| 1. |
- Jansson, Ronnie, et al.
(author)
-
Functionalized silk assembled from a recombinant spider silk fusion protein (Z-4RepCT) produced in the methylotrophic yeast Pichia pastoris
- 2016
-
In: Biotechnology Journal. - : Wiley-VCH Verlagsgesellschaft. - 1860-6768 .- 1860-7314. ; 11:5, s. 687-699
-
Journal article (peer-reviewed)abstract
- Functional biological materials are a growing research area with potential applicability in medicine and biotechnology. Using genetic engineering, the possibility to introduce additional functions into spider silk-based materials has been realized. Recently, a recombinant spider silk fusion protein, Z-4RepCT, was produced intracellularly in Escherichia coli and could after purification self-assemble into silk-like fibers with ability to bind antibodies via the IgG-binding Z domain. In this study, the use of the methylotrophic yeast Pichia pastoris for production of Z-4RepCT has been investigated. Temperature, pH and production time were influencing the amount of soluble Z-4RepCT retrieved from the extracellular fraction. Purification of secreted Z-4RepCT resulted in a mixture of full-length and degraded silk proteins that failed to self-assemble into fibers. A position in the C-terminal domain of 4RepCT was identified as being subjected to proteolytic cleavage by proteases in the Pichia culture supernatant. Moreover, the C-terminal domain was subjected to glycosylation during production in P. pastoris. These observed alterations of the CT domain are suggested to contribute to the failure in fiber assembly. As alternative approach, Z-4RepCT retrieved from the intracellular fraction, which was less degraded, was used and shown to retain ability to assemble into silk-like fibers after enzymatic deglycosylation.
|
|
| 2. |
- McKee, Lauren S., et al.
(author)
-
A GH115 alpha-glucuronidase from Schizophyllum commune contributes to the synergistic enzymatic deconstruction of softwood glucuronoarabinoxylan
- 2016
-
In: Biotechnology for Biofuels. - : BioMed Central. - 1754-6834 .- 1754-6834. ; 9
-
Journal article (peer-reviewed)abstract
- Background: Lignocellulosic biomass from softwood represents a valuable resource for the production of biofuels and bio-based materials as alternatives to traditional pulp and paper products. Hemicelluloses constitute an extremely heterogeneous fraction of the plant cell wall, as their molecular structures involve multiple monosaccharide components, glycosidic linkages, and decoration patterns. The complete enzymatic hydrolysis of wood hemicelluloses into monosaccharides is therefore a complex biochemical process that requires the activities of multiple degradative enzymes with complementary activities tailored to the structural features of a particular substrate. Glucuronoarabinoxylan (GAX) is a major hemicellulose component in softwood, and its structural complexity requires more enzyme specificities to achieve complete hydrolysis compared to glucuronoxylans from hardwood and arabinoxylans from grasses. Results: We report the characterisation of a recombinant alpha-glucuronidase (Agu115) from Schizophyllum commune capable of removing (4-O-methyl)-glucuronic acid ((Me) GlcA) residues from polymeric and oligomeric xylan. The enzyme is required for the complete deconstruction of spruce glucuronoarabinoxylan (GAX) and acts synergistically with other xylan-degrading enzymes, specifically a xylanase (Xyn10C), an alpha-l-arabinofuranosidase (AbfA), and a beta-xylosidase (XynB). Each enzyme in this mixture showed varying degrees of potentiation by the other activities, likely due to increased physical access to their respective target monosaccharides. The exo-acting Agu115 and AbfA were unable to remove all of their respective target side chain decorations from GAX, but their specific activity was significantly boosted by the addition of the endo-Xyn10C xylanase. We demonstrate that the proposed enzymatic cocktail (Agu115 with AbfA, Xyn10C and XynB) achieved almost complete conversion of GAX to arabinofuranose (Araf), xylopyranose (Xylp), and MeGlcA monosaccharides. Addition of Agu115 to the enzymatic cocktail contributes specifically to 25 % of the conversion. However, traces of residual oligosaccharides resistant to this combination of enzymes were still present after deconstruction, due to steric hindrances to enzyme access to the substrate. Conclusions: Our GH115 alpha-glucuronidase is capable of finely tailoring the molecular structure of softwood GAX, and contributes to the almost complete saccharification of GAX in synergy with other exo- and endo-xylan-acting enzymes. This has great relevance for the cost-efficient production of biofuels from softwood lignocellulose.
|
|
| 3. |
- Svensson, Sofie, et al.
