| 1. |
|
|
| 2. |
- Frank, Katherine S., et al.
(författare)
-
Magnetite as a provenance and exploration tool to metamorphosed base-metal sulfide deposits in the Stollberg ore field, Bergslagen, Sweden
- 2022
-
Ingår i: Mineralogical magazine. - : Cambridge University Press. - 0026-461X .- 1471-8022. ; 86:3, s. 373-396
-
Tidskriftsartikel (refereegranskat)abstract
- Magnetite is a common mineral in the Paleoproterozoic Stollberg Zn–Pb–Ag plus magnetite ore field (~6.6 Mt of production), which occurs in 1.9 Ga metamorphosed felsic and mafic rocks. Mineralisation at Stollberg consists of magnetite bodies and massive to semi-massive sphalerite–galena and pyrrhotite (with subordinate pyrite, chalcopyrite, arsenopyrite and magnetite) hosted by metavolcanic rocks and skarn. Magnetite occurs in sulfides, skarn, amphibolite and altered metamorphosed rhyolitic ash–siltstone that consists of garnet–biotite, quartz–garnet–pyroxene, gedrite–albite, and sericitic rocks. Magnetite probably formed from hydrothermal ore-bearing fluids (~250–400°C) that replaced limestone and rhyolitic ash–siltstone, and subsequently recrystallised during metamorphism. The composition of magnetite from these rock types was measured using electron microprobe analysis and LA–ICP–MS. Utilisation of discrimination plots (Ca+Al+Mn vs. Ti+V, Ni/(Cr+Mn) vs. Ti+V, and trace-element variation diagrams (median concentration of Mg, Al, Ti, V, Co, Mn, Zn and Ga) suggest that the composition of magnetite in sulfides from the Stollberg ore field more closely resembles that from skarns found elsewhere rather than previously published compositions of magnetite in metamorphosed volcanogenic massive sulfide deposits. Although the variation diagrams show that magnetite compositions from various rock types have similar patterns, principal component analyses and element–element variation diagrams indicate that its composition from the same rock type in different sulfide deposits can be distinguished. This suggests that bulk-rock composition also has a strong influence on magnetite composition. Principal component analyses also show that magnetite in sulfides has a distinctive compositional signature which allows it to be a prospective pathfinder mineral for sulfide deposits in the Stollberg ore field.
|
|
| 3. |
- Jansson, Nils F., et al.
(författare)
-
Principal component analysis and K-means clustering as tools during exploration for Zn skarn deposits and industrial carbonates, Sala area, Sweden
- 2022
-
Ingår i: Journal of Geochemical Exploration. - : Elsevier. - 0375-6742 .- 1879-1689. ; 233
-
Tidskriftsartikel (refereegranskat)abstract
- This contribution presents an application of principal component analysis (PCA) and K-means clustering as tools for data dimension reduction and grouping of multivariate, whole-rock lithogeochemical data. The study dataset consists of 64 geochemical variables and measurements of spectrophotometric brightness determined from 181 dolomite marble samples, collected at various distance from two contrasting types of mineral deposits, 1) stratabound, dolomite marble- and skarn-hosted Zn-Pb-Ag sulphide deposits and 2) industrial dolomite deposits. Clustering and PCA outputs are assessed based on spatial distribution relative to known mineral deposits and interpretability using geological domain knowledge, to test if the methods can provide a non-biased classification of dolomite samples which is useful for exploration vectoring. The PCA illustrate that three principle components derived from centered log-ratio transformed data can account for 79.69% of the dataset variance. K-means clustering provide unsupervised division of samples into different groups reflecting relative contents of detrital (siliciclastic-volcaniclastic), biogenic and hydrothermal components in the marble protoliths. Spatial analysis of principal components and K-means clusters reveal systematic distribution patterns relative to known deposits, thus providing an exploration guide. The samples most prospective for Zn-Pb-Ag deposits are divided into groups of ‘halo dolomite’ exhibiting elevated Fe and Mn, and an ‘ore dolomite’ also showing elevated Zn, Pb, Ag, Sb, Hg. This can be reconciled with magnetite and Mn-bearing Mg-silicates and carbonates in hydrothermal alteration haloes, and proximal enrichment in hydrothermal sulphides (galena, pyrrhotite, pyrite, sphalerite). Samples in these groups returned low spectrophotometric brightness, resulting from sulphides and Fe oxides grinding to dark powders during sample preparation, significantly lowering the brightness of powdered dolomite marble, even when occurring in low concentrations. Conversely, a ‘clean dolomite’ group is characterized by low contents of the elements above, high contents of Ca, Mg, Sr and total carbon, low magnetic susceptibility and high spectrophotometric brightness, and spatially coincide with known industrial dolomite deposits. An additional group of ‘detrital-rich dolomite’ is distinct from the other groups in an elevated content of high field strength elements and Al, and intermediate spectrophotometric brightness. This variety represent samples containing a higher content of co-settled volcaniclastic-siliciclastic material in the marble precursor. Assessment of the clustered data in relation to magnetic susceptibility measurements from the same samples show that Halo and Ore dolomite can be differentiated from other dolomite types by geomagnetic methods, hence providing a proxy for their indirect detection during geophysical surveys.
|
|
| 4. |
- Jansson, Nils, et al.
