical Reflectance
- 2015
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 15:5, s. 3597-3602
-
Tidskriftsartikel (refereegranskat)abstract
- Optical reflectometry is commonly used as an accurate and noninvasive characterization tool when growing planar semiconductor layers. However, thin-film analysis schemes cannot be directly applied to nanowire systems due to their complex optical response. Here, we report on reliable in situ characterization of nanowire growth with high accuracy using optical reflectance spectra for analysis. The method makes it possible to determine the nano-wire length, diameter, and growth rate in situ in real time with high resolution. We demonstrate the method's versatility by using the optical reflectance data for determining nanowire dimensions on both particle-assisted and selective-area grown nanowires. To indicate the full potential of in situ characterization of nanowire synthesis we evaluate the growth dynamics of InP nanowires in the presence of the p-type dopant precursor diethylzinc. We observe that the growth rate is strongly affected by the diethylzinc. At low diethylzinc flows, the growth rate decreases monotonously while higher flows lead to an initially increasing growth rate. From these in situ characterization data, we conclude that the surface migration length of adatom species is affected strongly by the addition of diethylzinc. We believe that this characterization method will become a standard tool for in situ growth monitoring and aid in elucidating the complex growth dynamics often exhibited during nanowire growth.
|
|
| 6. |
- Heurlin, Magnus, et al.
(författare)
-
Structural Properties of Wurtzite InP-InGaAs Nanowire Core-Shell Heterostructures
- 2015
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 15:4, s. 2462-2467
-
Tidskriftsartikel (refereegranskat)abstract
- We report on growth and characterization of wurtzite InP-In1-xGaxAs core-shell nanowire heterostructures. A range of nanowire structures with different Ga concentration in the shell was characterized with transmission electron microscopy and X-ray diffraction. We found that the main part of the nanowires has a pure wurtzite crystal structure, with occasional stacking faults occurring only at the top and bottom. This allowed us to determine the structural properties of wurtzite In1-xGaxAs. The InP-In1-xGaxAs core-shell nanowires show a triangular and hexagonal facet structure of {1100} and {10 (10) over bar} planes. X-ray diffraction measurements showed that the core and the shell are pseudomorphic along the c-axis, and the strained axial lattice constant is closer to the relaxed In1-xGaxAs shell. Microphotoluminescence measurements of the nanowires show emission in the infrared regime, which makes them suitable for applications in optical communication.
|
|
| 7. |
- Jafari Jam, Reza, et al.
(författare)
-
III-V nanowire synthesis by use of electrodeposited gold particles
- 2015
-
Ingår i: Nano letters (Print). - Washington, DC : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:1, s. 134-138
-
Tidskriftsartikel (refereegranskat)abstract
- Semiconductor nanowires are great candidates for building novel electronic devices. Considering the cost of fabricating such devices, substrate reuse and gold consumption are the main concerns. Here we report on implementation of high throughput gold electrodeposition for selective deposition of metal seed particles in arrays defined by lithography for nanowire synthesis. By use of this method, a reduction in gold consumption by a factor of at least 300 was achieved, as compared to conventional thermal evaporation for the same pattern. Because this method also facilitates substrate reuse, a significantly reduced cost of the final device is expected. We investigate the morphology, crystallography, and optical properties of InP and GaAs nanowires grown from electrodeposited gold seed particles and compare them with the properties of nanowires grown from seed particles defined by thermal evaporation of gold. We find that nanowire synthesis, as well as the material properties of the grown nanowires are comparable and quite independent of the gold deposition technique. On the basis of these results, electrodeposition is proposed as a key technology for large-scale fabrication of nanowire-based devices.
|
|
| 8. |
- Jain, Vishal, et al.
(författare)
-
Bias-dependent spectral tuning in InP nanowire-based photodetectors
- 2017
-
Ingår i: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:11
-
Tidskriftsartikel (refereegranskat)abstract
- Nanowire array ensembles contacted in a vertical geometry are extensively studied and considered strong candidates for next generations of industrial scale optoelectronics. Key challenges in this development deal with optimization of the doping profile of the nanowires and the interface between nanowires and transparent top contact. Here we report on photodetection characteristics associated with doping profile variations in InP nanowire array photodetectors. Bias-dependent tuning of the spectral shape of the responsivity is observed which is attributed to a Schottky-like contact at the nanowire-ITO interface. Angular dependent responsivity measurements, compared with simulated absorption spectra, support this conclusion. Furthermore, electrical simulations unravel the role of possible self-gating effects in the nanowires induced by the ITO/SiO x wrap-gate geometry. Finally, we discuss possible reasons for the observed low saturation current at large forward biases.
|
|
| 9. |
- Jain, Vishal, et al.
(författare)
-
InP/InAsP Nanowire-Based Spatially Separate Absorption and Multiplication Avalanche Photodetectors
- 2017
-
Ingår i: ACS Photonics. - Washington : American Chemical Society (ACS). - 2330-4022. ; 4:11, s. 2693-2698
-
Tidskriftsartikel (refereegranskat)abstract
- Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication region is implemented in a large band gap material is desired to avoid detrimental Zener tunneling leakage currents, a concern otherwise in smaller band gap materials required for absorption at 1.3/1.55 μm. Self-assembled III-V semiconductor nanowires offer key advantages such as enhanced absorption due to optical resonance effects, strain-relaxed heterostructures, and compatibility with mainstream silicon technology. Here, we present electrical and optical characteristics of single InP and InP/InAsP nanowire APD structures. Temperature-dependent breakdown characteristics of p+-n-n+ InP nanowire devices were investigated first. A clear trap-induced shift in breakdown voltage was inferred from I-V measurements. An improved contact formation to the p+-InP segment was observed upon annealing, and its effect on breakdown characteristics was investigated. The band gap in the absorption region was subsequently varied from pure InP to InAsP to realize spatially separate absorption and multiplication APDs in heterostructure nanowires. In contrast to the homojunction APDs, no trap-induced shifts were observed for the heterostructure APDs. A gain of 12 was demonstrated for selective optical excitation of the InAsP segment. Additional electron-beam-induced current measurements were carried out to investigate the effect of local excitation along the nanowire on the I-V characteristics. Simulated band profiles and electric field distributions support our interpretation of the experiments. Our results provide important insight for optimization of avalanche photodetector devices based on III-V nanowires.
|
|
| 10. |
|
|
