| 1. |
- Abate, E., et al.
(författare)
-
Combined performance tests before installation of the ATLAS Semiconductor and Transition Radiation Tracking Detectors
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS (A Toroidal LHC ApparatuS) Inner Detector provides charged particle tracking in the centre of the ATLAS experiment at the Large Hadron Collider (LHC). The Inner Detector consists of three subdetectors: the Pixel Detector, the Semiconductor Tracker (SCT), and the Transition Radiation Tracker (TRT). This paper summarizes the tests that were carried out at the final stage of SCT+TRT integration prior to their installation in ATLAS. The combined operation and performance of the SCT and TRT barrel and endcap detectors was investigated through a series of noise tests, and by recording the tracks of cosmic rays. This was a crucial test of hardware and software of the combined tracker detector systems. The results of noise and cross-talk tests on the SCT and TRT in their final assembled configuration, using final readout and supply hardware and software, are reported. The reconstruction and analysis of the recorded cosmic tracks allowed testing of the offline analysis chain and verification of basic tracker performance parameters, such as efficiency and spatial resolution, in combined operation before installation.
|
|
| 2. |
- Abdesselam, A., et al.
(författare)
-
Engineering for the ATLAS SemiConductor Tracker (SCT) end-cap
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221 .- 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS SemiConductor Tracker (SCT) is a silicon-strip tracking detector which forms part of the ATLAS inner detector. The SCT is designed to track charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC) at CERN at an energy of 14 TeV. The tracker is made up of a central barrel and two identical end-caps. The barrel contains 2112 silicon modules, while each end-cap contains 988 modules. The overall tracking performance depends not only on the intrinsic measurement precision of the modules but also on the characteristics of the whole assembly, in particular, the stability and the total material budget. This paper describes the engineering design and construction of the SCT end-caps, which are required to support mechanically the silicon modules, supply services to them and provide a suitable environment within the inner detector. Critical engineering choices are highlighted and innovative solutions are presented - these will be of interest to other builders of large-scale tracking detectors. The SCT end-caps will be fully connected at the start of 2008. Further commissioning will continue, to be ready for proton-proton collision data in 2008.
|
|
| 3. |
- Abdesselam, A., et al.
(författare)
-
The detector control system of the ATLAS SemiConductor Tracker during macro-assembly and integration
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3, s. P02007-
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS SemiConductor Tracker (SCT) is one of the largest existing semiconductor detectors. It is situated between the Pixel detector and the Transition Radiation Tracker at one of the four interaction points of the Large Hadron Collider (LHC). During 2006-2007 the detector was lowered into the ATLAS cavern and installed in its final position. For the assembly, integration and commissioning phase, a complete Detector Control System (DCS) was developed to ensure the safe operation of the tracker. This included control of the individual powering of the silicon modules, a bi-phase cooling system and various types of sensors monitoring the SCT environment and the surrounding test enclosure. The DCS software architecture, performance and operational experience will be presented in the view of a validation of the DCS for the final SCT installation and operation phase.
|
|
| 4. |
|
|
| 5. |
- Lumbreras, B., et al.
(författare)
-
Meat intake and bladder cancer in a prospective study: a role for heterocyclic aromatic amines?
- 2008
-
Ingår i: Cancer Causes and Control. - : Springer Science and Business Media LLC. - 1573-7225 .- 0957-5243. ; 19:6, s. 649-656
-
Tidskriftsartikel (refereegranskat)abstract
- Objective The suspect carcinogens, heterocyclic amines (HAAs), found in well-done meat require host-mediated metabolic activation before inducing DNA mutations. The role of SULT1A1 and of NAT2 on the activation of HAAs suggests that NAT2 rapid acetylator genotype and SULT1A1 allele variants can have an effect on HAA carcinogenicity. Methods Data were collected as part of a case-control study nested within the EPIC cohort, the Gen Air investigation. EPIC is a prospective study designed to investigate the relationship between nutrition and cancer. Information was collected through a non-dietary questionnaire on lifestyle variables and through a dietary questionnaire. The subjects were restricted to non-smokers. We calculated the matched odds ratio for bladder cancer risk using logistic regression, controlling for potential confounders. Results There were 227 bladder cases and 612 controls matched 1:3. Meat intake and NAT2 genotype were not independently associated with bladder cancer risk. A significant relationship was observed between bladder cancer risk and consumption of meat only among subjects with the rapid NAT2 genotype (odds ratios [OR] 2.9, 95% CI 1.0-7.9 for the 2nd quartile of meat intake; 3.6, 95% CI 1.3-9.7 for the 3rd quartile; and 3.5, 95% CI 1.2-9.7 for the 4th quartile), and was not present among subjects with the slow genotype. An interaction between NAT2 and meat intake was found in logistic regression (P = 0.034). No association was observed for SULT1A *1/2 genotype (1.0; 95% CI 0.7-1.5) and for SULT1A1 *2/2 genotype (0.9; 95% CI 0.5-1.7). Conclusions These results are suggestive of a role of meat intake and NAT2 on bladder cancer risk. They support the hypothesis that among subjects with the rapid NAT2 acetylation genotype higher levels of HAAs exposure are a bladder cancer risk factor. We did not observe an effect of SULT1A1 allele variants on this cancer. The present study adds new information on the possible long-term adverse effects of diets with high meat intake.
|
|
| 6. |
- Allen, N. E., et al.
