SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "hsv:(TEKNIK OCH TEKNOLOGIER) ;mspu:(doctoralthesis)"

Sökning: hsv:(TEKNIK OCH TEKNOLOGIER) > Doktorsavhandling

  • Resultat 1-10 av 11608
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • A Asif, Farazee M, 1980- (författare)
  • Circular Manufacturing Systems : A development framework with analysis methods and tools for implementation
  • 2017
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The society today lives on the philosophy of ‘take-make-use-dispose.’ In the long run, this is not sustainable as the natural resources and the waste carrying capacity of the earth are limited. Therefore, it is essential to reduce dependency on the natural resources by decoupling the growth from the consumption. In this venture, both the society and the manufacturing industry have a vital role to play. The society needs to shift towards Circular Economy that rests upon the philosophy of ‘take-make-use-reuse’ and the manufacturing industry has to be a major stakeholder in this shift. Despite being proven to be both economically and environmentally beneficial, successful examples of circular systems are few today. This is primarily due to two reasons; firstly, there is a lack of systemic and systematic approach to guide industries and secondly, there is a lack of analysis methods and tools that are capable of assessing different aspects of circular manufacturing systems. Taking on to these challenges, the objective of this research is to bring forward a framework with methods and decision support tools that are essential to implement circular manufacturing systems. The initial conceptual framework with the systemic approach is developed based on extensive review and analysis of research, which is further adapted for industrial implementation. Systematic analysis methods, decision support and implementation tools are developed to facilitate this adaptation. This development has been supported by four cases from diverse manufacturing sectors. Behind each decision support tool, there are analysis methods built upon mainly system dynamics principles. These tools are based on simulation platforms called Stella and Anylogic. Among other things, these tools are capable of assessing the performance of closed-loop supply chains, consequences of resource scarcity, potential gains from resource conservation and overall economic and environmental performance of circular manufacturing systems.
  •  
2.
  • A. M. Naiini, Maziar, 1980- (författare)
  • Horizontal Slot Waveguides for Silicon Photonics Back-End Integration
  • 2014
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • This thesis presents the development of integrated silicon photonic devices. These devices are compatible with the present and near future CMOS technology. High-khorizontal grating couplers and waveguides are proposed. This work consists of simulations and device design, as well as the layout for the fabrication process, device fabrication, process development, characterization instrument development and electro-optical characterizations.The work demonstrates an alternative solution to costly silicon-on-insulator photonics. The proposed solution uses bulk silicon wafers and thin film deposited waveguides. Back-end deposited horizontal slot grating couplers and waveguides are realized by multi-layers of amorphous silicon and high-k materials.The achievements of this work include: A theoretical study of fully etched slot grating couplers with Al2O3, HfO2 and AIN, an optical study of the high-k films with spectroscopic ellipsometry, an experimental demonstration of fully etched SiO2 single slot grating couplers and double slot Al2O3 grating couplers, a practical demonstration of horizontal double slot high-k waveguides, partially etched Al2O3 single slot grating couplers, a study of a scheme for integration of the double slot Al2O3  waveguides with selectively grown germanium PIN photodetectors, realization of test chips for the integrated germanium photodetectors, and study of integration with graphene photodetectors through embedding the graphene into a high-k slot layer.From an application point of view, these high-k slot waveguides add more functionality to the current silicon photonics. The presented devices can be used for low cost photonics applications. Also alternative optical materials can be used in the context of this photonics platform.With the robust design, the grating couplers result in improved yield and a more cost effective solution is realized for integration of the waveguides with the germanium and graphene photodetectors.    
  •  
3.
