| 1. |
- Wang, Lei, et al.
(författare)
-
A nickel (II) PY5 complex as an electrocatalyst for water oxidation
- 2016
-
Ingår i: Journal of Catalysis. - : Elsevier BV. - 0021-9517 .- 1090-2694. ; 335, s. 72-78
-
Tidskriftsartikel (refereegranskat)abstract
- A Ni-PY5 [PY5 = 2,6-bis(1,1-bis(2-pyridyl)ethyl)pyridine)] complex has been found to act as an electrocatalyst for oxidizing water to dioxygen in aqueous phosphate buffer solutions. The rate of water oxidation catalyzed by the Ni-PY5 is remarkably enhanced by the proton acceptor base HPO42-, with rate constant of 1820 M-1 s(-1). Controlled potential bulk electrolysis with Ni-PY5 at pH 10.8 under an applied potential of 1.5 V vs. normal hydrogen electrode (NHE) resulted in dioxygen formation with a high faradaic efficiency over 90%. A detailed mechanistic study identifies the water nucleophilic attack pathway for water oxidation catalysis.
|
|
| 2. |
- Fang, Zhiyong, et al.
(författare)
-
Selective Electro-oxidation of Alcohols to the Corresponding Aldehydes in Aqueous Solution via Cu(III) Intermediates from CuO Nanorods
- 2021
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 9:35, s. 11855-11861
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical oxidation using renewable energy is an attractive strategy that provides a sustainable and mild approach for biomass transformation. Herein, the electrocatalytic oxidation of furfuryl alcohol in an aqueous solution was investigated using CuO nanorods. Two kinds of Cu-III intermediates, namely, (CuO2)(-) and (Cu2O6)(6-), were detected on the surface of the working electrode. (Cu2O6)(6-), generated in the potential range of 1.35-1.39 V versus the reversible hydrogen electrode (RHE), induced the oxidation of furfuryl alcohol to furaldehyde with a yield of >= 98%. (CuO2)(-), generated at a potential greater than 1.39 V versus RHE, which led to the oxidation of furfuryl alcohol to 2-furoic acid with a yield of >= 99%. Furthermore, the Cu-III-catalyzed system exhibited a measure of universal applicability, wherein (Cu2O6)(6-) and (CuO2)(-) induced the highly selective electro-oxidation of benzyl alcohol, vanillyl alcohol, and 4-pyridinemethanol to yield the corresponding aldehydes and acids, respectively.
|
|
| 3. |
- Ran, L., et al.
(författare)
-
Conformal Macroporous Inverse Opal Oxynitride-Based Photoanode for Robust Photoelectrochemical Water Splitting
- 2021
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 143:19, s. 7402-7413
-
Tidskriftsartikel (refereegranskat)abstract
- Direct photoelectrochemical (PEC) water splitting is of prime importance in sustainable energy conversion systems; however, it is a big challenge to simultaneously control light harvesting and charge transport for the improvement of PEC performance. Herein, we report a three-dimensional ordered macroporous (3DOM) CsTaWO6-xNx inverse opal array as a promising candidate for the first time. To address the critical challenge, an ultrathin carbon-nitride-based layer-intercalated 3DOM CsTaWO6-xNx architecture as a conformal heterojunction photoanode was assembled. This state-of-the-art conformal heterojunction photoanode with carrier-separation efficiency up to 88% achieves a high current density of 4.59 mA cm-2 at 1.6 V versus a reversible hydrogen electrode (vs RHE) under simulated AM 1.5G illumination, which is approximately 3.4 and 17 times larger than that of pristine CsTaWO6-xNx inverse opals and powers photoelectrodes in alkaline media, corresponding to an incident photon-to-current efficiency of 32% at 400 nm and outstanding stability for PEC water splitting. Density functional theory calculations propose that the intimate interface of a conformal photoanode optimizes the charge separation and transfer, thus enhancing the intrinsic water oxidation performance. This work enables us to elucidate the pivotal importance of 3DOM architectures and conformal heterostructures and the promising contributions to excellent PEC water-splitting applications.
|
|
| 4. |
- Yang, Hao, et al.