(author)
-
Fungal textiles : Wet spinning of fungal microfibers to produce monofilament yarns
- 2021
-
In: Sustainable Materials and Technologies. - : Elsevier BV. - 2214-9937. ; 28
-
Journal article (peer-reviewed)abstract
- The cell wall of a zygomycetes fungus was successfully wet spun into monofilament yarns and demonstrated as a novel resource for production of sustainable textiles. Furthermore, the fungus could be cultivated on bread waste, an abundant food waste with large negative environmental impact if not further utilized. Rhizopus delemar was first cultivated in bread waste in a bubble column bioreactor. The fungal cell wall collected through alkali treatment of fungal biomass contained 36 and 23% glucosamine and N-acetyl glucosamine representing chitosan and chitin in the cell wall, respectively. The amino groups of chitosan were protonated by utilizing acetic or lactic acid. This resulted in the formation of a uniform hydrogel of fungal microfibers. The obtained hydrogel was wet spun into an ethanol coagulation bath to form an aggregated monofilament, which was finally dried. SEM images confirmed the alignment of fungal microfibers along the monofilament axis. The wet spun monofilaments had tensile strengths up to 69.5 MPa and Young's modulus of 4.97 GPa. This work demonstrates an environmentally benign procedure to fabricate renewable fibers from fungal cell wall cultivated on abundant food waste, which opens a window to creation of sustainable fungal textiles.
|
|
| 4. |
- Gullfot, Fredrika, 1967-
(author)
-
Synthesis of xyloglucan oligo- and polysaccharides with glycosynthase technology
- 2009
-
Licentiate thesis (other academic/artistic)abstract
- Xyloglucans are polysaccharides found as storage polymers in seeds and tubers, and as cross-linking glycans in the cell wall of plants. Their structure is complex with intricate branching patterns, which contribute to the physical properties of the polysaccharide including its binding to and interaction with other glycans such as cellulose. Xyloglucan is widely used in bulk quantities in the food, textile and paper making industries. With an increasing interest in technically more advanced applications of xyloglucan, such as novel biocomposites, there is a need to understand and control the properties and interactions of xyloglucan with other compounds, to decipher the relationship between xyloglucan structure and function, and in particular the effect of different branching patterns. However, due to the structural heterogeneity of the polysaccharide as obtained from natural sources, relevant studies have not been possible to perform in practise. This fact has stimulated an interest in synthetic methods to obtain xyloglucan mimics and analogs with well-defined structure and decoration patterns. Glycosynthases are hydrolytically inactive mutant glycosidases that catalyse the formation of glycosidic linkages between glycosyl fluoride donors and glycoside acceptors. Since its first conception in 1998, the technology is emerging as a useful tool in the synthesis of large, complex polysaccharides. This thesis presents the generation and characterisation of glycosynthases based on xyloglucanase scaffolds for the synthesis of well-defined homogenous xyloglucan oligo- and polysaccharides with regular substitution patterns.
|
|
| 5. |
- Zhou, Yongjin, 1984, et al.
(author)
-
Production of fatty acid-derived oleochemicals and biofuels by synthetic yeast cell factories
- 2016
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 7, s. 11709-11709
-
Journal article (peer-reviewed)abstract
- Sustainable production of oleochemicals requires establishment of cell factory platform strains. The yeast Saccharomyces cerevisiae is an attractive cell factory as new strains can be rapidly implemented into existing infrastructures such as bioethanol production plants. Here we show high-level production of free fatty acids (FFAs) in a yeast cell factory, and the production of alkanes and fatty alcohols from its descendants. The engineered strain produces up to 10.4 g/L of FFAs, which is the highest reported titre to date. Furthermore, through screening of specific pathway enzymes, endogenous alcohol dehydrogenases and aldehyde reductases, we reconstruct efficient pathways for conversion of fatty acids to alkanes (0.8 mg /L) and fatty alcohols (1.5 g/L), to our knowledge the highest titres reported in S. cerevisiae. This should facilitate the construction of yeast cell factories for production of fatty acids derived products and even aldehyde-derived chemicals of high value.
