| 1. |
- Alinejad, M., et al.
(författare)
-
Lignin-based polyurethanes : Opportunities for bio-based foams, elastomers, coatings and adhesives
- 2019
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- Polyurethane chemistry can yield diverse sets of polymeric materials exhibiting a widerange of properties for various applications and market segments. Utilizing lignin as a polyol presentsan opportunity to incorporate a currently underutilized renewable aromatic polymer into theseproducts. In this work, we will review the current state of technology for utilizing lignin as a polyolreplacement in different polyurethane products. This will include a discussion of lignin structure,diversity, and modification during chemical pulping and cellulosic biofuels processes, approachesfor lignin extraction, recovery, fractionation, and modification/functionalization. We will discussthe potential of incorporation of lignins into polyurethane products that include rigid and flexiblefoams, adhesives, coatings, and elastomers. Finally, we will discuss challenges in incorporating ligninin polyurethane formulations, potential solutions and approaches that have been taken to resolvethose issues.
|
|
| 2. |
- Andersson, Christian, et al.
(författare)
-
Effect of different carbon sources on the production of succinic acid using metabolically engineered Escherichia coli
- 2007
-
Ingår i: Biotechnology progress (Print). - : Wiley. - 8756-7938 .- 1520-6033. ; 23:2, s. 381-388
-
Tidskriftsartikel (refereegranskat)abstract
- Succinic acid (SA) is an important platform molecule in the synthesis of a number of commodity and specialty chemicals. In the present work, dual-phase batch fermentations with the E. coli strain AFP184 were performed using a medium suited for large-scale industrial production of SA. The ability of the strain to ferment different sugars was investigated. The sugars studied were sucrose, glucose, fructose, xylose, and equal mixtures of glucose and fructose and glucose and xylose at a total initial sugar concentration of 100 g L-1. AFP184 was able to utilize all sugars and sugar combinations except sucrose for biomass generation and succinate production. For sucrose as a substrate no succinic acid was produced and none of the sucrose was metabolized. The succinic acid yield from glucose (0.83 g succinic acid per gram glucose consumed anaerobically) was higher than the yield from fructose (0.66 g g-1). When using xylose as a carbon source, a yield of 0.50 g g-1 was obtained. In the mixed-sugar fermentations no catabolite repression was detected. Mixtures of glucose and xylose resulted in higher yields (0.60 g g-1) than use of xylose alone. Fermenting glucose mixed with fructose gave a lower yield (0.58 g g-1) than fructose used as the sole carbon source. The reason is an increased pyruvate production. The pyruvate concentration decreased later in the fermentation. Final succinic acid concentrations were in the range of 25-40 g L-1. Acetic and pyruvic acid were the only other products detected and accumulated to concentrations of 2.7-6.7 and 0-2.7 g L-1. Production of succinic acid decreased when organic acid concentrations reached approximately 30 g L-1. This study demonstrates that E. coli strain AFP184 is able to produce succinic acid in a low cost medium from a variety of sugars with only small amounts of byproducts formed.
|
|
| 3. |
- Andersson, Christian, et al.
(författare)
-
Inhibition of succinic acid production in metabolically engineered Escherichia Coli by neutralizing agent, organic acids, and osmolarity
- 2009
-
Ingår i: Biotechnology progress (Print). - : Wiley. - 8756-7938 .- 1520-6033. ; 25:1, s. 116-123
-
Tidskriftsartikel (refereegranskat)abstract
- The economical viability of biochemical succinic acid production is a result of many processing parameters including final succinic acid concentration, recovery of succinate, and the volumetric productivity. Maintaining volumetric productivities >2.5 g L-1 h(-1) is important if production of succinic acid from. renewable resources should be competitive. In this work, the effects of organic acids, osmolarity, and neutralizing agent (NH4OH, KOH, NaOH, K2CO3, and Na2CO3) on the fermentative succinic acid production by Escherichia coli AFP184 were investigated. The highest concentration of succinic acid, 77 g L-1. was obtained with Na2O3. In general, irrespective of the base used, succinic acid productivity per viable cell was significantly reduced as the concentration of the produced acid increased. Increased osmolarity resulting from base addition during succinate production only marginally affected the productivity per viable cell. Addition of the osmoprotectant glycine betaine to cultures resulted in an increased aerobic growth rate and anaerobic glucose consumption rate, but decreased succinic acid yield. When using NH4OH productivity completely ceased at a succinic acid concentration of similar to 40 g L-1. Volumetric productivities remained at 2.5 g L-1 h(-1) for tip to 10 h longer when K- or Na-bases where used instead of NH4OH. The decrease in cellular succinic acid productivity observed during the anaerobic phase was found to be due to increased organic acid concentrations rather than medium osmolarity.
|
|
| 4. |
- Bansal, Namita, et al.