(författare)
-
Monolithic FAPbBr3 photoanode for photoelectrochemical water oxidation with low onset-potential and enhanced stability
- 2023
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Despite considerable research efforts on photoelectrochemical water splitting over the past decades, practical application faces challenges by the absence of efficient, stable, and scalable photoelectrodes. Herein, we report a metal-halide perovskite-based photoanode for photoelectrochemical water oxidation. With a planar structure using mesoporous carbon as a hole-conducting layer, the precious metal-free FAPbBr3 photovoltaic device achieves 9.2% solar-to-electrical power conversion efficiency and 1.4 V open-circuit voltage. The photovoltaic architecture successfully applies to build a monolithic photoanode with the FAPbBr3 absorber, carbon/graphite conductive protection layers, and NiFe catalyst layers for water oxidation. The photoanode delivers ultralow onset potential below 0 V versus the reversible hydrogen electrode and high applied bias photon-to-current efficiency of 8.5%. Stable operation exceeding 100 h under solar illumination by applying ultraviolet-filter protection. The photothermal investigation verifies the performance boost in perovskite photoanode by photothermal effect. This study is significant in guiding the development of photovoltaic material-based photoelectrodes for solar fuel applications.
|
|
| 5. |
- Guo, Yaxiao, et al.
(författare)
-
Molybdenum and boron synergistically boosting efficient electrochemical nitrogen fixation
- 2020
-
Ingår i: Nano Energy. - : Elsevier Ltd. - 2211-2855 .- 2211-3282. ; 78
-
Tidskriftsartikel (refereegranskat)abstract
- Ammonia production consumes ~2% of the annual worldwide energy supply, therefore strategic alternatives for the energy-intensive ammonia synthesis through the Haber-Bosch process are of great importance to reduce our carbon footprint. Inspired by MoFe-nitrogenase and the energy-efficient and industrially feasible electrocatalytic synthesis of ammonia, we herein establish a catalytic electrode for artificial nitrogen fixation, featuring a carbon fiber cloth fully grafted by boron-doped molybdenum disulfide (B-MoS2/CFC) nanosheets. An excellent ammonia production rate of 44.09 μg h–1 cm–2 is obtained at −0.2 V versus the reversible hydrogen electrode (RHE), whilst maintaining one of the best reported Faradaic efficiency (FE) of 21.72% in acidic aqueous electrolyte (0.1 M HCl). Further applying a more negative potential of −0.25 V renders the best ammonia production rate of 50.51 μg h–1 cm–2. A strong-weak electron polarization (SWEP) pair from the different electron accepting and back-donating capacities of boron and molybdenum (2p shell for boron and 5d shell for molybdenum) is proposed to facilitate greatly the adsorption of non-polar dinitrogen gas via N≡N bond polarization and the first protonation with large driving force. In addition, for the first time a visible light driven photo-electrochemical (PEC) cell for overall production of ammonia, hydrogen and oxygen from water + nitrogen, is demonstrated by coupling a bismuth vanadate BiVO4 photo-anode with the B-MoS2/CFC catalytic cathode.
|
|
| 6. |
- Hao, Yan, et al.
(författare)
-
Peripheral Hole Acceptor Moieties on an Organic Dye Improve Dye-Sensitized Solar Cell Performance
- 2015
-
Ingår i: Advanced Science. - : Wiley-Blackwell. - 2198-3844. ; 2:11
-
Tidskriftsartikel (refereegranskat)abstract
- Investigation of charge transfer dynamics in dye-sensitized solar cells is of fundamental interest and the control of these dynamics is a key factor for developing more efficient solar cell devices. One possibility for attenuating losses through recombination between injected electrons and oxidized dye molecules is to move the positive charge further away from the metal oxide surface. For this purpose, a metal-free dye named E6 is developed, in which the chromophore core is tethered to two external triphenylamine (TPA) units. After photoinduced electron injection into TiO2, the remaining hole is rapidly transferred to a peripheral TPA unit. Electron-hole recombination is slowed down by 30% compared to a reference dye without peripheral TPA units. Furthermore, it is found that the added TPA moieties improve the electron blocking effect of the dye, retarding recombination of electrons from TiO2 to the cobalt-based electrolyte.
|
|
| 7. |
- Liu, Peng, et al.
