| 1. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Available Tests to evaluate Residual Prestressing Forces in Concrete Bridges
- 2022
-
Ingår i: IABSE Symposium Prague 2022: Challenges for Existing and Oncoming Structures - Report, International Association for Bridge and Structural Engineering. - Zurich, Switzerland : International Association for Bridge and Structural Engineering. ; , s. 1123-1131
-
Konferensbidrag (refereegranskat)abstract
- The reduction of the structural capacity and eventual collapse of existing concrete bridges is often related to the loss of the initial prestressing forces. This loss can be associated to immediate or time dependent factors such as elastic shortening, creep, relaxation, loading, and cracking, among others. In addition, environmental factors can lead to corrosion of the strands with the subsequent reduction of their area, loss of bond with the concrete and additional cracking which in turn will influence the value of the residual prestress force and the bridge capacity. Therefore, the evaluation of such losses is critical in the decision-making process of defining a financial and environmental cost optimized intervention strategies (e.g., strengthening or replacement). In this paper, a detailed literature review regarding destructive and non-destructive methods for measuring the residual force in prestressed concrete bridges is carried out and used to develop a database of existing experimental tests.
|
|
| 2. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Cracking and Fatigue of Heavy Loaded Prestressed Concrete Bridge in Sweden
- 2022
-
Ingår i: IABSE Symposium Prague 2022: Challenges for Existing and Oncoming Structures - Report, International Association for Bridge and Structural Engineering. - Zürich : International Association for Bridge and Structural Engineering. ; , s. 792-799
-
Konferensbidrag (refereegranskat)abstract
- A prestressed concrete bridge was built in 1963 with BBRV cables. It has three spans and a total length of 134.8 m. Due to mining activities the bridge was loaded with trucks with a total weight of 90 ton during 2012-2014 and from 2019. Crack development has been monitored manually and from 2020 with strain gauges and LVDTs.Cracks normally vary between 0.1 to 0.3 mm in width and grow in length with time. In November 2020 some of the strain gauges on the concrete showed alarming growth and the bridge was closed for traffic. Additional strain gauges were installed on vertical reinforcement bars and an assessment was carried out of the fatigue capacity of the bridge. It was found that the new strain gauges did not indicate any growth in strain and that the fatigue capacity was sufficient. The bridge could be opened again for traffic after being closed for five weeks. Monitoring drift in the strain gauges and fatigue are discussed.
|
|
| 3. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Data Validation of Strain-Based Monitoring Systems in Low Temperature Conditions, Case Study : The Kalix Bridge
- 2023
-
Ingår i: Building for the Future: Durable, Sustainable, Resilient - Proceedings of the fib Symposium 2023 - Volume 2. - : Springer. - 9783031325106 - 9783031325113 ; , s. 986-995
-
Konferensbidrag (refereegranskat)abstract
- Over the last decades, economic growth and sustained development have enforced the need to ensure reliable and long-lasting infrastructure network to guarantee serviceability and safety. Nevertheless, detrimental effects can lead over time to insufficient structural performance under increasing service loadings and extreme events. Hence, Structural Health Monitoring (SHM) arises as a solution to cope with the need of having timely and continuous data to assess the state of crucial structural assets, such as prestressed concrete bridges. On this matter, the validation of the retrieved data becomes essential for the risk-based decision making in the assessment of bridges, where selecting the most suitable monitoring system could allow to addressed main causes to the right phenomena of deterioration during the service life of the bridge. Consistently with these efforts, this paper deals with a comparative study between the data acquired by different strain-based sensors such as Fiber optic systems (FOS) and strain gauges that were installed to monitor a proof loading test developed on a 65-year-old balanced cantilever prestressed concrete bridge located in Northern Sweden. The monitored data led to establish main differences between emerging types of monitoring systems such as FOS to the well-based strain gauges when exposed to low temperature conditions. Conclusions regarding the influencing parameters between both retrieved data are drawn when evaluating the structural response under serviceability loading conditions is performed, supporting decision makers when different levels of structural assessment are required.
|
|
| 4. |
- Agredo Chavez, Angelica Maria, et al.
(författare)
-
Structural model updating of an existing concrete bridge based on load testing and monitoring data
- 2023
-
Ingår i: Life-Cycle of Structures and Infrastructure Systems. - : Taylor & Francis Group. - 9781003323020 ; , s. 3999-4006
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The backbone of European infrastructure was built after the end of the second World War and has reached, or is near to, the end of its nominal design life. This issue urges the development of structural assessment procedures that can provide infrastructure managers the information to make decisions for repairing, upgrading, or replacement. In this paper, a methodology based on load testing and Structural Health Monitoring (SHM) for the assessment of a 65- year-old prestressed concrete bridge located in Northern Sweden is presented. The retrieved data is used to develop and calibrate structural models with different levels of data completeness. The SHM procedure includes the evaluation of material properties by diagnostics, definition of the layout and installation of the instrumentation, test execution, and data analysis. A preliminary structural model is developed based only on the original design parameters, and it is sequentially updated with monitoring data retrieved during a performed proof loading test of the bridge.