  • A Monfared, Behzad, 1983- (författare)
  • Magnetic Refrigeration for Near Room-Temperature Applications
  • 2018
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Refrigeration plays a crucial role in many different sectors and consumes about 17% of the electricity produced globally. This significant energy consumption implies large share of refrigeration in primary energy consumption and other environmental impacts. In addition to the environmental impacts associated with energy consumption, the vapor-compression systems contribute in global warming due to the release of their gaseous refrigerants into the atmosphere. As an alternative technology for near room-temperature applications, magnetic refrigeration is proposed by some researchers to eliminate the release of gaseous refrigerants into the atmosphere and to reduce the energy consumption. This thesis is a compilation of a number of studies done on magnetic refrigeration for room-temperature applications.In the first study, the environmental impacts associated to magnetic refrigeration are looked at closely through a life cycle assessment. The life cycle assessment indicates that because of the environmental burdens related to the rare-earth materials used in magnetic refrigeration, the reduction in the environmental impacts is not guaranteed by switching to magnetic refrigeration technology. Accordingly to avoid the extra environmental impacts the magnetic refrigeration systems should use magnetic materials frugally, which requires an optimized design. In addition, operation with higher efficiency compared to vapor-compression systems is necessary to have environmental advantages, at least in some impact categories.A practical method to optimize the design of magnetic refrigeration systems, e.g. to have a compact design or high efficiency, is utilizing a flexible software model, with which the effect of varying different parameters on the performance of the system can be simulated. Such a software model of the magnetic refrigeration system is developed and validated in this project. In developing the model one goal is to add to the precision of the simulated results by taking more details into consideration. This goal is achieved by an innovative way of modeling the parasitic heat transfer and including the effect of the presence of magnetocaloric materials on the strength of the field created by the magnet assembly. In addition, some efforts are made to modify or correct the existing correlations to include the effect of binding agents used in some active magnetic regenerators. Validation of the developed software model is done using the experimental results obtained from the prototype existing at the Department of Energy Technology, KTH Royal Institute of Technology.One of the parameters that can be modified by the developed software model is the choice of the magnetocaloric materials for each layer in a layered active magnetic regenerator. Utilizing the software model for optimizing the choice of the materials for the layers reveals that materials with critical temperatures equal to the cyclic average temperature of the layers in which they are used do not necessarily result in the desired optimum performance. In addition, for maximizing different outputs of the models, such as energy efficiency or temperature lift sustained at the two ends of the regenerators, different choice of materials for the layers are needed. Therefore, in other studies seeking to improve one of the outputs of a system, the choice of the transition or critical temperatures of the materials for each layer is an additional parameter to be optimized.The prototype existing at the Department of Energy Technology, KTH Royal Institute of Technology, was initially designed for replacing the vapor-compression system of a professional refrigerator. However, it could not fulfil the requirements for which it was initially designed. The aforementioned developed simulation model is used to see how much the choice of the materials, size of the particles, and number of layers can enhance the performance while the operation frequency and flow rate of the heat transfer fluid are at their optimum values. In other words, in that study the room for improvement in the performance without applying major changes in the system such as the geometry of the regenerator, which implies redesigning the whole magnet assembly, is investigated. In the redesign process the effect of binding agent and the limitations associated to different properties of it is also investigated theoretically. Nevertheless, the study did not show that with keeping the geometry of the regenerators and the currently existing magnetocaloric materials the initial goals of the prototype can be achieved.In the next study more flexible choice of geometries and magnetocaloric materials are considered. In fact, in this study it is investigated how much the magnetocaloric materials need to be improved so that magnetic refrigeration systems can compete with vapor-compression ones in terms of performance. For the two investigated cases, the magnetic-field dependent properties of the currently existing materials are enough provided that some other issues such as low mechanical stability and inhomogeneity of the properties are solved. Nevertheless, for more demanding design criteria, such as delivering large cooling capacity over a considerable temperature span while the magnetic materials are used sparingly, the magnetic-field dependent properties need to be enhanced, as well.A less explored area in room-temperature magnetic refrigeration is the subject of another study included in the thesis. In this study, solid-state magnetic refrigeration systems with Peltier elements as heat switches are modeled. Since the Peltier elements consume electricity to pump heat, the modeled systems can be considered hybrid magnetocaloric-Peltier cooling systems. For such systems the detailed transient behavior of the Peltier elements together with layers of magnetocaloric materials are modeled. The mathematical model is suitable for implementation in programing languages without the need for commercial modeling platforms. The parameters affecting the performance of the modeled system are numerous, and optimization of them requires a separate study. However, the preliminary attempts on optimizing the modeled system does not give promising results. Accordingly, focusing on passive heat switches can be more beneficial.
  •  
4.
