| 1. |
- Kasiuliene, Alfreda, et al.
(författare)
-
Hydrothermal carbonisation of peat-based spent sorbents loaded with metal(loid)s
- 2019
-
Ingår i: Environmental Science and Pollution Research. - : Springer. - 0944-1344 .- 1614-7499. ; 26:23, s. 23730-23738
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrothermal carbonisation (HTC) is a wet and relatively low-temperature process where, under autogenous pressures, biomass undergoes a chain of reactions leading to the defragmentation of organic matter. As well as its other uses (e.g. for producing low-cost carbon-based nano-compounds), HTC is utilised for the treatment of wet wastes, such as manure and biosludge. This study aimed to determine if hydrothermal carbonisation is a feasible treatment method for spent sorbents that are highly enriched with arsenic, chromium, copper, and zinc. The chemical properties of hydrochar and process liquid were evaluated after HTC treatment, where peat-based spent sorbents were carbonised at 230 °C for 3 h. Analysis of Fourier transform-infrared spectra revealed that during HTC, the oxygenated bonds of ethers, esters, and carboxylic groups were cleaved, and low-molecular-weight organic fragments were dissolved in the process liquid. A large fraction of arsenic (up to 62%), copper (up to 25%), and zinc (up to 36%) were transferred from the solids into the process water. Leaching of these elements from the hydrochars increased significantly in comparison with the spent sorbents.
|
|
| 2. |
- Kasiuliene, Alfreda
(författare)
-
Peat Coated with Iron Oxides : Purification of Metal(loid)-Contaminated Water and Treatment of the Spent Adsorbent
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In Sweden due to the industrial activities, such as wood impregnation, multiple point sources of arsenic (As) contamination in soil and water bodies are scattered over the country. Metals, such as chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), cadmium (Cd) or zinc (Zn) at varying concentrations are usually present as well. Since adsorption is a common method to purify contaminated water, research and development of adsorbents have been actively carried out in the last few decades. However, seldom spent sorbent is safely handled afterwards and often end up in landfill, thus creating new problems and posing new risks to humans and environment.The aim of this study was to develop a waste-based adsorbent for simultaneous removal of As and associated metals: Cr, Cu and Zn, and to analyse sustainable ways how to manage the spent adsorbent without creating secondary pollution.In the model system two well-establish adsorbents: Fe oxides (deriving from FeCl3) and peat (waste-based), were combined and the concept of simultaneous removal of cationic and anionic contaminants was tested in a batch adsorption experiment. Due to Fe coating, removal of As and Cr increased by 80% and 30%, respectively, as compared to non-coated peat. Removal of Cu and Zn was higher (up to 15%) on non-coated peat than on Fe-coated peat. Similar results were obtained in the up-scaled column adsorption experiment, where Fe salt was substituted with a waste-based Fe hydrosol. Within the same pH environment (pH=5), Fe-coated peat effectively adsorbed all four investigated contaminants (As, Cr, Cu and Zn). Non-coated peat was effective for Cr, Cu and Zn. While, Fe oxides (coated on sand) adsorbed only As.Three management strategies for spent adsorbents, obtained after column adsorption experiment, were investigated in this study. i) Long-term deposit in a landfill was simulated by exposing spent adsorbents to a reducing environment and evaluating metal(loid) leaching. Leaching of As increased manifold (up to 60% in a 200-day experiment) as compared to the standardized batch leaching experiment under oxidizing conditions. It was determined that about one third of As(V) was reduced to As(III), which is more mobile and toxic. ii) Valorisation of the spent adsorbent was attempted through hydrothermal carbonisation. It was expected that obtained hydrochar could be used as a beneficial soil amendment. However, treatment resulted in the process liquid and the hydrochar both having high loads of As, Cu and Zn. Additional treatment of process water and hydrochar imply higher management costs for spent adsorbents. iii) Possibility of thermal destruction was investigated by combusting spent adsorbents. After the treatment volume of the waste (ash) was by 80-85% smaller as compared to spent adsorbents. Combustion at higher temperature (1100 °C vs 850 °C) resulted into a weaker metal(loid) leaching from ashes. Furthermore, co-combustion with calcium (Ca)-rich lime (waste-based) decreased leaching of all four investigated elements, Cr in particular, below the limit values for waste being accepted at landfills for hazardous waste. Therefore, combustion enabled possibility of safe and long-term deposit of As-bearing ashes. At the same time, less As would be circulating in society. For the future work, studies that could broaden the spectrum of contaminants targeted by Fe-coated peat would be beneficial. At the same time it is important not only to find alternative utilisation methods for Fe-coated peat, but also investigate other management options for the spent adsorbents.
|
|
| 3. |
- Kasiuliene, Alfreda, et al.
(författare)
-
Treatment of metal (loid) contaminated solutions using iron-peat as sorbent : is landfilling a suitable management option for the spent sorbent?
