| 1. |
- An, Junxue, et al.
(författare)
-
Effect of solvent quality and chain density on normal and frictional forces between electrostatically anchored thermoresponsive diblock copolymer layers
- 2017
-
Ingår i: Journal of Colloid and Interface Science. - : Academic Press. - 0021-9797 .- 1095-7103. ; 487, s. 88-96
-
Tidskriftsartikel (refereegranskat)abstract
- Equilibration in adsorbing polymer systems can be very slow, leading to different physical properties at a given condition depending on the pathway that was used to reach this state. Here we explore this phenomenon using a diblock copolymer consisting of a cationic anchor block and a thermoresponsive block of poly(2-isopropyl-2-oxazoline), PIPOZ. We find that at a given temperature different polymer chain densities at the silica surface are achieved depending on the previous temperature history. We explore how this affects surface and friction forces between such layers using the atomic force microscope colloidal probe technique. The surface forces are purely repulsive at temperatures <40 °C. A local force minimum at short separation develops at 40 °C and a strong attraction due to capillary condensation of a polymer-rich phase is observed close to the bulk phase separation temperature. The friction forces decrease in the cooling stage due to rehydration of the PIPOZ chain. A consequence of the adsorption hysteresis is that the friction forces measured at 25 °C are significantly lower after exposure to a temperature of 40 °C than prior to heating, which is due to higher polymer chain density on the surface after heating.
|
|
| 2. |
- Wieland, D. C. Florian, et al.
(författare)
-
Structure of DPPC-hyaluronan interfacial layers - effects of molecular weight and ion composition
- 2016
-
Ingår i: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 12:3, s. 729-740
-
Tidskriftsartikel (refereegranskat)abstract
- Hyaluronan and phospholipids play an important role in lubrication in articular joints and provide in combination with glycoproteins exceptionally low friction coefficients. We have investigated the structural organization of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) Langmuir layers at the solution-air interface at different length scales with respect to the adsorption of hyaluronan (HA). This allows us to assemble a comprehensive picture of the adsorption and the resulting structures, and how they are affected by the molecular weight of HA and the presence of calcium ions. Brewster angle microscopy and grazing incident diffraction were used to determine the lateral structure at the micro- and macro scale. The data reveals an influence of HA on both the macro and micro structure of the DPPC Langmuir layer, and that the strength of this effect increases with decreasing molecular weight of HA and in presence of calcium ions. Furthermore, from X-ray reflectivity measurements we conclude that HA adsorbs to the hydrophilic part of DPPC, but data also suggest that two types of interfacial structures are formed at the interface. We argue that hydrophobic forces and electrostatic interactions play important rules for the association between DPPC and HA. Surface pressure area isotherms were used to determine the influence of HA on the phase behavior of DPPC while electrophoretic mobility measurements were used to gain insight into the binding of calcium ions to DPPC vesicles and hyaluronan.
|
|
| 3. |
- Wieland, D. C. Florian, et al.
(författare)
-
Studying solutions at high shear rates : A dedicated microfluidics setup
- 2016
-
Ingår i: Journal of Synchrotron Radiation. - : International Union of Crystallography. - 0909-0495 .- 1600-5775. ; 23:2, s. 480-486
-
Tidskriftsartikel (refereegranskat)abstract
- The development of a dedicated small-angle X-ray scattering setup for the investigation of complex fluids at different controlled shear conditions is reported. The setup utilizes a microfluidics chip with a narrowing channel. As a consequence, a shear gradient is generated within the channel and the effect of shear rate on structure and interactions is mapped spatially. In a first experiment small-angle X-ray scattering is utilized to investigate highly concentrated protein solutions up to a shear rate of 300000 s-1. These data demonstrate that equilibrium clusters of lysozyme are destabilized at high shear rates.
|
|
| 4. |
- An, Junxue, et al.