(författare)
-
Animal foods, protein, calcium and prostate cancer risk: the European Prospective Investigation into Cancer and Nutrition
- 2008
-
Ingår i: British Journal of Cancer. - : Springer Science and Business Media LLC. - 1532-1827 .- 0007-0920. ; 98:9, s. 1574-1581
-
Tidskriftsartikel (refereegranskat)abstract
- We examined consumption of animal foods, protein and calcium in relation to risk of prostate cancer among 142 251 men in the European Prospective Investigation into Cancer and Nutrition. Associations were examined using Cox regression, stratified by recruitment centre and adjusted for height, weight, education, marital status and energy intake. After an average of 8.7 years of follow-up, there were 2727 incident cases of prostate cancer, of which 1131 were known to be localised and 541 advanced-stage disease. A high intake of dairy protein was associated with an increased risk, with a hazard ratio for the top versus the bottom fifth of intake of 1.22 (95% confidence interval (CI): 1.07-1.41, P-trend = 0.02). After calibration to allow for measurement error, we estimated that a 35-g day(-1) increase in consumption of dairy protein was associated with an increase in the risk of prostate cancer of 32% (95% CI: 1-72%, P-trend = 0.04). Calcium from dairy products was also positively associated with risk, but not calcium from other foods. The results support the hypothesis that a high intake of protein or calcium from dairy products may increase the risk for prostate cancer.
|
|
| 7. |
- Pischon, T., et al.
(författare)
-
General and Abdominal Adiposity and Risk of Death in Europe
- 2008
-
Ingår i: New England Journal of Medicine. - 0028-4793. ; 359:20, s. 2105-2120
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND Previous studies have relied predominantly on the body-mass index (BMI, the weight in kilograms divided by the square of the height in meters) to assess the association of adiposity with the risk of death, but few have examined whether the distribution of body fat contributes to the prediction of death. METHODS We examined the association of BMI, waist circumference, and waist-to-hip ratio with the risk of death among 359,387 participants from nine countries in the European Prospective Investigation into Cancer and Nutrition (EPIC). We used a Cox regression analysis, with age as the time variable, and stratified the models according to study center and age at recruitment, with further adjustment for educational level, smoking status, alcohol consumption, physical activity, and height. RESULTS During a mean follow-up of 9.7 years, 14,723 participants died. The lowest risks of death related to BMI were observed at a BMI of 25.3 for men and 24.3 for women. After adjustment for BMI, waist circumference and waist-to-hip ratio were strongly associated with the risk of death. Relative risks among men and women in the highest quintile of waist circumference were 2.05 (95% confidence interval [CI], 1.80 to 2.33) and 1.78 (95% CI, 1.56 to 2.04), respectively, and in the highest quintile of waist-to-hip ratio, the relative risks were 1.68 (95% CI, 1.53 to 1.84) and 1.51 (95% CI, 1.37 to 1.66), respectively. BMI remained significantly associated with the risk of death in models that included waist circumference or waist-to-hip ratio (P<0.001). CONCLUSIONS These data suggest that both general adiposity and abdominal adiposity are associated with the risk of death and support the use of waist circumference or waist-tohip ratio in addition to BMI in assessing the risk of death.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Anelli, A., et al.
(författare)
-
Measurement and simulation of the neutron response and detection efficiency of a Pb-scintillating fiber calorimeter
- 2008
-
Ingår i: IEEE Transactions on Nuclear Science. - 0018-9499 .- 1558-1578. ; 55:3, s. 1409-1412
-
Tidskriftsartikel (refereegranskat)abstract
- We have measured the overall detection efficiency to neutrons of a small prototype of the KLOE Pb-scintillating fiber calorimeter in the kinetic energy range [5,175] MeV. using the neutron beam facility of The Svedberg Laboratory, TSL, Uppsala. The measurement of the neutron detection efficiency of a NE110 scintillator provided a reference calibration. At the lowest trigger threshold, the overall calorimeter efficiency ranges from 28% to 33%. This value largely exceeds the estimated similar to 8% expected if the response were proportional only to the scintillator equivalent thickness. A detailed simulation of the calorimeter and of the TSL beamline has been performed with the FLUKA Monte Carlo code. The simulated response of the detector to neutrons is presented together with first data to Monte Carlo comparison. The results show an overall neutron efficiency of about 35%. The reasons for such an efficiency enhancement, in comparison with the typical scintillator-based neutron counters, are explained, opening the road to a novel neutron detector.
|
|
