1.
Alhalaweh, Amjad, et al.
(författare)
Physical stability of drugs after storage above and below the glass transition temperature : Relationship to glass-forming ability
2015
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 495:1, s. 312-317
Tidskriftsartikel (refereegranskat) abstract
Amorphous materials are inherently unstable and tend to crystallize upon storage. In this study, we investigated the extent to which the physical stability and inherent crystallization tendency of drugs are related to their glass-forming ability (GFA), the glass transition temperature (T-g) and thermodynamic factors. Differential scanning calorimetry was used to produce the amorphous state of 52 drugs [ 18 compounds crystallized upon heating (Class II) and 34 remained in the amorphous state (Class III)] and to perform in situ storage for the amorphous material for 12 h at temperatures 20 degrees C above or below the T-g. A computational model based on the support vector machine (SVM) algorithm was developed to predict the structure-property relationships. All drugs maintained their Class when stored at 20 degrees C below the T-g. Fourteen of the Class II compounds crystallized when stored above the T-g whereas all except one of the Class III compounds remained amorphous. These results were only related to the glass-forming ability and no relationship to e. g. thermodynamic factors was found. The experimental data were used for computational modeling and a classification model was developed that correctly predicted the physical stability above the T-g. The use of a large dataset revealed that molecular features related to aromaticity and pi-pi interactions reduce the inherent physical stability of amorphous drugs.
2.
Berg, Staffan, et al.
(författare)
Evaluation in pig of an intestinal administration device for oral peptide delivery
2023
Ingår i: Journal of Controlled Release. - : Elsevier. - 0168-3659 .- 1873-4995. ; 353, s. 792-801
Tidskriftsartikel (refereegranskat) abstract
The bioavailability of peptides co-delivered with permeation enhancers following oral administration remains low and highly variable. Two factors that may contribute to this are the dilution of the permeation enhancer in the intestinal fluid, as well as spreading of the released permeation enhancer and peptide in the lumen by intestinal motility. In this work we evaluated an Intestinal Administration Device (IAD) designed to reduce the luminal dilution of drug and permeation enhancer, and to minimize movement of the dosage form in the intestinal lumen. To achieve this, the IAD utilizes an expanding design that holds immediate release mini tablets and places these in contact with the intestinal epithelium, where unidirectional drug release can occur. The expanding conformation limits movement of the IAD in the intestinal tract, thereby enabling drug release at a single focal point in the intestine. A pig model was selected to study the ability of the IAD to promote intestinal absorption of the peptide MEDI7219 formulated together with the permeation enhancer sodium caprate. We compared the IAD to intestinally administered enteric coated capsules and an intestinally administered solution. The IAD restricted movement of the immediate release tablets in the small intestine and histological evaluation of the mucosa indicated that high concentrations of sodium caprate were achieved. Despite significant effect of the permeation enhancer on the integrity of the intestinal epithelium, the bioavailability of MEDI7219 was of the same order of magnitude as that achieved with the solution and enteric coated capsule formulations (2.5–3.8%). The variability in plasma concentrations of MEDI7219 were however lower when delivered using the IAD as compared to the solution and enteric coated capsule formulations. This suggests that dosage forms that can limit intestinal dilution and control the position of drug release can be a way to reduce the absorptive variability of peptides delivered with permeation enhancers but do not offer significant benefits in terms of increasing bioavailability.
3.
Emeh, Prosper, et al.
(författare)
Experiences and Translatability of In Vitro and In Vivo Models to Evaluate Caprate as a Permeation Enhancer
2024
Ingår i: Molecular Pharmaceutics. - : American Chemical Society (ACS). - 1543-8384 .- 1543-8392. ; 21:1, s. 313-324
Tidskriftsartikel (refereegranskat) abstract
Transient permeation enhancers (PEs) have been widely used to improve the oral absorption of macromolecules. During pharmaceutical development, the correct selection of the macromolecule, PE, and the combination needs to be made to maximize oral bioavailability and ensure successful clinical development. Various in vitro and in vivo methods have been investigated to optimize this selection. In vitro methods are generally preferred by the pharmaceutical industry to reduce the use of animals according to the "replacement, reduction, and refinement" principle commonly termed "3Rs," and in vitro methods typically have a higher throughput. This paper compares two in vitro methods that are commonly used within the pharmaceutical industry, being Caco-2 and an Ussing chamber, to two in vivo models, being in situ intestinal instillation to rats and in vivo administration via an endoscope to pigs. All studies use solution formulation of sodium caprate, which has been widely used as a PE, and two macromolecules, being FITC-dextran 4000 Da and MEDI7219, a GLP-1 receptor agonist peptide. The paper shares our experiences of using these models and the challenges with the in vitro models in mimicking the processes occurring in vivo. The paper highlights the need to consider these differences when translating data generated using these in vitro models for evaluating macromolecules, PE, and combinations thereof for enabling oral delivery.
