| 1. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 2. |
- Martz, Dale, et al.
(författare)
-
Large area high efficiency broad bandwidth 800 nm dielectric gratings for high energy laser pulse compression
- 2009
-
Ingår i: Optics Express. - : Optical Society of America. - 1094-4087. ; 17:26, s. 23809-23816
-
Tidskriftsartikel (refereegranskat)abstract
- We have demonstrated broad bandwidth large area (229 mm x 114 mm) multilayer dielectric diffraction gratings for the efficient compression of high energy 800 nm laser pulses at high average power. The gratings are etched in the top layers of an aperiodic (Nb0.5Ta0.5)2O5-SiO2 multilayer coating deposited by ion beam sputtering. The mean efficiency of the grating across the area is better than 97% at the center wavelength and remains above 96% at wavelengths between 820 nm and 780 nm. The gratings were used to compress 5.5 J pulses from a Ti:sapphire laser with an efficiency above 80 percent.
|
|
| 3. |
- Menoni, C. S., et al.
(författare)
-
Nanometer-scale imaging and ablation with Extreme Ultraviolet lasers
- 2007
-
Ingår i: 2007 CONFERENCE ON LASERS & ELECTRO-OPTICS/QUANTUM ELECTRONICS AND LASER SCIENCE CONFERENCE (CLEO/QELS 2007), VOLS 1-5. - 9781424435906 ; , s. 1401-1402
-
Konferensbidrag (refereegranskat)abstract
- The short wavelength and high brightness of compact extreme ultraviolet lasers is shown to enable the development of microscopes with spatial resolution of tens of nanometers and new types of nanoprobes.
|
|
| 4. |
- Menoni, C. S., et al.
(författare)
-
Nanoscale resolution microscopy and ablation with extreme ultraviolet lasers
- 2007
-
Ingår i: 2007 IEEE LEOS ANNUAL MEETING CONFERENCE PROCEEDINGS, VOLS 1 AND 2. - 9781424409242 ; , s. 488-489
-
Konferensbidrag (refereegranskat)abstract
- We obtain a spatial resolution down to 38 run with full field imaging and laser-ablation systems that exploit the short wavelength and high brightness output from compact extreme ultraviolet lasers in combination with zone plate optics.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Rocca, J. J., et al.
(författare)
-
Compact Soft X-ray Lasers for Imaging, Material Processing, and Characterization at the Nanoscale
- 2007
-
Ingår i: 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. - 9781424413355 ; , s. 72-73
-
Konferensbidrag (refereegranskat)abstract
- As manufacturing of devices advances into the nanoscale, critical feature sizes have rapidly shrunk to below the wavelength of visible light. These advances in nanotechnology have created a need to develop better ways of accessing the nanoworld. The extreme ultraviolet (EUV)/ soft x-ray (SXR) region of the spectrum provides an opportunity to use coherent light at wavelengths that are 10- to 100-times shorter than visible light, at 1 to 100 nm. Given the diffraction limit in imaging resolution, these wavelengths allow us to "see" smaller features and "write" smaller patterns than would be possible with visible light. We have developed compact laser-pumped and discharge-pumped lasers operating at wavelengths of λ=13.2 nm [1] and λ=46.9 nm [2] respectively, and have used them in the demonstration of nanoscale full field imaging [3,4], nanopatterning [5], and nanoscale laser ablation [6]. The high brightness and short wavelength output from these lasers when combined with specialized EUV/SXR optics, offer unique opportunities for the implementation of table-top imaging, patterning and metrology tools with superior spatial resolution for applications in nanoscience and nanotechnology. Using these new compact short wavelength lasers we have built two microscopes, using λ=46.9 nm or λ=l 3.2 nm laser illumination. The compact λ=46.9 nm microscope (Fig. 1a and lb) condenses the light using a multilayer coated Schwarzschild mirror, and images the test object using a diffractive zone plate lens. The spatial resolution of this microscopes was assessed by imaging test samples consisting of dense line gratings of half-periods ranging from 200 down to 35 nm. Figure 2(a) and (b) show images of a 100 nm and 70 nm half-period gratings obtained with the λ =46.9 nm microscope. The lineout in the image of the 70 nm lines shows a modulation of ∼30% indicating that the features are fully resolved according to the Rayleigh criterion. By rearranging the optics, the λ=46.9 nm microscope can also image surfaces. An image of fully resolved dense metal lines, with half-period of 170 nm, patterned on the silicon wafer is shown in Figure 2 (c). The shorter wavelength λ= 3.2 nm microscope uses all zone plate optics to render images of transmissive test patterns with increased spatial resolution . An image of fully resolved 50 nm half-period dense lines acquired with a 20 seconds exposure is shown in Figure 2(d). From images like this one, the spatial resolution of the λ=13.2 nm table-top microscope was determined to be better than 38 nm [3]. The high coherence of these short wavelength lasers also allows for the printing of arrays of nanoscale features using interferometric lithography. We have demonstrated combined a λ=46.9 nm capillary discharge laser and a Lloyd's mirror to print arrays of cone-shaped nano-dots with ∼ 58 nm FWHM diameter (Fig 3a) [5]. The same arrangement was used to print arrays of nano-holes 120 nm FWHM and 100 nm in depth over areas in excess of 500 × 500 μm2 in different photoresists using exposure times as short as 80 s. Larger area patterns can be readily printed using precision translation stages and multiple exposures by overlay superposition. The ability to focus SXL laser light into near diffraction-limited spots also opens the possibility to develop new types of nanoprobes. We have demonstrated ablation of sub-100 nm diameter holes by directly focusing the output of a λ=46.9 nm laser onto a sample with a zone plate lens. Figure 3(b) shows an AFM image of a 82 nm diameter crater obtained ablating a 500 nm thick PMMA layer with a single laser shot. The holes were observed to have very clean walls and high reproducibility. We have recently added the capability to spectroscopically analyze the light emitted from the plasma created during the ablation, opening the possibility to develop analytic nanoprobles. All of these results illustrate the capabilities of compact short wavelength lasers for nanotechnology applications.
|
|
| 8. |
- Rocca, J. J., et al.
(författare)
-
High brightness table-top soft x-ray lasers at high repetition rate : injection-seeding of solid target plasma amplifiers and other developments - art. no. 670202
- 2007
-
Ingår i: SOFT X-RAY LASERS AND APPLICATIONS VII. - : SPIE. ; , s. 70202-70202
-
Konferensbidrag (refereegranskat)abstract
- We have recently demonstrated high repetition rate tabletop lasers operating at wavelengths as short as 10.9 rim based on collisional transient excitation of ions in plasmas created by laser heating of solid targets. As a further step in the development of these lasers into very high brightness and fully coherent soft x-ray sources, we have demonstrated injection seeding of the amplifiers with high harmonic seed pulses. We report results of an experiment in which a 32.6 rim Ne-like Ti amplifier was used to amplify a seed pulse from the 25(th) harmonic of Ti:Sapphire into the gain saturation regime. Simultaneous amplification of the 27(th) harmonic at 30.1 nm was also observed. The seeded soft x-ray laser beam was measured to approach full spatial coherence. We have demonstrated that this scheme is scalable to shorter wavelengths and that is capable of producing extremely bright soft x-ray laser pulse with essentially full coherence.
|
|