(författare)
-
Tethered Poly(2-isopropyl-2-oxazoline) Chains : Temperature Effects on Layer Structure and Interactions Probed by AFM Experiments and Modeling
- 2015
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 31:10, s. 3039-3048
-
Tidskriftsartikel (refereegranskat)abstract
- Thermoresponsive polymer layers on silica surfaces have been obtained by utilizing electrostatically driven adsorption of a cationic-nonionic diblock copolymer. The cationic block provides strong anchoring to the surface for the nonionic block of poly(2-isopropyl-2-oxazoline), referred to as PIPOZ. The PIPOZ chain interacts favorably with water at low temperatures, but above 46 degrees C aqueous solutions of PIPOZ phase separate as water becomes a poor solvent for the polymer. We explore how a change in solvent condition affects interactions between such adsorbed layers and report temperature effects on both normal forces and friction forces. To gain further insight, we utilize self-consistent lattice mean-field theory to follow how changes in temperature affect the polymer segment density distributions and to calculate surface force curves. We find that with worsening of the solvent condition an attraction develops between the adsorbed PIPOZ layers, and this observation is in good agreement with predictions of the mean-field theory. The modeling also demonstrates that the segment density profile and the degree of chain interpenetration under a given load between two PIPOZ-coated surfaces rise significantly with increasing temperature.
|
|
| 5. |
- Bodvik, Rasmus, et al.
(författare)
-
Aggregation and network formation of aqueous methylcellulose and hydroxypropylmethylcellulose solutions.
- 2010
-
Ingår i: Colloids and Surfaces A. - : Elsevier. - 0927-7757 .- 1873-4359. ; 354:1-3, s. 162-171
-
Tidskriftsartikel (refereegranskat)abstract
- Solution properties of methylcellulose (MC) and hydroxypropylmethylcellulose (HPMC) have been investigated as a function of temperature and concentration using a broad range of experimental techniques. Novelties include the extensive comparison between MC and HPMC solutions as well as the combination of techniques, and the use of Cryo transmission electron microscopy (Cryo-TEM). The correlation between rheology and light scattering results clearly demonstrates the relation between viscosity change and aggregation. Cryo-TEM images show the network structures formed. Viscosity measurements show that for both MC and HPMC solutions sudden changes in viscosity occur as the temperature is increased. The onset temperature for these changes depends on polymer concentration and heating rate. For both MC and HPMC solutions the viscosity on cooling is very different compared to on heating, demonstrating the slow equilibration time. The viscosity changes in MC and HPMC solutions are dramatically different; for MC solutions the viscosity increases by several orders of magnitude when a critical temperature is reached, whereas for HPMC solutions the viscosity decreases abruptly at a given temperature, followed by an increase upon further heating. Light and (SAXS) small-angle X-ray scattering shows that the increase in viscosity, for MC as well as for HPMC solutions, is due to extensive aggregation of the polymers. Light scattering also provides information on aggregation kinetics. The SAXS measurements allow us to correlate aggregation hysteresis to the viscosity hysteresis, as well as to extract some structural information. Cryo-TEM images give novel information that a fibrillar network is formed in MC solutions, and the strong viscosity increase occurs when this network spans the whole solution volume. For HPMC solutions the behaviour is more complex. The decrease in viscosity can be related to the formation of compact objects, and the subsequent increase to formation of fibrillar structures, which are more linear and less entangled than for MC.
|
|
| 6. |
- Liu, Xiaoyan, et al.
(författare)
-
Association of anionic surfactant and physisorbed branched brush layers probed by neutron and optical reflectometry
- 2015
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797 .- 1095-7103. ; 440, s. 245-252
-
Tidskriftsartikel (refereegranskat)abstract
- Pre-adsorbed branched brush layers were formed on silica surfaces by adsorption of a diblock copolymer consisting of a linear cationic block and an uncharged bottle-brush block. The charge of the silica surface was found to affect the adsorption, with lower amounts of the cationic polyelectrolytedepositing on less charged silica. Cleaning under basic conditions rendered surfaces more negatively charged (more negative zeta-potential) than acid cleaning and was therefore used to increase polyelectrolyte adsorption. The structure of adsorbed layers of the diblock copolymer was as determined by neutron reflectometry found to be about 70 nm thick and very water rich (97%). Interactions between the anionic surfactant sodium dodecylsulfate (SDS) and such pre-adsorbed diblock polymer layers were studied by neutron reflectometry and by optical reflectometry. Optical reflectometry was also used for deducing interactions between the individual blocks of the diblock copolymer and SDS at the silica/aqueous interface. We find that SDS is readily incorporated in the diblock copolymer layer at low SDS concentrations, and preferentially co-localized with the cationic block of the polymer next to the silica surface. At higher SDS concentrations some desorption of polyelectrolyte/surfactant complexes takes place.