  • Aaboen, Lise, 1978 (författare)
  • Incubators and incubation -Resources and activities in relation to different actors
  • 2008
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • ABSTRACTIncubators prepare new technology-based firms (NTBFs) for the obstacles ahead, they complement and develop the entrepreneurial ability of the firm founder, advise regarding financing, as well as providing structure and credibility to the firm. Incubators accelerate the development of the firms towards growth, create an entrepreneurial and innovative climate in the region, and contribute to the commercialization of research results from the university. There are many descriptions but still there remains the difficulty of understanding what an incubator is, and what it does. There is a great difference between incubators due to them having been formed in relation to different actors who have varying histories. Based on the appended papers the principal actors in relation to incubators are: the incubator, the NTBFs, the university, the policy actors and the financial actors. Moreover, the part played by the incubator differs depending on the roles in relation to the different actors, and they often have more than one role in relation to the same actor. Hence, the purpose of this thesis is to explore incubation in relation to different actors. The exploration includes five appended papers. Three of the papers focus on the role of the incubators when helping the NTBFs find and utilize resources. The three types of resources are knowledge, financing and relationships. The two remaining papers focus on the incubator as an organization with particular interest in value creation and efficiency. All five appended papers are written using the resource-based view. In the cover paper the findings in the appended papers are reflected upon using the industrial network approach in order to provide another perspective, focusing on relationships as opportunities leading to an understanding of incubators and incubation. In the cover paper principal actors, activities and resources are explored. The NTBFs are developed through the incubation with the help of resources contributed by the other actors. Additional to the development, the cover paper discussed other activities included in the incubation, i.e. mediation, innovation and acceleration. These activities enable actors to access and combine resources, within and across firm boundaries, that they would otherwise have difficulties combining at that point in time, as quickly or in that way. The relationships of the incubator enable mediation of contacts between actors who are otherwise reluctant to collaborate. Through these collaborations new resource combinations may be found. Resource combinations in already existing relationship can be found using experience from other relationships. In other words, the relationships of the incubator contribute to innovation among the actors. Furthermore, the relationships of the incubator contribute to the acceleration of the NTBFs’ development by being a trusted third party actor, and by contributing to the coordination of actors aiming at improving the innovative climate. Hence, relationships are a special kind of resource for the incubators. The importance of the relationships for the incubators implies that the critical issues might not be to pick NTBFs based on criteria for growth potential, but rather on the ability to form and develop relationships for themselves, as well as the NTBF, in order to develop the firm. Furthermore, arguments regarding the increasing homogeneity among Swedish incubators are based on the rather formalized relationships with the policy actors where incubators tend to play rather similar roles. The heterogeneity is likely to be perceived as larger from the perspective of relationships that are more context specific. Moreover, the relationships, activities and combination of resources cross-fertilize each other without a natural or manageable direction that cannot be controlled by one or a few of the actors involved. After the concluding discussion there is a retrospection of the development of the thesis and the empirical material, which is based on qualitative and quantitative data that has been gathered within the Swedish incubator program mainly during 1999, 2005 and 2006.
  •  
5.
  • Aalto, Susanne, 1964 (författare)
  • Molecular Clouds in Starburst Galaxies
  • 1994
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Starbursts in the centres of galaxies are believed to be caused by funneling of gas towards the inner regions. Gravitational interactions between galaxies are known to cause vast rearrangements of their structure as well as induce bursts of star formation in their nuclear regions. However, radial gas-transport may also be the result of a bar- instability intrinsic to the system. This report deals with the effect of a starburst on the molecular medium of galaxies. The mm-wave, rotational transitions of interstellar molecules serve as probes of the physical conditions, kinematics and total mass of the molecular gas. Observations of the J=1-0, J=2-1 and J=3-2 transitions of 12Co, the J=1-0 and J=2-1 transitions of 13Co, the J=1-0 transitions of C180 and HCN and the J=2-1 transition of CS are used to determine the properties of the molecular gas in starbursting and normal galaxies. The mean escape probability approximation is used to solve the radiative transfer equations. The inferred properties of the molecular clouds in the centres of starburst galaxies differ from those of Galactic disk clouds. Such a deviation is likely to be induced by a central gas concentration and/or the nuclear starburst disrupting the clouds. Large 12CO/13CO J=1-0 intensity ratios (R>20) are measured towards luminous mergers implying unusual, high-pressure, molecular cloud ensembles. Model cloud ensembles for the merging system, NGC 3256, and the starburst spiral NGC 1808 suggest that the 12CO-emission is dominated by warm (Tk = 100 - 300 K), small (0.5-1 pc) and moderately dense (n = 2 - 7 x 103 cm-3) molecular clouds. Such temperatures and densities are typical of Galactic photon dominated regions (PDRs). Statistical studies of molecular line ratios towards galaxy centres indicate that the optical depth of the 12CO 1-0 emission is moderate, .tau.Ã? 1. Many starburst galaxies have large-scale excitation gradients indicating warm, dense gas in the centre, and normal cool molecular gas in their extended disks. NGC 3256, in particular, has a large R = 35 in the centre, while it is found to be only R = 10 - 15 at positions 43" off centre. The model cloud ensemble of NGC 1808 indicate that the 12CO-emitting gas may be diffuse rather than self-gravitating, this could be a common phenomenon in starburst galaxies.