|
|
| 5. |
- Ahmed, Lamis
(författare)
-
Models for analysis of young cast and sprayed concrete subjected to impact-type loads
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The strive for a time-efficient construction process naturally put focus on the possibility of reducing the time of waiting between stages of construction, thereby minimizing the construction cost. If recently placed concrete, cast or sprayed, is exposed to impact vibrations at an early age while still in the process of hardening, damage that threatens the function of the hard concrete may occur. A waiting time when the concrete remains undisturbed, or a safe distance to the vibration source, is therefore needed. However, there is little, or no, fully proven knowledge of the length of this distance or time and there are no established guidelines for practical use. Therefore, conservative vibration limits are used for young and hardening concrete exposed to vibrations from e.g. blasting.As a first step in the dynamic analysis of a structure, the dynamic loads should always be identified and characterized. Here it is concluded that impact-type loads are the most dangerous of possible dynamic loads on young and hardening concrete. Shotcrete (sprayed concrete) on hard rock exposed to blasting and cast laboratory specimens subjected to direct mechanical impact loads have been investigated using finite element models based on the same analysis principles. Stress wave propagation is described in the same way whether it is through hard rock towards a shotcrete lining or through an element of young concrete. However, the failure modes differ for the two cases where shotcrete usually is damaged through loss of bond, partly or over larger sections that may result in shotcrete downfall. Cracking in shotcrete due to vibrations only is unusual and has not been observed during previous in situ tests. The study of shotcrete is included to demonstrate the need of specialized guidelines for cases other than for mass concrete, i.e. structural elements or concrete volumes with large dimensions in all directions.Within this project, work on evaluating and proposing analytical models are made in several steps, first with a focus on describing the behaviour of shotcrete on hard rock. It is demonstrated that wave propagation through rock towards shotcrete can be described using two-dimensional elastic finite element models in a dynamic analysis. The models must include the material properties of the rock and the accuracy of these parameters will greatly affect the results. It is possible to follow the propagation of stress waves through the rock mass, from the centre of blasting to the reflection at the shotcrete-rock interface. It is acceptable to use elastic material formulations until the strains are outside the elastic range, which thus indicates imminent material failure. The higher complexity of this type of model, compared with mechanical models using mass and spring elements, makes it possible to analyse more sophisticated geometries. Comparisons are made between numerical results and measurements from experiments in mining tunnels with ejected rock mass and shotcrete bond failure, and with measurements made during blasting for tunnel construction where rock and shotcrete remained intact. The calculated results are in good correspondence with the in situ observations and measurements, and with previous numerical modelling results. Examples of preliminary recommendations for practical use are given and it is demonstrated how the developed models and suggested analytical technique can be used for further detailed investigations.The modelling concept has also been used for analysis of impact loaded beams and concrete prisms modelled with 3D solid elements. As a first analysis step, an elastic material model was used to validate laboratory experiments with hammer-loaded concrete beams. The laboratory beam remained un-cracked during the experiments, and thus it was possible to achieve a good agreement using a linear elastic material model for fully hardened concrete. The model was further developed to enable modelling of cracked specimens. For verification of the numerical results, earlier laboratory experiments with hammer impacted smaller prisms of young concrete were chosen. A comparison between results showed that the laboratory tests can be reproduced numerically and those free vibration modes and natural frequencies of the test prisms contributed to the strain concentrations that gave cracking at high loads. Furthermore, it was investigated how a test prism modified with notches at the middle section would behave during laboratory testing. Calculated results showed that all cracking would be concentrated to one crack with a width equal to the sum of the multiple cracks that develop in un-notched prisms. In laboratory testing, the modified prism will provide a more reliable indication of when the critical load level is reached.This project has been interdisciplinary, combining structural dynamics, finite element modelling, concrete material technology, construction technology and rock support technology. It is a continuation from previous investigations of the effect on young shotcrete from blasting vibrations but this perspective has been widened to also include young, cast concrete. The outcome is a recommendation for how dynamic analysis of young concrete, cast and sprayed, can be carried out with an accurate description of the effect from impact-type loads. The type of numerical models presented and evaluated will provide an important tool for the work towards guidelines for practical use in civil engineering and concrete construction work. Some recommendations on safe distances and concrete ages are given, for newly cast concrete elements or mass concrete and for newly sprayed shotcrete on hard rock.
|
|
| 6. |
|
|
| 7. |
- Ansell, Anders, et al.
(författare)
-
Kap 14 - Hållfasthet
- 2021
-
Ingår i: Betonghandbok Material – Del II. - Stockholm : AB Svensk Byggtjänst. ; , s. 27-188
-
Bokkapitel (populärvet., debatt m.m.)
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