- 2019
-
Ingår i: Environmental Science and Pollution Research. - : Springer. - 0944-1344 .- 1614-7499. ; 26:21, s. 21425-21436
-
Tidskriftsartikel (refereegranskat)abstract
- This study firstly aimed to investigate the potential of simultaneous metal (loid) removal from metal (oid) solution through adsorption on iron-peat, where the sorbent was made from peat and Fe by-products. Up-flow columns filled with the prepared sorbent were used to treat water contaminated with As, Cu, Cr, and Zn. Peat effectively adsorbed Cr, Cu, and Zn, whereas approximately 50% of inlet As was detected in the eluent. Iron-sand was effective only for adsorbing As, but Cr, Cu, and Zn were poorly adsorbed. Only iron-peat showed the simultaneous removal of all tested metal (loid)s. Metal (loid) leaching from the spent sorbent at reducing conditions as means to assess the behaviour of the spent sorbent if landfilled was also evaluated. For this purpose, a standardised batch leaching test and leaching experiment at reducing conditions were conducted using the spent sorbent. It was found that oxidising conditions, which prevailed during the standardised batch leaching test, could have led to an underestimation of redox-sensitive As leaching. Substantially higher amounts of As were leached out from the spent sorbents at reducing atmosphere compared with oxidising one. Furthermore, reducing environment caused As(V) to be reduced into the more-toxic As (III).
|
|
| 4. |
- Kumpiene, Jurate, et al.
(författare)
-
Phosphorus and cadmium availability in soil fertilized with biosolids and ashes
- 2016
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 151, s. 124-132
-
Tidskriftsartikel (refereegranskat)abstract
- The recycling of hygienized municipal sewage sludge (biosolids) to soil as the source of phosphorus (P) is generally encouraged. The use of biosolids, however, has some concerns, such as the presence of elevated concentrations of potentially toxic trace elements, and the possible presence of pathogens, hormones and antibiotics. Organic substances are destroyed during combustion whereas trace elements could partly be separated from P in different ash fractions. Biomass combustion waste (ash) can instead be considered as an alternative P source. This study evaluates and compares the impact of biosolids and their combustion residues (ashes), when used as fertilizers, on P and Cd solubility in soil, plant growth and plant uptake of these elements. Biosolids were also amended with K and Ca to improve the composition and properties of P in ashes, and incinerated at either 800 °C or 950 °C. Combustion of biosolids improved the Cd/P ratio in ashes by 2–5 times, compared with the initial biosolids. The low Cd content in ashes (4–9 mg Cd (kg P)−1) makes this material a particularly attractive alternative to mineral fertilizers. Significantly higher pore water P (as well as total N) was measured in soils containing biosolids, but plants produced a higher biomass in soil fertilized with ashes. The K and Ca amendments prior to biosolids combustion generally decreased the total Cd in ash, but had little effect on P and Cd uptake and biomass growth. Similarly, the combustion temperature had negligible effect on these factors as well.
|
|
| 5. |
- Tiberg, Charlotta, et al.
(författare)
-
Immobilization of Cu and As in two contaminated soils with zero-valent iron - Long-term performance and mechanisms
- 2016
-
Ingår i: Applied Geochemistry. - : Elsevier. - 0883-2927 .- 1872-9134. ; 67, s. 144-152
-
Tidskriftsartikel (refereegranskat)abstract
- Immobilization of trace elements in contaminated soils by zero-valent iron (ZVI) is a promising remediation method, but questions about its long-term performance remain unanswered. To quantify immobilization and predict possible contaminant remobilization on long timescales detailed knowledge about immobilization mechanisms is needed. This study aimed at assessing the long-term effect of ZVI amendments on dissolved copper and arsenic in contaminated soils, at exploring the immobilization mechanism(s), and at setting up a geochemical model able to estimate dissolved copper and arsenic under different scenarios. Samples from untreated and ZVI-treated plots in two field experiments where ZVI had been added 6 and 15 years ago were investigated by a combination of batch experiments, geochemical modeling and extended X-ray absorption fine structure (EXAFS) spectroscopy. Dissolved copper and arsenic concentrations were described by a multisurface geochemical model with surface complexation reactions, verified by EXAFS. The ZVI remained "reactive" after 6-15 years, i. e. the dissolved concentrations of copper and arsenic were lower in the ZVI-treated than in the untreated soils. There was a shift in copper speciation from organic matter complexes in the untreated soil to surface complexes with iron (hydr)oxides in the ZVI-treated soil. The pH value was important for copper immobilization and ZVI did not have a stabilizing effect if pH was lower than about 6. Immobilization of arsenic was slightly pH-dependent and sensitive to the competition with phosphate. If phosphate was ignored in the modeling, the dissolution of arsenate was greatly underestimated. (C) 2016 Elsevier Ltd. All rights reserved.
|
|
| 6. |
- Amofah, Lea Rastas, et al.