  •  
6.
  •  
7.
  • Abadei, Saeed, 1961 (författare)
  • Ferroelectric Thin Films on Si-substrate for Tunable Microwave Applications
  • 2004
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The thesis presents the development of microwave tunable devices based onferroelectric thin films. The main tasks in this work are the fabrication, optimization, andintegration of ferroelectric thin film into Si-MMIC. This work has been motivated byincreased interest on advanced tunable microwave components which meet therequirements of low microwave losses, high tunability, easy to integrate to largersystems, and low cost.Dielectric permittivity, tunability, and loss tangent are the most important parameters,characterizing ferroelectrics for application in tunable microwave devices. Most of theefforts in this work have been devoted to the optimization of film fabrication processes interms of microwave loss reduction. Experimental investigations of these parameters forNa0.5K0.5NbO3 (NKN), (SrTiO3) STO, Ba0.25Sr0.75TiO3 (BSTO) and (Pb, Zr) TiO3 (PZT)films are carried out in a wide frequency, DC bias, and temperature ranges. Thesemeasurements give important information about dispersion, temperature, and dc-fielddependencies of dielectric permittivity and losses. The latter are useful for understandingthe basic physical processes in ferroelectric films and help to optimize film depositionand device fabrication processes in terms of low losses, high tunability, and temperaturestability.Coplanar-plate structure is used to integrate the ferroelectric films into the siliconcircuits. Planar varactors are fabricated by depositing tunable ferroelectric films onSi/SiO2 substrates using laser ablation, RF magnetron sputtering, and sol-gel technique,followed by metal electrode deposition. Different varactor designs based on as straightgap, interdigital gap, and circular gap have been investigated and further used in thecomponents. Experiments show the capability and potential of tunable devices based onferroelectric thin films and confirm that they are competitive with other technologies likesemiconductors at frequency above 20 GHz. It is shown that NKN films in polar phaseare also useful for tunable microwave applications demonstrating low loss and goodtunability in a frequency above 20 GHz. BSTO films, which are in paraelectric phase atroom temperature, are used to fabricate microwave varactors. These varactors are used intwo different phase shifters designs. These tunable devices show more than 60°/dB figureof merit, which is one the best value reported so far.
  •  
8.
  • Abadikhah, Hossein, 1987 (författare)
  • Dynamic higher order equations
  • 2016
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The subject of this thesis is to derive and evaluate governing equations and correspondingboundary conditions for solid cylinders and rectangular plates, where the materialconstituting the cylinder or plate are governed by classical elasticity, micropolar elasticityor a functionally graded case of the previously mentioned models. This is achieved by asystematic power series expansion approach, by either adopting a generalized Hamilton'sprinciple or a direct approach.For the solid cylinders a power series expansion in the radial coordinate for the sought fields are adopted. Equations of motion together with consistent sets of end boundaryconditions are derived in a systematic fashion up to arbitrary order using a generalizedHamilton's principle. Governing equations are obtained for longitudinal, torsional, andexural modes. In the case of the rectangular plate, a power series expansion of thesought fields are adopted in the thickness coordinate. Governing equations of motion, forextensional and exural case, together with consistent sets of edge boundary conditionsare derived in a systematic fashion up to arbitrary order with use of the direct approach.Both the governing equations for the solid cylinder and the rectangular plate areasymptotically correct to all studied orders. Numerical examples are presented fordifferent sorts of problems, using exact theory, the present series expansion theories ofdifferent order, various classical theories and other newly developed approximate theories.These results cover dispersion curves, eigenfrequencies, various curves of cross sectionalquantities such as displacements, stresses and micro-rotations, as well as fixed frequencymotion due to prescribed end displacement or lateral distributed forces. The resultsillustrate that the present approach may render benchmark solutions provided higher ordertruncations are used, and act as engineering equations when using low order truncations.
  •  
9.