4.
Sou, Tomás, et al.
(författare)
Model-Based Drug Development in Pulmonary Delivery : Pharmacokinetic Analysis of Novel Drug Candidates for Treatment of Pseudomonas aeruginosa Lung Infection
2019
Ingår i: Journal of Pharmaceutical Sciences. - : Elsevier BV. - 0022-3549 .- 1520-6017. ; 108:1, s. 630-640
Tidskriftsartikel (refereegranskat) abstract
Antibiotic resistance is a major public health threat worldwide. In particular, about 80% of cystic fibrosis patients have chronic Pseudomonas aeruginosa (PA) lung infection resistant to many current antibiotics. We are therefore developing a novel class of antivirulence agents, quorum sensing inhibitors (QSIs), which inhibit biofilm formation and sensitize PA to antibiotic treatments. For respiratory conditions, targeted delivery to the lung could achieve higher local concentrations with reduced risk of adverse systemic events. In this study, we report the pharmacokinetics of 3 prototype QSIs after pulmonary delivery, and the simultaneous analysis of the drug concentration-time profiles from bronchoalveolar lavage, lung homogenate and plasma samples, using a pharmacometric modeling approach. In addition to facilitating the direct comparison and selection of drug candidates, the developed model was used for dosing simulation studies to predict in vivo exposure following different dosing scenarios. The results show that systemic clearance has limited impact on local drug exposure in the lung after pulmonary delivery. Therefore, we suggest that novel QSIs designed for pulmonary delivery as targeted treatments for respiratory conditions should ideally have a long residence time in the lung for local efficacy with rapid clearance after systemic absorption for reduced risk of systemic adverse events.
5.
Alhalaweh, Amjad, et al.
(författare)
Compromised in vitro dissolution and membrane transport of multidrug amorphous formulations.
2016
Ingår i: Journal of Controlled Release. - : Elsevier BV. - 0168-3659 .- 1873-4995. ; 229, s. 172-182
Tidskriftsartikel (refereegranskat) abstract
Herein, the thermodynamic properties of solutions evolving from the non-sink dissolution of amorphous solid dispersions (ASDs) containing two or more drugs have been evaluated, focusing on the maximum achievable supersaturation and tendency of the system to undergo liquid-liquid phase separation (LLPS). Ritonavir (RTV) and atazanavir (ATV) were co-formulated with polyvinylpyrrolidone to produce ASDs with different molar ratios of each drug, and the dissolution profile of each drug was studied under non-sink conditions. The phase behavior of the supersaturated solutions generated by ASD dissolution was compared to that of supersaturated solutions generated by antisolvent addition. Dissolution of an ASD containing RTV, ATV and lopinavir (LPV) was also investigated. A thermodynamic model was used to predict the maximum achievable supersaturation for ASDs containing two and three drugs. In addition, a transport study with Caco-2 cells was conducted to evaluate the impact of co-addition of drugs on membrane transport. It was found that the formulation containing a 1:1 molar ratio of RTV and ATV achieved only 50% of the supersaturation attained by dissolution of the single drug systems. The maximum achievable concentration of ATV decreased linearly as the mole fraction of ATV in the formulation decreased and a similar trend was observed for RTV. For the dispersion containing a 1:1:1 molar ratio of RTV, ATV and LPV, the maximum concentration of each drug was only one third of that achieved for the single drug formulations. The decrease in the achievable supersaturation was well-predicted by the thermodynamic model for both the binary and ternary drug combinations. These observations can be explained by a decrease in the concentration at which the drugs undergo LLPS in the presence of other miscible drugs, thereby reducing the maximum achievable supersaturation of each drug. The reduced free drug concentration was reflected by a decreased flux across Caco-2 cells for the drug combinations compared to drug alone. This study sheds light on the complex dissolution and solution phase behavior of multicomponent amorphous dosage forms, in particular those containing poorly water soluble drugs, which may undergo supersaturation in vivo.
6.
Alhalaweh, Amjad, et al.