(författare)
-
The influence of temperature, pH/molarity and extractant on the removal of arsenic, chromium and zinc from contaminated soil
- 2011
-
Ingår i: Journal of Soils and Sediments. - : Springer Science and Business Media LLC. - 1439-0108 .- 1614-7480. ; 11:8, s. 1334-1344
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Normal soil washing leave high residual pollutant content in soil. The remediation could be improved by targeting the extraction to coarser fractions. Further, a low/high extraction pH and higher temperature enhance the pollutant removal, but these measures are costly. In this study, the utility of NaOH, oxalate-citrate (OC) and dithionite-citrate-oxalate (DCO) solutions for extracting of arsenic, chromium and zinc from contaminated soil were assessed and compared. In addition the effects of NaOH concentration and temperature on NaOH extractions, and those of temperature and pH on OC and DCO extractions, were evaluated. Materials and methods: A two-level, full-factorial design with a centre point was implemented. Two factors, concentration and temperature,were evaluated in NaOH extractions, and pH and temperature for OC and DCO solutions. In all cases, the extraction temperature was 20°C, 30°C and 40°C. The studied NaOH concentrations were 0.05, 0.075 and 0.1 M. The pH in OC solutions was 3, 5 and 7, and in DCO solutions, 4.7, 6.3 and 6.7. Water-washed and medium coarse soil fraction of arsenic, chromium and zinc contaminated soil was agitated for 15 min with the extraction solution. Results and discussion: In NaOH extractions, the temperature and (less strongly) NaOH concentration significantly affected As and Cr mobilisation, but only the latter affected Zn mobilisation. Both pH and temperature significantly (and similarly) influenced As and Cr mobilisation in OC extractions, while only the pH influenced Zn mobilisation. In contrast, the extraction temperature (but not pH) influenced As, Cr and Zn mobilisation in DCO extractions. Conclusions: For all extractants, mobilisation was most efficient at elevated temperature (40°C). None of the extractants reduced the soil's As content to below the Swedish EPA's guideline value. Use of DCO is not recommended because dithionite has a short lifetime and residual arsenic contents in DCO-extracted soil are relatively high. Instead, sequential extraction with NaOH followed by OC solutions (affording significant reductions in As, Cr and Zn levels in the soil with short extraction times) at 40°C is recommended.
|
|
| 7. |
- Antelo, Juan, et al.
(författare)
-
Stability of naturally occurring AMD–schwertmannite in the presence of arsenic and reducing agents
- 2021
-
Ingår i: Journal of Geochemical Exploration. - : Elsevier. - 0375-6742 .- 1879-1689. ; 220
-
Tidskriftsartikel (refereegranskat)abstract
- Secondary iron oxides formed in acid mine drainage, such as schwertmannite, are scavengers for metal(loid)s in mining environments. Increasing the understanding of the geochemical transformations of these minerals, as well as knowing how metal(loid)s affect these transformations, is crucial to ultimately predict the fate of these trace elements in acidic mine drainage and to minimize the potential environmental risk. In this study, transformation experiments have been conducted with a schwertmannite-rich sediment collected from a mining area and with synthesized schwertmannite as a reference material. The transformation of schwertmannite into goethite was studied as a function of the presence of arsenic, pH value, and redox conditions. Arsenic delayed the mineral transformation from pseudo-stable amorphous phases to more stable crystalline forms, especially at higher arsenic loadings and more acidic pH. Experiments in the presence of Fe(II) and ascorbic acid have proven that both components promote the mineral transformation or reductive dissolution of schwertmannite under anoxic conditions. The presence of arsenic reduced the catalytic effect of Fe(II), stabilizing the schwertmannite particles. On the other hand, arsenic had no effect on the reductive dissolution at these conditions when ascorbic acid was used as a reducing agent. © 2020 Elsevier B.V.
|
|
| 8. |
|
|
| 9. |
- Bert, Valérie, et al.
(författare)
-
How to manage plant biomass originated from phytotechnologies? : Gathering perceptions from end-users
- 2017
-
Ingår i: International journal of phytoremediation. - : Taylor & Francis. - 1522-6514 .- 1549-7879. ; 19:10, s. 947-954
-
Tidskriftsartikel (refereegranskat)abstract
- A questionnaire survey was carried out in 4 European countries to gather end-user's perceptions of using plants from phytotechnologies in combustion and anaerobic digestion (AD). 9 actors of the wood energy sector from France, Germany and Sweden, and 11 AD platform operators from France, Germany and Austria were interviewed. Questions related to installation, input materials, performed analyses, phytostabilization and phytoextraction. Although the majority of respondents did not know phytotechnologies, results suggested that plant biomass from phytomanaged areas could be used in AD and combustion, under certain conditions. As a potential advantage, these plants would not compete with plants grown on agricultural lands, contaminated lands being not suitable for agriculture production. Main limitations would be related to additional controls in process' inputs and end-products and installations that might generate additional costs. In most cases, price of phytotechnologies biomass was mentioned as a driver to potentially use plants from metal-contaminated soils. Plants used in phytostabilisation or phytoexclusion were thought to be less risky and, consequently, benefited from a better theoretical acceptance than those issued from phytoextraction. Results were discussed according to national regulations. One issue related to the regulatory gap concerning the status of the plant biomass produced on contaminated land.
|
|
| 10. |
- Bhattacharya, Prosun, 1962-, et al.
(författare)
-
Editors’ foreword
- 2016
-
Ingår i: Arsenic Research and Global Sustainability. - London : CRC Press. - 9781315629438 ; , s. xlv-xlvi, s. xlvii-xlviii
-
Konferensbidrag (refereegranskat)
|
|