|
|
| 6. |
- Alm, Tove, 1977-
(author)
-
Interaction engineered three-helix bundle domains for protein recovery and detection
- 2010
-
Doctoral thesis (other academic/artistic)abstract
- HTML clipboard The great advances in DNA technology, e.g. sequencing and recombinant DNA techniques, have given us the genetic information and the tools needed to effectively produce recombinant proteins. Recombinant proteins are valuable means in biotechnological applications and are also emerging as alternatives in therapeutic applications. Traditionally, monoclonal antibodies have been the natural choice for biotechnological and therapeutic applications due to their ability to bind a huge range of different molecules and their natural good affinity. However, the large size of antibodies (150 kDa) limits tissue penetration and the recombinant expression is complicated. Therefore, alternative binders with smaller sizes have been derived from antibodies and alternative scaffolds.In this thesis, two structurally similar domains, Zbasic and ABDz1, have been used as purification tags in different contexts. They are both three-helical bundles and derived from bacterial surface domains, but share no sequence homology. Furthermore, by redesign of the scaffold used for ABDz1, a molecule intended for drug targeting with extended in-vivo half-life has been engineered. In Papers I and II, the poly-cationic tag Zbasic is explored and evaluated. Paper I describes the successful investigation of Zbasic as a purification handle under denaturating conditions. Moreover, Zbasic is evaluated as an interaction domain in matrixassisted refolding. Two different proteins were successfully refolded using the same setup without individual optimization. In Paper II, Zbasic is further explored as a purification handle under non-native conditions in a multi-parallel setup. In total, 22 proteins with varying characteristics are successfully purified using a multi-parallel protein purification protocol and a robotic system. Without modifications, the system can purify up to 60 proteins without manual handling. Paper I and II clearly demonstrate that Zbasic can be used as an interaction domain in matrix-assisted refolding and that it offers a good alternative to the commonly used His6-tag under denaturating conditions. In paper III, the small bifunctional ABDz1 is selected from a phage display library. Endowed with two different binding interfaces, ABDz1 is capable of binding both the HSA-sepharose and the protein A-derived MabSelect SuRe-matrix. The bifunctionality of the domain is exploited in an orthogonal affinity setup. Three target proteins are successfully purified using the HSA-matrix and the MabSelect SuRe-matrix. Furthermore, the purity of the target proteins is effectively improved by combining the two chromatographic steps. Thus, paper III shows that the small ABDz1 can be used as an effective purification handle and dual affinity tag without target specific optimization. Paper IV describes the selection and affinity maturation of small bispecific drug-targeting molecules. First generation binders against tumor necrosis factor-α are selected using phage display. Thereafter on-cell surface display and flow cytometry is used to select second-generation binders. The binding to tumor necrosis factor-α is improved up to 30 times as compared to the best first generation binder, and a 6-fold improvement of the binding strength was possible with retained HSA affinity. Paper III and IV clearly demonstrate that dual interaction surfaces can successfully be grafted on a small proteinaceous domain, and that the strategy in paper IV can be used for dual selection of bifunctional binders.
|
|
| 7. |
- Wang, Guokun, 1988, et al.
(author)
-
RNAi expression tuning, microfluidic screening, and genome recombineering for improved protein production in Saccharomyces cerevisiae
- 2019
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 116:19, s. 9324-9332
-
Journal article (peer-reviewed)abstract
- The cellular machinery that supports protein synthesis and secretion lies at the foundation of cell factory-centered protein production. Due to the complexity of such cellular machinery, the challenge in generating a superior cell factory is to fully exploit the production potential by finding beneficial targets for optimized strains, which ideally could be used for improved secretion of other proteins. We focused on an approach in the yeast Saccharomyces cerevisiae that allows for attenuation of gene expression, using RNAi combined with high-throughput microfluidic single-cell screening for cells with improved protein secretion. Using direct experimental validation or enrichment analysis-assisted characterization of systematically introduced RNAi perturbations, we could identify targets that improve protein secretion. We found that genes with functions in cellular metabolism (YDC1, AAD4, ADE8, and SDH1), protein modification and degradation (VPS73, KTR2, CNL1, and SSA1), and cell cycle (CDC39), can all impact recombinant protein production when expressed at differentially down-regulated levels. By establishing a workflow that incorporates Cas9-mediated recombineering, we demonstrated how we could tune the expression of the identified gene targets for further improved protein production for specific proteins. Our findings offer a high throughput and semirational platform design, which will improve not only the production of a desired protein but even more importantly, shed additional light on connections between protein production and other cellular processes.
|
|
| 8. |
- Magnusson, Mikael, et al.
