| 1. |
- Haraldsson, Joakim, 1990-, et al.
(författare)
-
Impact analysis of energy efficiency measures in the electrolysis process in primary aluminium production
- 2019
-
Ingår i: WEENTECH Proceedings in Energy. ; , s. 177-184
-
Konferensbidrag (refereegranskat)abstract
- The Paris Agreement includes the goals of ‘holding the increase in the global average temperature to well below 2°C above pre-industrial levels’ and ‘making finance flows consistent with a pathway towards low greenhouse gas emissions’. Industrial energy efficiency will play an important role in meeting those goals as well as becoming a competitive advantage due to reduced costs for companies. The aluminium industry is energy intensive and uses fossil fuels both for energy purposes and as reaction material. Additionally, the aluminium industry uses significant amounts of electricity. The electrolysis process in the primary production of aluminium is the most energy- and carbon-intensive process within the aluminium industry. The aim of this paper is to study the effects on primary energy use, greenhouse gas emissions and costs when three energy efficiency measures are implemented in the electrolysis process. The effects on the primary energy use, greenhouse gas emissions and costs are calculated by multiplying the savings in final energy use by a primary energy factor, emissions factor and price of electricity, respectively. The results showed significant savings in primary energy demand, greenhouse gas emissions and cost from the implementation of the three measures. These results only indicate the size of the potential savings and a site-specific investigation needs to be conducted for each plant. This paper is a part of a research project conducted in close cooperation with the Swedish aluminium industry.
|
|
| 2. |
- Lozano, Francisco J., et al.
(författare)
-
New perspectives for green and sustainable chemistry and engineering : approaches from sustainable resource and energy use, management, and transformation
- 2018
-
Ingår i: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 172, s. 227-232
-
Tidskriftsartikel (refereegranskat)abstract
- The special volume on green and sustainable chemistry and engineering has fourteen papers that were considered relevant to the present day issues and discussion, such as adequate use of raw materials and efficient energy, besides considering renewable sources for materials and energy; and changing economical canons towards circular economy. Businesses, governments and Society are facing a number of challenges to tread the sustainability path and provide wellbeing for future generations. This special volume relevance provides discussions and contributions to foster that desirable future. Chemicals are ubiquitous in everyday activities. Their widespread presence provides benefits to societies’ wellbeing, but can have some deleterious effects. To counteract such effect, green engineering and sustainable assessment in industrial processes have been gathering momentum in the last thirty years. Green chemistry, green engineering, eco-efficiency, and sustainability are becoming a necessity for assessing and managing products and processes in the chemical industry. This special volume presents fourteen articles related to sustainable resource and energy use (five articles), circular economy (one article), cleaner production and sustainable process assessment (five article), and innovation in chemical products (three articles). Green and sustainable chemistry, as well as sustainable chemical engineering and renewable energy sources are required to foster and consolidate a transition towards more sustainable societies. This special volume present current trends in chemistry and chemical engineering, such as sustainable resource and energy use, circular economy, cleaner production and sustainable process assessment, and innovation in chemical products. This special volume provides insights in this direction and complementing other efforts towards such transition.
|
|
| 3. |
- Paramonova, Svetlana, 1986-
(författare)
-
Re-viewing industrial energy-efficiency improvement using a widened system boundary
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Improved energy efficiency in industry is important for reaching the targets within the EU strategy for increased sustainability. However, energy efficiency is not always prioritised within companies, and the improvement potential remains large. This paradox called an energyefficiency gap is explained by energy-efficiency barriers. The low interest in energy efficiency is also explained by the fact that it is not within companies’ core competences and not perceived as strategic. The public policies aiming at closing the gap have thus far been concentrated on the faster diffusion of energy-efficient technologies. This is not sufficient, and the gap can be extended by including energy management practices. To bridge the extended gap, there is a need to introduce an extended system perspective. The aim of this thesis is to investigate the industrial energy-efficiency potential and possibilities for reaching this potential using an extended system boundary.In this thesis, the extended gap was quantified by means of classification of the energy data covering the most electricity-intensive Swedish industrial companies. The results show that technology-related measures represent 61% of energy savings, whereas management-related measures account for 38%. Energy efficiency due to management-related measures can be improved with lower costs. The energy-efficiency potentials for different levels of industrial motor systems were quantified, showing that the highest potential is found in the measures that include personal involvement and the optimisation of routines. This proves that the general approaches based on technological diffusion seem to not be sufficient to solve the energy paradox.The evaluation of the Swedish energy audit programme for small and medium-sized enterprises (SMEs) proved that there is a lack of energy-related knowledge among SMEs. The implementation rate of measures proposed in the audits is only 54%, while there is also a need to reach the SMEs not covered by the programme. The international study of energy-efficiency potentials did not indicate energy management to be considered by SMEs at all.To bridge the extended gap, the external experts’ knowledge on how to work with energy efficiency has to stay within companies. For this, there is a need for methods based on longterm orientation as well as a systematic view of complicated processes. The methods should be universal and applied in a particular context. An example of such a method for large industries is presented in this thesis, whereas applying it to SMEs is problematic due to limited resources. Participating in networks for energy efficiency can be a way to initiate energy-efficiency work within SMEs on a continuous basis. Moreover, this thesis shows that there is a need for the development of a common taxonomy for energy data as well as the development of a central portal where energy data can be reported and stored. This would simplify the monitoring of energy end-use, the control of measures implementation and the comparison between processes, companies and sectors.
|
|
| 4. |
- Wasserbaur, Raphael, 1989-, et al.