(författare)
-
Molecular Engineering of D-pi-A Type of Blue-Colored Dyes for Highly Efficient Solid-State Dye-Sensitized Solar Cells through Co-Sensitization
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 10:42, s. 35946-35952
-
Tidskriftsartikel (refereegranskat)abstract
- A novel blue-colored organic donor-pi-acceptor sensitizer, the so-called MKA16 dye, has been employed to construct solid-state dye-sensitized solar cells (ssDSSCs). Using 2,2',7-,7'-tetrakis(N,N-di-p-methoxyphenyl-amine) 9,9'-spirobifuorene (Spiro-OMeTAD) as hole-transport material, a good conversion efficiency of 5.8% was recorded for cells based on the MKA16 dye and a high photovoltage of 840 mV in comparison with 5.6% efficiency using the known (Dyenamo Blue) dye. By co-sensitization using the orange-colored D35 dye and MKA16 together, the solid-state solar cells showed an excellent efficiency of 7.5%, with a high photocurrent of 12.41 mA cm(-2) and open-circuit voltage of 850 mV. The results show that the photocurrent of ssDSSCs can be significantly improved by co-sensitization mainly attributed to the wider light absorption range contributing to the photocurrent. In addition, results from photo-induced absorption spectroscopy show that the dye regeneration is efficient in co-sensitized solar cells. The current results possible routes of improving the design of aesthetic and highly efficient ssDSSCs.
|
|
| 8. |
- Wang, Linqin, et al.
(författare)
-
Design and synthesis of dopant-free organic hole-transport materials for perovskite solar cells
- 2018
-
Ingår i: Chemical Communications. - : ROYAL SOC CHEMISTRY. - 1359-7345 .- 1364-548X. ; 54:69, s. 9571-9574
-
Tidskriftsartikel (refereegranskat)abstract
- Two novel dopant-free hole-transport materials (HTMs) with spiro[dibenzo[c,h]xanthene-7,9-fluorene] (SDBXF) skeletons were prepared via facile synthesis routes. A power conversion efficiency of 15.9% in perovskite solar cells is attained by using one HTM without dopants, which is much higher than undoped Spiro-OMeTAD-based devices (10.8%). The crystal structures of both new HTMs were systematically investigated to reveal the reasons behind such differences in performance and to indicate the design principles of more advanced HTMs.
|
|
| 9. |
- Gabrielsson, Erik, et al.
(författare)
-
Convergent/Divergent Synthesis of a Linker-Varied Series of Dyes for Dye-Sensitized Solar Cells Based on the D35 Donor
- 2013
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 3:12, s. 1647-1656
-
Tidskriftsartikel (refereegranskat)abstract
- A series of four new dyes, based on the D35 type donor moiety with varied linker units, is synthesized using a facile convergent/divergent method, enabled by an improved synthesis of the D35 donor. The dyes are evaluated in dye sensitized solar cells with Co(II/III)(bpy)3-based electrolytes. By extending the linker fragment, higher photocurrents and solar energy conversion efficiencies are achieved. It is also found that the linker unit plays a crucial role in maintaining a high open-circuit photovoltage. Based on the photovoltaic performance it is concluded that the hexylthiophene unit is the most suitable for this purpose, as it allows further enhancement of the already high open-circuit voltage of D35 to 0.92 V. The best dye in this series reaches an efficiency of 6.8%.
|
|
| 10. |
- Guo, Yu, et al.
(författare)
-
Closing Kok’s cycle of nature’s water oxidation catalysis
- 2024
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Mn4CaO5(6) cluster in photosystem II catalyzes water splitting through the Si state cycle (i = 0–4). Molecular O2 is formed and the natural catalyst is reset during the final S3 → (S4) → S0 transition. Only recently experimental breakthroughs have emerged for this transition but without explicit information on the S0-state reconstitution, thus the progression after O2 release remains elusive. In this report, our molecular dynamics simulations combined with density functional calculations suggest a likely missing link for closing the cycle, i.e., restoring the first catalytic state. Specifically, the formation of closed-cubane intermediates with all hexa-coordinate Mn is observed, which would undergo proton release, water dissociation, and ligand transfer to produce the open-cubane structure of the S0 state. Thereby, we theoretically identify the previously unknown structural isomerism in the S0 state that acts as the origin of the proposed structural flexibility prevailing in the cycle, which may be functionally important for nature’s water oxidation catalysis.
|
|