(författare)
Computational predictions of glass-forming ability and crystallization tendency of drug molecules
2014
Ingår i: Molecular Pharmaceutics. - : American Chemical Society (ACS). - 1543-8384 .- 1543-8392. ; 11:9, s. 3123-3132
Tidskriftsartikel (refereegranskat) abstract
Amorphization is an attractive formulation technique for drugs suffering from poor aqueous solubility as a result of their high lattice energy. Computational models that can predict the material properties associated with amorphization, such as glass-forming ability (GFA) and crystallization behavior in the dry state, would be a time-saving, cost-effective, and material-sparing approach compared to traditional experimental procedures. This article presents predictive models of these properties developed using support vector machine (SVM) algorithm. The GFA and crystallization tendency were investigated by melt-quenching 131 drug molecules in situ using differential scanning calorimetry. The SVM algorithm was used to develop computational models based on calculated molecular descriptors. The analyses confirmed the previously suggested cutoff molecular weight (MW) of 300 for glass-formers, and also clarified the extent to which MW can be used to predict the GFA of compounds with MW < 300. The topological equivalent of Grav3_3D, which is related to molecular size and shape, was a better descriptor than MW for GFA; it was able to accurately predict 86% of the data set regardless of MW. The potential for crystallization was predicted using molecular descriptors reflecting Hückel pi atomic charges and the number of hydrogen bond acceptors. The models developed could be used in the early drug development stage to indicate whether amorphization would be a suitable formulation strategy for improving the dissolution and/or apparent solubility of poorly soluble compounds.
7.
Alhalaweh, Amjad, et al.
(författare)
Molecular Drivers of Crystallization Kinetics for Drugs in Supersaturated Aqueous Solutions
2019
Ingår i: Journal of Pharmaceutical Sciences. - : ELSEVIER SCIENCE INC. - 0022-3549 .- 1520-6017. ; 108:1, s. 252-259
Tidskriftsartikel (refereegranskat) abstract
In this study, we explore molecular properties of importance in solution-mediated crystallization occurring in supersaturated aqueous drug solutions. Furthermore, we contrast the identified molecular properties with those of importance for crystallization occurring in the solid state. A literature data set of 54 structurally diverse compounds, for which crystallization kinetics from supersaturated aqueous solutions and in melt-quenched solids were reported, was used to identify molecular drivers for crystallization kinetics observed in solution and contrast these to those observed for solids. The compounds were divided into fast, moderate, and slow crystallizers, and in silico classification was developed using a molecular K-nearest neighbor model. The topological equivalent of Grav3 (related to molecular size and shape) was identified as the most important molecular descriptor for solution crystallization kinetics; the larger this descriptor, the slower the crystallization. Two electrotopological descriptors (the atom-type E-state index for -Caa groups and the sum of absolute values of pi Fukui(+) indices on C) were found to separate the moderate and slow crystallizers in the solution. The larger these descriptors, the slower the crystallization. With these 3 descriptors, the computational model correctly sorted the crystallization tendencies from solutions with an overall classification accuracy of 77% (test set).
8.
Alskär, Linda C., et al.
(författare)
Effect of lipids on absorption of carvedilol in dogs : Is coadministration of lipids as efficient as a lipid-based formulation?
2019
Ingår i: Journal of Controlled Release. - : Elsevier BV. - 0168-3659 .- 1873-4995. ; 304, s. 90-100
Tidskriftsartikel (refereegranskat) abstract
Lipid-based formulations (LBFs) is a formulation strategy for enabling oral delivery of poorly water-soluble drugs. However, current use of this strategy is limited to a few percent of the marketed products. Reasons for that are linked to the complexity of LBFs, chemical instability of pre-dissolved drug and a limited understanding of the influence of LBF intestinal digestion on drug absorption. The aim of this study was to explore intestinal drug solubilization from a long-chain LBF, and evaluate whether coadministration of LBF is as efficient as a lipidbased drug formulation containing the pre-dissolved model drug carvedilol. Thus, solubility studies of this weak base were performed in simulated intestinal fluid (SIF) and aspirated dog intestinal fluid (DIF). DIF was collected from duodenal stomas after dosing of water and two levels (1 g and 2 g) of LBF. Similarly, the in vitro SIF solubility studies were conducted prior to, and after addition of, undigested or digested LBF. The DIF fluid was further characterized for lipid digestion products (free fatty acids) and bile salts. Subsequently, carvedilol was orally administered to dogs in a lipid-based drug formulation and coadministered with LBF, and drug plasma exposure was assessed. In addition to these studies, in vitro drug absorption from the different formulation approaches were evaluated in a lipolysis-permeation device, and the obtained data was used to evaluate the in vitro in vivo correlation. The results showed elevated concentrations of free fatty acids and bile salts in the DIF when 2 g of LBF was administered, compared to only water. As expected, the SIF and DIF solubility data revealed that carvedilol solubilization increased by the presence of lipids and lipid digestion products. Moreover, coadministration of LBF and drug demonstrated equal plasma exposure to the lipid-based drug formulation. Furthermore, evaluation of in vitro absorption resulted in the same rank order for the LBFs as in the in vivo dog study. In conclusion, this study demonstrated increased intestinal solubilization from a small amount of LBF, caused by lipid digestion products and bile secretion. The outcomes also support the use of coadministration of LBF as a potential dosing regimen in cases where it is beneficial to have the drug in the solid form, e.g. due to chemical instability in the lipid vehicle. LBFs.