(författare)
-
What if everyone becomes a sharer? A quantification of the environmental impact of access-based consumption for household laundry activities
- 2020
-
Ingår i: Resources, Conservation and Recycling. - : Elsevier BV. - 0921-3449 .- 1879-0658. ; 158
-
Tidskriftsartikel (refereegranskat)abstract
- In order to meet the EU's climate and resource efficiency targets, changes in our daily-life behaviours, as well as business models, are urgently necessary. More insights are needed to make real changes based on research with a systems perspective. We developed a system dynamics model to analyse the environmental benefits of a transition from ownership-based to access-based household laundry activities. The model considers demographic, technological and behavioural aspects and thereby assesses the environmental impact of laundry activities. The model is applied to the Swedish as well as the European context and allows cross-country comparisons. The results indicate a significant potential of the sharing economy. The higher utilisation of shared machines and extended lifespans of the machines can cut greenhouse gas emissions by a third and lower raw material usage overall and lower primary raw material in production due to higher recycling rates. The carbon intensity of the energy mix is a crucial factor for the environmental consequences that arise through changes in energy usage due to sharing economy practices. This case study shows the value of adopting policies that could promote sharing and extended life spans.
|
|
| 5. |
- Feiz, Roozbeh, 1975-, et al.
(författare)
-
Biogas Potential for Improved Sustainability in Guangzhou, China : A Study Focusing on Food Waste on Xiaoguwei Island
- 2019
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 11:6
-
Tidskriftsartikel (refereegranskat)abstract
- As a result of rapid development in China and the growth of megacities, large amounts of organic wastes are generated within relatively small areas. Part of these wastes can be used to produce biogas, not only to reduce waste-related problems, but also to provide renewable energy, recycle nutrients, and lower greenhouse gases and air polluting emissions. This article is focused on the conditions for biogas solutions in Guangzhou. It is based on a transdisciplinary project that integrates several approaches, for example, literature studies and lab analysis of food waste to estimate the food waste potential, interviews to learn about the socio-technical context and conditions, and life-cycle assessment to investigate the performance of different waste management scenarios involving biogas production. Xiaoguwei Island, with a population of about 250,000 people, was chosen as the area of study. The results show that there are significant food waste potentials on the island, and that all studied scenarios could contribute to a net reduction of greenhouse gas emissions. Several socio-technical barriers were identified, but it is expected that the forthcoming regulatory changes help to overcome some of them.
|
|
| 6. |
- Boks, Casper, et al.
(författare)
-
Nordic Post-Graduate Sustainable Design and Engineering Research from a Supervisor Perspective
- 2008
-
Ingår i: NordDesign 2008. - Tallin, Estonia. ; , s. 171-180
-
Konferensbidrag (refereegranskat)abstract
- The multi- and interdisciplinary field of sustainable product innovation is rapidly expanding as an arena for scientific research. Universities in Nordic countries can be considered as an exponent of this type of research, with active research groups in, among others, Göteborg, Helsinki, Lund, Lyngby, Linköping and Trondheim. In the context of a Nordforsk funded project, seven second generation PhD supervisors from these universities, who have been active in this field for many years, discuss funding, publication, research traditions, education and supervision practices related to PhD research in this field. A number of recommendations to improve current practices are made, including the mapping currently existing differences in different academic institutions, studying the cross-over learning effects between academica and non-academic partners, and the development of ‘quality indicators’ of research in the SPI domain.
|
|
| 7. |
- Boons, Frank, et al.
(författare)
-
Comparing industrial symbiosis in Europe : towards a conceptual framework and research methodology
- 2015
-
Ingår i: International perspectives on industrial ecology. - Cheltenham : Edward Elgar Publishing. - 9781781003565 - 9781781003572 ; , s. 69-88
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Industrial symbiosis (IS) continues to raise the interest of researchers and practitioners alike. Individual and haphazard attempts to increase linkages among co-located firms have been complemented by concerted efforts to stimulate the development of industrial regions with intensified resource exchanges that reduce environmental impact. Additionally, there are examples of both spontaneous and facilitated linkages between two or more firms involving flows of materials/energy waste. A striking feature of IS activities is that they are found across diverse social contexts and vary considerably in form (Lombardi et al., 2012); there are substantial differences in the ways in which IS manifests itself. Equally diverse are the activities of policy makers to stimulate such linkages. Such diversity can already be found within Europe, as became apparent in a first meeting among some of the present authors in 2009 (Isenmann and Chernykh, 2009). Researchers present there decided to create a network of European researchers on IS, with the explicit aim to develop a comparative analysis. We can thus provide insight to the relationship between the style of IS and its context and thereby the potential for policy makers in different contexts to learn from each other. Policy learning can be a tempting route to IS, but is fraught with difficulties if the influence of context is not appreciated (e.g., Wang et al., Chapter 6, this volume).
|
|
| 8. |
- Höjer, Mattias, 1966-, et al.