(författare)
-
Genesis of the Zinkgruvan stratiform Zn-Pb-Ag deposit and associated dolomite-hosted Cu ore, Bergslagen, Sweden
- 2016
-
Ingår i: Ore Geology Reviews. - : Elsevier BV. - 0169-1368 .- 1872-7360. ; 82, s. 285-308
-
Tidskriftsartikel (refereegranskat)abstract
- Zinkgruvan, a major stratiform Zn-Pb-Ag deposit in the Paleoproterozoic Bergslagen region, south-central Sweden, was overprinted by polyphase ductile deformation and high-grade metamorphism (including partial melting of the host succession) during the 1.9-1.8 Ga Svecokarelian orogeny. This complex history of post-ore modification has made classification of the deposit difficult. General consensus exists on a syngenetic-exhalative origin, yet the deposit has been variably classified as a volcanogenic massive sulfide (VMS) deposit, a sediment-hosted Zn (SEDEX) deposit, and a Broken Hill-type (BHT) deposit. Since 2010, stratabound, cobaltiferous and nickeliferous Cu ore, comprising schlieren and impregnations of Cu, Co and Ni sulfide minerals in dolomitic marble, is mined from the stratigraphic footwall to the stratiform Zn-Pb-Ag ore. This ore type has not been fully integrated into any of the existing genetic models. Based on a combination of 1) widespread hematite-staining and oxidizing conditions (Fe2O3>FeO) in the stratigraphic footwall, 2) presence of graphite and reducing conditions (Fe2O3 5 km) Zn-Pb-Ag ore was precipitated.Both ore types are characterized by significant spread in δ34S, with the sulphur in the Cu ore and associate marble-hosted Zn mineralization on average being somewhat heavier (δ34S = -4.7 to +10.5 ‰, average 3.9 ‰) than that in the stratiform Zn-Pb-Ag ore (δ34S = -6 to +17 ‰, average 2.0 ‰). The ranges in δ34S are significantly larger than those observed in syn-volcanic massive sulphide deposits in Bergslagen, for which simple magmatic/volcanic sulphur sources have been invoked. Mixing of magmatic-volcanic sulfur leached from underlying volcanic rocks and sulfur sourced from abiotic or bacterial sulfate reduction in a mixing zone at the seafloor could explain the range observed at Zinkgruvan.A distinct discontinuity in the stratigraphy, at which key stratigraphic units stop abruptly, is interpreted as a syn-sedimentary fault. Metal zonation in the stratiform ore (decreasing Zn/Pb from distal to proximal) and the spatial distribution of Cu mineralization in underlying dolomitic marble suggest that this fault was a major feeder to the mineralization. Our interpretation of ore-forming fluid composition and a dominant redox trap rather than a pH and/or temperature trap differs from most VMS models, with Selwyn-type SEDEX models, and most BHT models. Zinkgruvan has similarities to both McArthur-type SEDEX deposits and sediment-hosted Cu deposits in terms of the inferred ore fluid chemistry, yet the basinal setting has more similarities to BHT and felsic-bimodal VMS districts. We speculate that besides an oxidized footwall stratigraphy, regionally extensive banded iron formations and limestone horizons in the Bergslagen stratigraphy may have aided in buffering ore-forming brines to oxidized, near-neutral conditions. In terms of fluid chemistry, Zinkgruvan could comprise one of the oldest known manifestations of Zn and Cu ore-forming systems involving oxidized near-neutral brines following oxygenation of the Earth’s atmosphere.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Allen, Ann, et al.
(författare)
-
Geochemistry as a Tool for Exploration at the Renstrom Zn-Pb-Cu-Au-Ag VMS Camp, Skellefte District, Sweden
- 2015
-
Ingår i: Mineral Resources in a Sustainable World. - 9782855550664 ; , s. 2047-2050
-
Konferensbidrag (refereegranskat)abstract
- The Skellefte mining district in northern Sweden contains over 85 pyritic Zn-Cu-Au-Ag massive sulphide deposits. The Renstrom area, one of the most intensely mineralized parts of the Skellefte district, contains five zinc-and gold-rich deposits, three of which are confined to a specific continuous stratigraphic unit, the "Renstrom ore host unit". The great structural complexity of the area made it difficult to locate and follow the ore horizon to generate new exploration targets. A new study in the Kyrkvagen area, based on stratigraphic correlations, structural interpretations and lithogeochemical and geophysical data interpretation, revealed several NW-trending faults which separate five structural blocks. The rocks of the area could be characterized in terms of geochemistry, stratigraphy and their position in the hanging or footwall with respect to the ore horizon. Moreover, alteration patterns allowed predictions of possible extensions of the ore horizon. This increased knowledge of the Kyrkvagen area led to the identification of five new drilling targets for further exploration in one of Boliden's most important mining areas.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