(författare)
-
Cell wall-associated transition metals improve alkaline-oxidative pretreatment in diverse hardwoods
- 2016
-
Ingår i: Green Chemistry. - : Royal Society of Chemistry (RSC). - 1463-9262 .- 1463-9270. ; 18:5, s. 1405-1415
-
Tidskriftsartikel (refereegranskat)abstract
- The responses of four diverse hardwoods (hybrid poplar, silver birch, hybrid aspen, and sugar maple) to alkaline hydrogen peroxide (AHP) pretreated at ambient temperature and pressure were analyzed to gain a deeper understanding of the cell wall properties that contribute to differences in enzymatic hydrolysis efficacy following alkaline-oxidative pretreatment. The enzymatic hydrolysis yields of these diverse hardwoods increased significantly with increasing the cell wall-associated, redox-active transition metal content. These increases in hydrolysis yields were directly correlated with improved delignification. Furthermore, we demonstrated that these improvements in hydrolysis yields could be achieved either through elevated levels of naturally-occurring metals, namely Cu, Fe, and Mn, or by the addition of a homogeneous transition metal catalyst (e.g. Cu 2,2′-bipyridine complexes) capable of penetrating into the cell wall matrix. Removal of naturally-occurring cell wall-associated transition metals by chelation resulted in substantial decreases in the hydrolysis yields following AHP pretreatment, while re-addition of metals in the form of Cu 2,2′-bipyridine complexes and to a limited extent Fe 2,2′-bipyridine complexes prior to pretreatment restored the improved hydrolysis yields. Glycome profiles showed improved extractability of xylan, xyloglucan, and pectin epitopes with increasing hydrolysis yields for the diverse hardwoods subjected to the alkaline-oxidative pretreatment, demonstrating that the strength of association between cell wall matrix polymers decreased as a consequence of improved delignification
|
|
| 5. |
|
|
| 6. |
- Berglund, Kris, et al.
(författare)
-
Fermentation-Based Building Blocks for Renewable Resource-Based Surfactants
- 2010
-
Ingår i: Surfactants from renewable resources. - Chichester : John Wiley & Sons Ltd. - 9780470760413 ; , s. 127-141
-
Bokkapitel (refereegranskat)abstract
- 'new' top-ranked building blocks; Citric acid recovery from fermentation broths and CaCO3 precipitation; Citric, acetic and lactic acid - top three industrial carboxylic acids; Fermentation-based building blocks for renewable resource-based surfactants; Fermentation-based building blocks for surfactants; Filamentous fungi, Aspergillus niger and Candida yeast strains; New fermentation-based building blocks; Organic acid metabolites - as hydrophilic moiety; Sulfonates - largest market share of anionic surfactants; Sulfosuccinate class of surfactants
|
|
| 7. |
- Bhalla, Aditya, et al.
(författare)
-
Effective alkaline metal-catalyzed oxidative delignification of hybrid poplar
- 2016
-
Ingår i: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834 .- 1754-6834. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundStrategies to improve copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment of hybrid poplar were investigated. These improvements included a combination of increasing hydrolysis yields, while simultaneously decreasing process inputs through (i) more efficient utilization of H2O2 and (ii) the addition of an alkaline extraction step prior to the metal-catalyzed AHP pretreatment. We hypothesized that utilizing this improved process could substantially lower the chemical inputs needed during pretreatment.ResultsHybrid poplar was pretreated utilizing a modified process in which an alkaline extraction step was incorporated prior to the Cu-AHP treatment step and H2O2 was added batch-wise over the course of 10 h. Our results revealed that the alkaline pre-extraction step improved both lignin and xylan solubilization, which ultimately led to improved glucose (86 %) and xylose (95 %) yields following enzymatic hydrolysis. An increase in the lignin solubilization was also observed with fed-batch H2O2 addition relative to batch-only addition, which again resulted in increased glucose and xylose yields (77 and 93 % versus 63 and 74 %, respectively). Importantly, combining these strategies led to significantly improved sugar yields (96 % glucose and 94 % xylose) following enzymatic hydrolysis. In addition, we found that we could substantially lower the chemical inputs (enzyme, H2O2, and catalyst), while still maintaining high product yields utilizing the improved Cu-AHP process. This pretreatment also provided a relatively pure lignin stream consisting of ≥90 % Klason lignin and only 3 % xylan and 2 % ash following precipitation. Two-dimensional heteronuclear single-quantum coherence (2D HSQC) NMR and size-exclusion chromatography demonstrated that the solubilized lignin was high molecular weight (Mw ≈ 22,000 Da) and only slightly oxidized relative to lignin from untreated poplar.ConclusionsThis study demonstrated that the fed-batch, two-stage Cu-AHP pretreatment process was effective in pretreating hybrid poplar for its conversion into fermentable sugars. Results showed sugar yields near the theoretical maximum were achieved from enzymatically hydrolyzed hybrid poplar by incorporating an alkaline extraction step prior to pretreatment and by efficiently utilizing H2O2 during the Cu-AHP process. Significantly, this study reports high sugar yields from woody biomass treated with an AHP pretreatment under mild reaction conditions.
|
|
| 8. |
- Bhalla, Aditya, et al.