|
|
| 7. |
- Raj, Akanksha, et al.
(författare)
-
Molecular synergy in biolubrication: The role of cartilage oligomeric matrix protein (COMP) in surface-structuring of lubricin.
- 2017
-
Ingår i: Journal of colloid and interface science. - : Elsevier BV. - 1095-7103 .- 0021-9797. ; 495, s. 200-206
-
Tidskriftsartikel (refereegranskat)abstract
- Synovial surfaces are lubricated by biomolecular aggregates that act in synergy, and lubricin is one key biolubricant. Its molecular structure allows extensive hydration and this is conducive to its lubrication performance. However, in order to fullfil its lubrication function it needs to be anchored and oriented on the surface in a proper way. We suggest that cartilage oligomeric matrix protein (COMP) is one of the biomolecules that promotes anchoring of lubricin in a fashion that facilitates lubrication.Weakly hydrophobic poly(methyl methacrylate) (PMMA) surfaces were coated by COMP and lubricin, individually and in combinations. Adsorption was investigated using a quartz crystal microbalance, and friction between the biopolymer-coated surfaces was determined by employing the atomic force microscope-colloidal probe technique.It was found that COMP facilitated firm directed attachment of lubricin in a manner that resulted in low friction forces, significantly lower than what was achieved when lubricin was directly adsorbed to PMMA. Evidently, COMP provides means for lubricin to attach strongly and in a favourable conformation for efficient lubrication of this surface. We suggest that our findings can be extrapolated to cartilage surfaces, where co-localization of COMP and lubricin has been demonstrated.
|
|
| 8. |
- Shovsky, Alexander, et al.
(författare)
-
Cationic poly(N -isopropylacrylamide) block copolymer adsorption investigated by dual polarization interferometry and lattice mean-field theory
- 2012
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 28:39, s. 14028-14038
-
Tidskriftsartikel (refereegranskat)abstract
- A series of cationic diblock copolymers, poly(N-isopropylacrylamide) 48-block-poly((3-acrylamidopropyl)trimethylammonium chloride) X, abbreviated as PNIPAAM48-b-PAMPTMA+ X (X = 0, 6, 10, 14, and 20), has been synthesized, and their adsorption onto silicon oxynitride from aqueous solution has been investigated using dual polarization interferometry. The polymer adsorption was modeled by using a lattice mean-field theory, and a satisfactory consistency between theory and experiments was found in terms of surface excess and layer thickness. Both theory and experiments show that the adsorption is limited by steric repulsion for X < Xmax and by electrostatic interactions for X > X max. Modeling demonstrates that significant surface charge regulation occurs due to adsorption. Both the nonionic and cationic block exhibit nonelectrostatic affinity to silicon oxynitride and thus contribute to the driving force for adsorption, and modeling is used for clarifying how changes in the nonelectrostatic affinity affects the surface excess. The segments of the nonionic and cationic blocks seem less segregated when both have a nonelectrostatic affinity for the surface compared to the case where the segments had no surface affinity. Adsorption kinetics was investigated experimentally. Two kinetic regimes were observed: the adsorption rate is initially controlled by the mass transfer rate to the surface and at higher coverage is limited by the attachment rate.