(författare)
-
Scenarios in selected tools for environmental systems analysis
- 2008
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 16:18, s. 1958-1970
-
Tidskriftsartikel (refereegranskat)abstract
- A number of different tools for analysing environmental impacts of different systems have been developed. These include procedural tools such as strategic environmental assessment (SEA) and environmental management systems (EMS) as well as analytical ones such as life cycle assessment (LCA), life cycle costing (LCC), cost-benefit analysis (CBA) and the system of economic and environmental accounts (SEEA) including input-output analysis (IOA). Descriptions or scenarios of the future are typically relevant elements in these tools, since they are often used to describe impacts in the future. For futures studies a number of different approaches and techniques have been developed. In an earlier paper we have presented a typology of different types of scenarios that respond to different types of questions. These include predictive scenarios, explorative scenarios and normative scenarios. The aim of this paper is to explore connections between selected tools for environmental systems analysis and different scenario types. Although there is a clear need for futures studies in several tools for environmental systems analysis, it is interesting to note that the literature on methodologies for and case studies of combinations of futures studies and environmental systems analysis tools is rather limited. This suggests that there is a need for further research in this area including both methodoloy and practical case studies.
|
|
| 9. |
- Kimita, Koji, et al.
(författare)
-
Failure analysis method for enhancing circularity through systems perspective
- 2021
-
Ingår i: Journal of Industrial Ecology. - : Wiley. - 1530-9290 .- 1088-1980. ; 25:3, s. 544-562
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, a circular economy has attracted global attention as an approach for addressing material security and resource-efficiency issues. As our societies shift toward a circular economy, manufacturers need to not only produce environmentally conscious products but to also realize reliable systems that will ensure the closure of the loops of the products, components, and materials. To do so, early-stage design is crucial to effectively and efficiently detect possible failures and then take adequate countermeasures against them. Although a few methods of failure analysis have been proposed to address environmental issues, these methods have failed to consider the cause–effect relationships among failures. This will hinder manufacturers from identifying core problems that should be addressed in a given system. Therefore, this study extends failure mode and effect analysis, which is an engineering technique used to address potential failures, by addressing the entire system reliability in relation to circularity. As a result of a case study of a manufacturer aiming to increase circularity with their products on the market, we revealed that the proposed method is useful in the early stage of design to (a) identify failure modes where effects are largely given to or received from other failures, (b) develop countermeasures effectively by addressing root causes of failures, and (c) find an opportunity to collaborate with external actors.
|
|
| 10. |
- Metson, Genevieve, 1988-, et al.
(författare)
-
Efficiency Through Proximity : Changes in Phosphorus Cycling at the Urban–Agricultural Interface of a Rapidly Urbanizing Desert Region
- 2012
-
Ingår i: Journal of Industrial Ecology. - : John Wiley & Sons. - 1088-1980 .- 1530-9290. ; 16:6, s. 914-927
-
Tidskriftsartikel (refereegranskat)abstract
- In tightly coupled socioecological systems, such as cities, the interactions between socio-economic and biophysical characteristics of an area strongly influence ecosystem function. Very often the effects of socioeconomic activities on ecosystem function are unintended, but can impact the sustainability of a city and can have irreversible effects. The food system in its entirety, from production to treatment of human waste, is one of the most important contributors to the way phosphorus (P) cycles through cities. In this article we examined the changes in P dynamics at the urbanï¿œagricultural interface of the Phoenix, Arizona, USA, metropolitan area between 1978 and 2008. We found that the contribution of cotton to harvested P decreased while the contribution of alfalfa, which is used as feed for local dairy cows, increased over the study period. This change in cropping pattern was accompanied by growth in the dairy industry and increased internal recycling of P due to dairy cow manure application to alfalfa fields and the local recycling of biosolids and treated wastewater. The proximity of urban populations with dairies and feed production and low runoff in this arid climate have facilitated this serendipitous recycling. Currently P is not strongly regulated or intentionally managed in this system, but farmers’ behaviors, shaped largely by market forces and policies related to water recycling, unintentionally affect P cycling. This underscores the need to move from unintentional to deliberate and holistic management of P dynamics through collaborations between practitioners and researchers in order to enhance urban sustainability.
|
|