  • Abaravicius, Juozas (författare)
  • Demand Side Activities for Electric Load Reduction
  • 2007
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The research described in this thesis, focuses on some activities on the demand side that could reduce peak load in electricity system by using consumer flexibility i.e. by increasing the demand side response to signals coming from the energy market. The major objective is to test and analyse different strategies to reduce peak load at the demand side considering their techno-economic, environmental and behavioural aspects. Both quantitative and qualitative research methods were used, including the detailed energy use data evaluation, direct and indirect load control experiments and interviews with residential and commercial consumers and utilities. One general conclusion of this research process is that there's a lack of knowledge and information on load demand variation and its consequences both on the consumer side and the utility side. New automated interval metering technologies enable 'visibility' of electricity use, however this potentially valuable information is rarely analysed and used. Modern metering and communication systems enable utilities to perform direct load control measures and to automate demand response. As the experiments with direct load control at residential consumers show, these measures could be implemented without significant comfort losses for the consumers. However, the value of this kind of demand side actions needs to be clearly expressed or quantified both for consumers and the supplier. Indirect load control with the help of various types of pricing is possible, but needs to have more significant financial motivation for the consumers than the present offers give. The results of the analysed examples of a tariff with a load demand component indicate that consumers' electrical expenses have to be more considerably reduced if they are to significantly 'improve' the consumption patterns. Utilities, for example one of those analysed in our case studies, may not assess indirect load control as a reliable resource. Therefore the integration of direct and indirect load control measures could be an attractive solution for them. Load reduction strategies at the demand side could influence the environmental performance of an energy system by decreasing emissions and preventing the distortion of territories. Nevertheless, it should be emphasized that the environmental effects depend on the prevalent generation and transmission system and could be different on different levels - regional, national and local - as the analysis example of the Swedish case, described in this thesis, shows. Load management and demand response could be considered as a socially responsible behaviour rather than only a solution to techno-economic problems of an energy market. The results of this research showed interesting examples proving that certain residential and commercial consumers are willing to participate in demand response programs from a corporate social responsibility point of view.
  •  
10.
  • Abariute, Laura (författare)
  • Engineered nanomaterials in in vivo and in vitro models
  • 2018
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Nanotechnology and engineered nanomaterials (ENM) empower existing technologies. One of the great examples are III-V semiconductor nanowires (NW), which have a broad application range. The occupational safety and hazard organizations draw attention to ENM, as their physical and chemical characteristics differ from the ones of bulk materials. Additionally, the NW high aspect ratio geometry is of great concern, since it resembles the morphology of asbestos. Moreover, due to their small size, ENM materials are hard to detect and identify using conventional methods. During ENM technology development and large-scale production, the highest risk of human exposure is via inhalation. Therefore, we need to study how NW affect lung tissue using experimental exposure models. The work in this thesis aimed at filling the knowledge gap in ENM detection and identification, as well as understanding III-V semiconductor NW effects in in vitro and in vitro models.We have used enhanced darkfield microscopy – hyperspectral imaging method to detect and identify ceria nanoparticles in three differently prepared samples, and compared different combinations of data analysis methods. The remaining part of the thesis was devoted to the study of the III-V semiconductor NW effects on cells and tissue in vitro and in vivo. We have exposed two types of cell cultures (primary human lung (SAE) and human lung adenocarcinoma cell line (A549)) to gallium phosphide (GaP) NW. We observed that both type of cells are capable to engulf NW after 2 days, and that NW do not have any effect on the SAE and A549 cell morphology after 7 and 5 days, respectively. The NW concentrations used in this work are not toxic to A549 cells, since we did not see a change in cell mobility, viability or changes in ROS levels. After inhibiting specific endocytosis pathways in A549 cells, we showed that NW are actively taken up via phagocytosis and/or macropinocytosis.Additionally, we have performed in vivo mice exposure to GaP NW via intratracheal instillation. We have observed that NW induce an inflammation and allergic reaction of similar levels as the ones observed after exposure to carcinogenic multiwall carbon nanotubes. Additionally, we show that NW are capable to cross tissue barriers and reach distant organs after 28 days, however without introducing changes to the organ tissues. Lastly, we have performed a pilot study, where we investigated the effect of NW photodiodes on A549 cells. We observed that the presence of light inhibits cell proliferation. Furthermore, we show that the chemical make-up of the photodiodes is important, since some photodiodes dissolve in water based cell culturing media and release toxic compounds.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 11608
Typ av publikation
konstnärligt arbete (15)
Typ av innehåll
övrigt vetenskapligt/konstnärligt (11606)
populärvet., debatt m.m. (1)
refereegranskat (1)
Författare/redaktör
Jönsson, Pär, Profes ... (51)
Gustafsson, Fredrik, ... (23)
Wågberg, Lars, Profe ... (18)
Dahlquist, Erik, Pro ... (16)
Ljung, Lennart, Prof ... (16)
Söder, Lennart, Prof ... (15)
visa fler...