(författare)
-
Engineered Lignin in Poplar Biomass Facilitates Cu-Catalyzed Alkaline-Oxidative
- 2018
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 6:3, s. 2932-2941
-
Tidskriftsartikel (refereegranskat)abstract
- Both untransformed poplar and genetically modified “zip-lignin” poplar, in which additional ester bonds were introduced into the lignin backbone, were subjected to mild alkaline and copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment. Our hypothesis was that the lignin in zip-lignin poplar would be removed more easily than lignin in untransformed poplar during this alkaline pretreatment, resulting in higher sugar yields following enzymatic hydrolysis. We observed improved glucose and xylose hydrolysis yields for zip-lignin poplar compared to untransformed poplar following both alkaline-only pretreatment (56% glucose yield for untransformed poplar compared to 67% for zip-lignin poplar) and Cu-AHP pretreatment (77% glucose yield for untransformed poplar compared to 85% for zip-lignin poplar). Compositional analysis, glycome profiling, and microscopy all supported the notion that the ester linkages increase delignification and improve sugar yields. Essentially no differences were noted in the molecular weight distributions of solubilized lignins between the zip-lignin poplar and the control line. Significantly, when zip-lignin poplar was utilized as the feedstock, hydrogen peroxide, catalyst, and enzyme loadings could all be substantially reduced while maintaining high sugar yields.
|
|
| 9. |
- Bhalla, Aditya, et al.
(författare)
-
Integrated experimental and technoeconomic evaluation of two-stage Cu-catalyzed alkaline–oxidative pretreatment of hybrid poplar
- 2018
-
Ingår i: Biotechnology for Biofuels. - : Springer. - 1754-6834 .- 1754-6834. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- When applied to recalcitrant lignocellulosic feedstocks, multi-stage pretreatments can provide more processing flexibility to optimize or balance process outcomes such as increasing delignification, preserving hemicellulose, and maximizing enzymatic hydrolysis yields. We previously reported that adding an alkaline pre-extraction step to a copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in improved sugar yields, but the process still utilized relatively high chemical inputs (catalyst and H2O2) and enzyme loadings. We hypothesized that by increasing the temperature of the alkaline pre-extraction step in water or ethanol, we could reduce the inputs required during Cu-AHP pretreatment and enzymatic hydrolysis without significant loss in sugar yield. We also performed technoeconomic analysis to determine if ethanol or water was the more cost-effective solvent during alkaline pre-extraction and if the expense associated with increasing the temperature was economically justified.
|
|
| 10. |
- Bhalla, Aditya, et al.
(författare)
-
Performance of three delignifying pretreatments on hardwoods: hydrolysis yields, comprehensive mass balances, and lignin properties
- 2019
-
Ingår i: Biotechnology for Biofuels. - : BioMed Central (BMC). - 1754-6834 .- 1754-6834. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundIn this work, three pretreatments under investigation at the DOE Bioenergy Research Centers (BRCs) were subjected to a side-by-side comparison to assess their performance on model bioenergy hardwoods (a eucalyptus and a hybrid poplar). These include co-solvent-enhanced lignocellulosic fractionation (CELF), pretreatment with an ionic liquid using potentially biomass-derived components (cholinium lysinate or [Ch][Lys]), and two-stage Cu-catalyzed alkaline hydrogen peroxide pretreatment (Cu-AHP). For each of the feedstocks, the pretreatments were assessed for their impact on lignin and xylan solubilization and enzymatic hydrolysis yields as a function of enzyme loading. Lignins recovered from the pretreatments were characterized for polysaccharide content, molar mass distributions, β-aryl ether content, and response to depolymerization by thioacidolysis.ResultsAll three pretreatments resulted in significant solubilization of lignin and xylan, with the CELF pretreatment solubilizing the majority of both biopolymer categories. Enzymatic hydrolysis yields were shown to exhibit a strong, positive correlation with the lignin solubilized for the low enzyme loadings. The pretreatment-derived solubles in the [Ch][Lys]-pretreated biomass were presumed to contribute to inhibition of enzymatic hydrolysis in the eucalyptus as a substantial fraction of the pretreatment liquor was carried forward into hydrolysis for this pretreatment. The pretreatment-solubilized lignins exhibited significant differences in polysaccharide content, molar mass distributions, aromatic monomer yield by thioacidolysis, and β-aryl ether content. Key trends include a substantially higher polysaccharide content in the lignins recovered from the [Ch][Lys] pretreatment and high β-aryl ether contents and aromatic monomer yields from the Cu-AHP pretreatment. For all lignins, the 13C NMR-determined β-aryl ether content was shown to be correlated with the monomer yield with a second-order functionality.ConclusionsOverall, it was demonstrated that the three pretreatments highlighted in this study demonstrated uniquely different functionalities in reducing biomass recalcitrance and achieving higher enzymatic hydrolysis yields for the hybrid poplar while yielding a lignin-rich stream that may be suitable for valorization. Furthermore, modification of lignin during pretreatment, particularly cleavage of β-aryl ether bonds, is shown to be detrimental to subsequent depolymerization.
|
|