9.
Alskär, Linda C., et al.
(författare)
Impact of Drug Physicochemical Properties on Lipolysis-Triggered Drug Supersaturation and Precipitation from Lipid-Based Formulations
2018
Ingår i: Molecular Pharmaceutics. - : American Chemical Society (ACS). - 1543-8384 .- 1543-8392. ; 15:10, s. 4733-4744
Tidskriftsartikel (refereegranskat) abstract
In this study we investigated lipolysis-triggered supersaturation and precipitation of a set of model compounds formulated in lipid-based formulations (LBFs). The purpose was to explore the relationship between precipitated solid form and inherent physicochemical properties of the drug. Eight drugs were studied after formulation in three LBFs, representing lipid-rich (extensively digestible) to surfactant-rich (less digestible) formulations. In vitro lipolysis of drug-loaded LBFs were conducted, and the amount of dissolved and precipitated drug was quantified. Solid form of the precipitated drug was characterized with polarized light microscopy (PLM) and Raman spectroscopy. A significant solubility increase for the weak bases in the presence of digestion products was observed, in contrast to the neutral and acidic compounds for which the solubility decreased. The fold-increase in solubility was linked to the degree of ionization of the weak bases and thus their attraction to free fatty acids. A high level of supersaturation was needed to cause precipitation. For the weak bases, the dose number indicated that precipitation would not occur during lipolysis; hence, these compounds were not included in further studies. The solid state analysis proved that danazol and griseofulvin precipitated in a crystalline form, while niclosamide precipitated as a hydrate. Felodipine and indomethacin crystals were visible in the PLM, whereas the Raman spectra showed presence of amorphous drug, indicating amorphous precipitation that quickly crystallized. The solid state analysis was combined with literature data to allow analysis of the relationship between solid form and the physicochemical properties of the drug. It was found that low molecular weight and high melting temperature increases the probability of crystalline precipitation, whereas precipitation in an amorphous form was favored by high molecular weight, low melting temperature, and positive charge.
10.
Alskär, Linda C., et al.
(författare)
Tools for Early Prediction of Drug Loading in Lipid-Based Formulations
2016
Ingår i: Molecular Pharmaceutics. - : American Chemical Society (ACS). - 1543-8384 .- 1543-8392. ; 13:1, s. 251-261
Tidskriftsartikel (refereegranskat) abstract
Identification of the usefulness of lipid-based formulations (LBFs) for delivery of poorly water-soluble drugs is at date mainly experimentally based. In this work we used a diverse drug data set, and more than 2,000 solubility measurements to develop experimental and computational tools to predict the loading capacity of LBFs. Computational models were developed to enable in silico prediction of solubility, and hence drug loading capacity, in the LBFs. Drug solubility in mixed mono-, di-, triglycerides (Maisine 35-1 and Capmul MCM EP) correlated (R-2 0.89) as well as the drug solubility in Carbitol and other ethoxylated excipients (PEG400, R-2 0.85; Polysorbate 80, R-2 0.90; Cremophor EL, R-2 0.93). A melting point below 150 degrees C was observed to result in a reasonable solubility in the glycerides. The loading capacity in LBFs was accurately calculated from solubility data in single excipients (R-2 0.91). In silico models, without the demand of experimentally determined solubility, also gave good predictions of the loading capacity in these complex formulations (R-2 0.79). The framework established here gives a better understanding of drug solubility in single excipients and of LBF loading capacity. The large data set studied revealed that experimental screening efforts can be rationalized by solubility measurements in key excipients or from solid state information. For the first time it was shown that loading capacity in complex formulations can be accurately predicted using molecular information extracted from calculated descriptors and thermal properties of the crystalline drug.