|
|
| 9. |
- Wang, Min, 1985-
(författare)
-
Biolubricants and Biolubrication
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main objective of this thesis work was to gain understanding of the principles of biolubrication, focusing on synergistic effects between biolubricants. To this end surface force and friction measurements were carried out by means of Atomic Force Microscopy, using hydrophilic and hydrophobic model surfaces in salt solutions of high ionic strength (≈ 150 mM) in presence of different biolubricants. There was also a need to gain information on the adsorbed layers formed by the biolubricants. This was achieved by using a range of methods such as Atomic Force Microscopy PeakForce imaging, Quartz Crystal Microbalance with Dissipation, Dynamic Light Scattering and X-Ray Reflectometry. By combining data from these techniques, detailed information about the adsorbed layers could be obtained.The biolubricants that were chosen for investigation were a phospholipid, hyaluronan, lubricin, and cartilage oligomeric matrix protein (COMP) that all exist in the synovial joint area. First the lubrication ability of these components alone was investigated, and then focus was turned to two pairs that are known or assumed to associate in the synovial area. Of the biolubricants that were investigated, it was only the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) that was found to be an efficient lubricant on its own. Deposited DPPC bilayers on silica surfaces were found to be able to provide very low friction coefficients (≈ 0.01) up to high pressures, ≈ 50 MPa. A higher load bearing capacity was found for DPPC in the liquid crystalline state compared to in the gel state.The first synergy pair that was explored was DPPC and hyaluronan, that is known to associate on the cartilage surface, and we also noticed association between hyaluronan and DPPC vesicles as well as with adsorbed DPPC bilayers. By combining these two components a lubrication performance similar to that of DPPC alone could be achieved, even though the friction coefficient in presence of hyaluronan was found to be slightly higher. The synergy here is thus not in form of an increased performance, but rather that the presence of hyaluronan allows a large amount of the phospholipid lubricant to accumulate where it is needed, i.e. on the sliding surfaces.The other synergy pair was lubricin and COMP that recently has been shown to be co-localized on the cartilage surface, and thus suggested to associate with each other. Lubricin, as a single component, provided poor lubrication of PMMA surfaces, which we utilized as model hydrophobic surfaces. However, if COMP first was allowed to coat the surface, and then lubricin was added a low friction coefficient (≈ 0.03) was found. In this case the synergy arises from COMP facilitating strong anchoring of lubricin to the surface in conformations that provide good lubrication performance.
|
|
| 10. |
- Zander, Thomas, et al.
(författare)
-
The influence of hyaluronan on the structure of a DPPC-bilayer under high pressures
- 2016
-
Ingår i: Colloids and Surfaces B. - : Elsevier. - 0927-7765 .- 1873-4367. ; 142, s. 230-238
-
Tidskriftsartikel (refereegranskat)abstract
- The superior lubrication properties of synovial joints have inspired many studies aiming at uncovering the molecular mechanisms which give rise to low friction and wear. However, the mechanisms are not fully understood yet, and, in particular, it has not been elucidated how the biolubricants present at the interface of cartilage respond to high pressures, which arise during high loads of joints. In this study we utilize a simple model system composed of two biomolecules that have been implied as being important for joint lubrication. It consists of a solid supported dipalmitoylphosphatidylcholin (DPPC) bilayer, which was formed via vesicles fusion on a flat Si wafer, and the anionic polysaccharide hyaluronan (HA). We first characterized the structure of the HA layer that adsorbed to the DPPC bilayers at ambient pressure and different temperatures using X-ray reflectivity (XRR) measurements. Next, XRR was utilized to evaluate the response of the system to high hydrostatic pressures, up to 2 kbar (200 MPa), at three different temperatures. By means of fluorescence microscopy images the distribution of DPPC and HA on the surface was visualized. Our data suggest that HA adsorbs to the headgroup region that is oriented towards the water side of the supported bilayer. Phase transitions of the bilayer in response to temperature and pressure changes were also observed in presence and absence of HA. Our results reveal a higher stability against high hydrostatic pressures for DPPC/HA composite layers compared to that of the DPPC bilayer in absence of HA.
|
|