(author)
-
Bioconversion of food waste to biocompatible wet-laid fungal films
- 2022
-
In: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 216
-
Journal article (peer-reviewed)abstract
- The fungus Rhizopus delemar was grown on bread waste in a submerged cultivation process and wet-laid into films. Alkali or enzyme treatments were used to isolate the fungal cell wall. A heat treatment was also applied to deactivate biological activity of the fungus. Homogenization of fungal biomass was done by an iterative ultrafine grinding process. Finally, the biomass was cast into films by a wet-laid process. Ultrafine grinding resulted in densification of the films. Fungal films showed tensile strengths of up to 18.1 MPa, a Young's modulus of 2.3 GPa and a strain at break of 1.4%. Highest tensile strength was achieved using alkali treatment, with SEM analysis showing a dense and highly organized structure. In contrast, less organized structures were obtained using enzymatic or heat treatments. A cell viability assay and fluorescent staining confirmed the biocompatibility of the films. A promising route for food waste valorization to sustainable fungal wet-laid films was established. © 2022 The Authors
|
|
| 9. |
- Schwarz, Hubert, et al.
(author)
-
Integrated continuous biomanufacturing on pilot scale for acid-sensitive monoclonal antibodies
- 2022
-
In: Biotechnology and Bioengineering. - : Wiley. - 0006-3592 .- 1097-0290.
-
Journal article (peer-reviewed)abstract
- In this study, we demonstrated the first, to our knowledge, integrated continuous bioprocess (ICB) designed for the production of acid-sensitive monoclonal antibodies, prone to aggregate at low pH, on pilot scale. A high cell density perfusion culture, stably maintained at 100 × 106 cells/ml, was integrated with the downstream process, consisting of a capture step with the recently developed Protein A ligand, ZCa; a solvent/detergent-based virus inactivation; and two ion-exchange chromatography steps. The use of a mild pH in the downstream process makes this ICB suitable for the purification of acid-sensitive monoclonal antibodies. Integration and automation of the downstream process were achieved using the Orbit software, and the same equipment and control system were used in initial small-scale trials and the pilot-scale downstream process. High recovery yields of around 90% and a productivity close to 1 g purified antibody/L/day were achieved, with a stable glycosylation pattern and efficient removal of impurities, such as host cell proteins and DNA. Finally, negligible levels of antibody aggregates were detected owing to the mild conditions used throughout the process. The present work paves the way for future industrial-scale integrated continuous biomanufacturing of all types of antibodies, regardless of acid stability.
|
|
| 10. |
- Kroll, Jens, et al.
(author)
-
A novel plasmid addiction system for large-scale production of cyanophycin in Escherichia coli using mineral salts medium
- 2011
-
In: Applied Microbiology and Biotechnology. - : Springer Science and Business Media LLC. - 0175-7598 .- 1432-0614. ; 89:3, s. 593-604
-
Journal article (peer-reviewed)abstract
- Introduction: Hitherto the production of the biopolymer cyanophycin (CGP) using recombinant Escherichia coli strains and cheap mineral salts medium yielded only trace amounts of CGP (<0.5%, w/w) of the cell dry matter (CDM). This was probably due to the instability of the plasmids encoding the cyanophycin synthetase. Material and methods: In this study, we developed an anabolism-based media-dependent plasmid addiction system (PAS) to enhance plasmid stability, and we established a process based on a modified mineral salts medium yielding a CGP content of 42% (w/w) at the maximum without the addition of amino acids to the medium for the first time. This PAS is based on different lysine biosynthesis pathways and consists of two components: (1) a knockout of the chromosomal dapE disrupts the native succinylase pathway in E. coli and (2) the complementation by the plasmid-encoded artificial aminotransferase pathway mediated by the dapL gene from Synechocystis sp. PCC 6308, which allows the synthesis of the essential lysine precursor L,L-2,6-diaminopimelate. In addition, this plasmid also harbors cphAC595S, an engineered cyanophycin synthetase gene responsible for CGP production. Results: Cultivation experiments in Erlenmeyer flask and also in bioreactors in mineral salts medium without antibiotics revealed an at least 4.5-fold enhanced production of CGP in comparison to control cultivations without PAS. Discussion: Fermentation experiments with culture volume of up to 400 l yielded a maximum of 18% CGP (w/w) and a final cell density of 15.2 g CDM/l. Lactose was used constantly as an effective inducer and carbon source. Thus, we present a convenient option to produce CGP with E. coli at a technical scale without the need to add antibiotics or amino acids using the mineral salts medium designed in this study.
|
|