Lindbergh, Göran, Pr ... (15)
Skoglund, Mikael (14)
Skoglund, Mikael, Pr ... (14)
Fransson, Torsten, P ... (14)
Åbom, Mats, Professo ... (13)
Lindbergh, Göran, Pr ... (13)
Ågren, John, Profess ... (13)
Östling, Mikael, Pro ... (12)
Olofsson, Ulf, Profe ... (12)
Alvandpour, Atila, P ... (12)
Larsson, Stefan, Pro ... (12)
Zander, Jens, Profes ... (12)
Bengtsson, Ewert, Pr ... (12)
Nee, Hans-Peter, Pro ... (12)
Laue, Jan (11)
Seetharaman, Seshadr ... (11)
Bollen, Math (11)
Oelmann, Bengt, Prof ... (11)
Händel, Peter, Profe ... (11)
Palm, Björn, Profess ... (10)
Martin, Viktoria, Pr ... (10)
Engqvist, Håkan (10)
Stoica, Peter, Profe ... (10)
Delsing, Jerker, 195 ... (10)
Palm, Björn (10)
Kari, Leif, Professo ... (10)
Zander, Jens (10)
Jacobson, Staffan (10)
Jönsson, Pär (10)
Hedenqvist, Mikael, ... (10)
Johansson, Mikael, P ... (10)
Brodin, Lars-Åke, Pr ... (10)
Ansell, Anders, Prof ... (9)
Oelmann, Bengt (9)
Rönnberg, Sarah (9)
Björk, Folke, Profes ... (9)
Seetharaman, Seshadr ... (9)
Händel, Peter (9)
Fuchs, Laszlo, Profe ... (9)
Ek, Monica, professo ... (9)
Karoumi, Raid, Profe ... (9)
Tenhunen, Hannu, Pro ... (9)
Eriksson, Anders, Pr ... (9)
Leijon, Mats (9)
visa färre...
Lärosäte
Chalmers tekniska högskola (3269)
Kungliga Tekniska Högskolan (2846)
Lunds universitet (1725)
Luleå tekniska universitet (1373)
Linköpings universitet (730)
Uppsala universitet (582)
visa fler...
Mälardalens universitet (148)
Mittuniversitetet (146)
Blekinge Tekniska Högskola (121)
Umeå universitet (117)
Karlstads universitet (99)
Linnéuniversitetet (95)
Sveriges Lantbruksuniversitet (91)
Högskolan i Borås (90)
Högskolan i Gävle (76)
Jönköping University (74)
Högskolan i Halmstad (66)
Göteborgs universitet (60)
Högskolan Väst (59)
RISE (58)
Stockholms universitet (50)
Högskolan Dalarna (49)
Högskolan i Skövde (42)
Örebro universitet (24)
VTI - Statens väg- och transportforskningsinstitut (24)
Handelshögskolan i Stockholm (23)
Malmö universitet (17)
Karolinska Institutet (8)
Försvarshögskolan (6)
Högskolan Kristianstad (4)
Konstfack (2)
Södertörns högskola (2)
Stockholms konstnärliga högskola (1)
Marie Cederschiöld högskola (1)
Röda Korsets Högskola (1)
Kungl. Musikhögskolan (1)
visa färre...
Språk
Engelska (11340)
Svenska (247)
Tyska (5)
Danska (3)
Ryska (2)
Italienska (2)
visa fler...
Franska (1)
Norska (1)
Odefinierat språk (1)
Spanska (1)
Finska (1)
Polska (1)
Portugisiska (1)
Tjeckiska (1)
Nygrekiska (1)
visa färre...
Forskningsämne (UKÄ/SCB)
Teknik (11603)
Naturvetenskap (1436)
Samhällsvetenskap (338)
Medicin och hälsovetenskap (151)
Humaniora (119)
Lantbruksvetenskap (113)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy