| 1. |
- Feiz, Roozbeh, 1975-, et al.
(author)
-
Biogas Potential for Improved Sustainability in Guangzhou, China : A Study Focusing on Food Waste on Xiaoguwei Island
- 2019
-
In: Sustainability. - : MDPI. - 2071-1050. ; 11:6
-
Journal article (peer-reviewed)abstract
- As a result of rapid development in China and the growth of megacities, large amounts of organic wastes are generated within relatively small areas. Part of these wastes can be used to produce biogas, not only to reduce waste-related problems, but also to provide renewable energy, recycle nutrients, and lower greenhouse gases and air polluting emissions. This article is focused on the conditions for biogas solutions in Guangzhou. It is based on a transdisciplinary project that integrates several approaches, for example, literature studies and lab analysis of food waste to estimate the food waste potential, interviews to learn about the socio-technical context and conditions, and life-cycle assessment to investigate the performance of different waste management scenarios involving biogas production. Xiaoguwei Island, with a population of about 250,000 people, was chosen as the area of study. The results show that there are significant food waste potentials on the island, and that all studied scenarios could contribute to a net reduction of greenhouse gas emissions. Several socio-technical barriers were identified, but it is expected that the forthcoming regulatory changes help to overcome some of them.
|
|
| 2. |
- Feiz, Roozbeh, 1975-
(author)
-
Industrial Ecology and Development of Production Systems : Analysis of the CO2 Footprint of Cement
- 2014
-
Licentiate thesis (other academic/artistic)abstract
- This research is an attempt to create a comprehensive assessment framework for identifying and assessing potential improvement options of cement production systems.From an environmental systems analysis perspective, this study provides both an empirical account and a methodological approach for quantifying the CO2 footprint of a cement production system. An attributional Life Cycle Assessment (LCA) is performed to analyze the CO2 footprint of several products of a cement production system in Germany which consists of three dierent plants. Based on the results of the LCA study, six key performance indicators are dened as the basis for a simplied LCA model. This model is used to quantify the CO2 footprint of dierent versions of the cement production system.In order to identify potential improvement options, a framework for Multi-Criteria Assessment (MCA) is developed. The search and classication guideline of this framework is based on the concepts of Cleaner Production, Industrial Ecology, and Industrial Symbiosis. It allows systematic identication and classication of potential improvement options. In addition, it can be used for feasibility and applicability evaluation of dierent options. This MCA is applied both on a generic level, reecting the future landscape of the industry, and on a production organization level re ecting the most applicable possibilities for change. Based on this assessment a few appropriate futureoriented scenarios for the studied cement production system are constructed. The simplied LCA model is used to quantify the CO2 footprint of the production system for each scenario.By integrating Life Cycle Assessment and Multi-Criteria Assessment approaches, this study provides a comprehensive assessment method for identifying suitable industrial developments and quantifying the CO2 footprint improvements that might be achieved by their implementation.The results of this study emphasis, although by utilizing alternative fuels and more ecient production facility, it is possible to improve the CO2 footprint of clinker, radical improvements can be achieved on the portfolio level. Compared to Portland cement, very high reduction of CO2 footprint can be achieved if clinker is replaced with low carbon alternatives, such as Granulated Blast Furnace Slag (GBFS) which are the by-products of other industrial production. Benchmarking a cement production system by its portfolio product is therefore a more reasonable approach, compared to focusing on the performance of its clinker production.This study showed that Industrial Symbiosis, that is, over the fence initiatives for material and energy exchanges and collaboration with nontraditional partners, are relevant to cement industry. However, the contingent nature of these strategies should always be noted, because the mere exercise of such activities may not lead to a more resource ecient production system. Therefore, in search for potential improvements, it is important to keep the search horizon as wide as possible, however, assess the potential improvements in each particular case. The comprehensive framework developed and applied in this research is an attempt in this direction.
|
|
| 3. |
- Ammenberg, Jonas, et al.
(author)
-
Assessment of Feedstocks for Biogas Production, Part II : Results for Strategic Decision Making
- 2017
-
In: Resources, Conservation and Recycling. - : Elsevier. - 0921-3449 .- 1879-0658. ; 122, s. 388-404
-
Journal article (peer-reviewed)abstract
- Biogas production is essentially based on organic materials and biological processes; hence it can contribute to the transition toward a biobased economy. Biogas is a biofuel that can contribute to a more renewable and local energy system. In comparison with other biofuels, biogas is more flexible and can be produced from many different types of feedstock, including biomass containing various shares of carbohydrates, lipids and, both from primary and secondary raw materials. However, a significantly expanded biogas production is dependent on good business conditions, in turn related to societal acceptance and support. There are many factors that can make a biogas solution more or less suitable for both producers and the broader society. Among the many influencing factors, the choice of feedstocks (biomass) for producing biogas and biofertilizer is of strategic importance. But, to assess the suitability is complicated, because it is linked to many different challenges such as cost, energy balance, environmental impacts, institutional conditions, available technologies, geographical conditions, alternative and competing interest, and so on. Suitability includes aspects related to feasibility for implementation, potential for renewable energy and nutrient recycling, and resource efficiency. In this article, a multi-criteria framework, which is proposed in a companion article (Part II), is used to assess the suitability of four types of feedstocks for producing biogas (considering Swedish conditions). The assessed feedstocks are ley crops, straw, farmed blue mussels, and source-sorted food waste. The results have synthesized and structured a lot of information, which facilitates considerably for those that want an overview and to be able to review several different areas simultaneously. Among the assessed feedstocks, biogas production from household food waste and ley is the most straightforward. For straw and farmed blue mussels, there are more obstacles to overcome including some significant barriers. For all feedstock there are challenges related to the institutional conditions. The assessment contributes to the knowledge about sustainable use of these feedstocks, and the limitations and opportunities for biogas development. It supports more informed decision making, both in industry and policy. Existing, or forthcoming, biogas and biofertilizer producers who are considering altering or expanding their production systems can benefit from a better understanding of different choices of feedstock that are or can be (potentially) at their disposal; thus, identify hotspots, weak points, and possible candidates for implementation in future. This research is performed within the Biogas Research Center (BRC), which is a transdisciplinary center of excellence with the overall goal of promoting resource-efficient biogas solutions in Sweden. The BRC is funded by the Energy Agency of Sweden, Linköping University, and more than 20 partners from academia, industry, municipalities and other several public and private organizations.
|
|
| 4. |
- Ammenberg, Jonas, et al.
(author)
-
Improving the CO2 performance of cement, part III : The relevance of industrial symbiosis and how to measure its impact
- 2015
-
In: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 98, s. 145-155
-
Journal article (peer-reviewed)abstract
- Cement production contributes to extensive CO2 emissions. However, the climate impact can vary significantly between different production systems and different types of cement products. The market is dominated by ordinary Portland cement, which is based on primary raw materials and commonly associated with combustion of vast amounts of fossil fuels. Therefore, the production of Portland cement can be described as a rather linear process. But there are alternative options, for example, involving large amounts of industrial byproducts and renewable energy which are more cyclic and thus can be characterized as relatively “synergistic”.The main purpose of this article is to study how relevant the leading ideas of industrial symbiosis are for the cement industry based on a quantitative comparison of the CO2 emissions from different cement production systems and products, both existing and hypothetical. This has been done by studying a group of three cement plants in Germany, denoted as ClusterWest, and the production of cement clinker and three selected cement products. Based on this analysis and literature, it is discussed to what extent industrial symbiosis options can lead to reduced CO2 emissions, for Cluster West and the cement industry in general.Utilizing a simplified LCA model (“cradle to gate”), it was shown that the CO2 emissions from Cluster West declined by 45% over the period 1997e2009, per tonne of average cement. This was mainly due to a large share of blended cement, i.e., incorporation of byproducts from local industries as supplementary cementitious materials. For producers of Portland cement to radically reduce the climate impact it is necessary to engage with new actors and find fruitful cooperation regarding byproducts, renewable energy and waste heat. Such a development is very much in line with the key ideas of industrial ecology and industrial symbiosis, meaning that it appears highly relevant for the cement industry to move further in this direction. From a climate perspective, it is essential that actors influencing the cement market acknowledge the big difference between different types of cement, where an enlarged share of blended cement products (substituting clinker with byproducts such as slag and fly ash) offers a great scope for future reduction of CO2 emissions.
|
|
| 5. |
- Ammenberg, Jonas, 1973-, et al.
(author)
-
Industrial symbiosis for improving the CO2-performance of cement
- 2012
-
Conference paper (peer-reviewed)abstract
- Justification of the paper Cement production is one of the largest contributors to global CO2-emissions. However, the context and characteristics of the production and the cement products vary a lot. A significant part of the production must be characterized as rather linear, for example, to a large extent based on fossil fuels and involving material flows that are not closed. But there are also much more synergistic examples, involving industrial by-products, renewable energy, etc. Clearly, there are opportunities for improvement within the cement industry and it is interesting to analyze to what extent increased industrial symbiosis can lead to improved climate performance. This has been done by studying the production of cement clinker and three selected cement products produced within the Cluster West in Germany, consisting of three cement plants that are owned by the multinational company CEMEX. The methodology is mostly based on Life Cycle Assessment (LCA), from cradle-to-gate.PurposeThe overall purpose is to contribute to a better understanding of the climate performance of different ways of producing cement, and different cement products. The climate impact is assessed for “traditional”, rather linear, ways of making cement, but also two more synergistic alternatives, where the by-product granulated blast furnace slag (GBFS) is utilized to a large extent, substituting cement clinker. It is also shown how the climate performance of the West Cluster has changed from 1997 until 2009 (the main year of study), and investigated how further industrial symbiosis measures could improve the performance.Theoretical frameworkTo a large extent this project has been based on mapping and analysis of relevant flows of material and energy, where LCA methodology has played an important part. Theoretical and methodological aspects related to the fields of Industrial Ecology and Industrial Symbiosis have played an important role. The findings are discussed in relation to some of the key ideas within these fields. The paper generates insight into the methodological challenge of quantifying environmental performance of different production approaches and basically what CO2 improvement potential cement industry has by taking industrial symbiosis measures.ResultsThe results showed that the cement clinker produced at Cluster West is competitive from a climate perspective, causing CO2-eq missions that are a couple of percent lower than the world average. During the twelve year period from 1997 to 2009 these emissions became about 12 percent lower, which was mainly achieved by production efficiency measures but also via changing fuels. However, the most interesting results concern the blended cement products. It was manifested that it is very advantageous from a climate perspective to substitute clinker with granulated blast furnace slag. For example, the CO2-eq emissions were estimated to be 65 percent lower for the best product compared to “ordinary cement”.ConclusionsInformation and measures at the plant level are not sufficient to compare products or to significantly reduce the climate impact related to cement. To achieve important reductions of the emissions, measures and knowledge at a higher industrial symbiosis level are needed.
|
|
| 6. |
- Ammenberg, Jonas, 1973-, et al.
(author)
-
Systematic assessment of feedstock for an expanded biogas production : A multi-criteria approach
- 2017
-
Reports (other academic/artistic)abstract
- Biogas solutions can contribute to more renewable and local energy systems, and also involve other essential aspects such as nutrient recycling. From a theoretical feedstock perspective there is a great biogas potential in Sweden, but the development has been relatively slow as many biogas producers face challenges of different types. Among the many influencing factors, the choice of feedstocks (biomass) is of strategic importance. Within the Biogas Research Center (BRC), hosted by Linköping University in Sweden, a research project focused on feedstock has been ongoing for several years. It has involved researchers, biogas and biofertilizer producers, agricultural organizations and others. The main aim has been to develop a method to assess the suitability of feedstock for biogas and biofertilizer production, and to apply this method on a few selected feedstocks. A multi-criteria method has been developed that covers potential, feasibility and resource efficiency, operationalized via 17 indicators directed towards cost efficiency, technological feasibility, energy and environmental performance, accessibility, competition, policy and other issues. Thus the method it is relatively comprehensive, yet hopefully simple enough to be used by practitioners.The main ambition, applying the method, has been to collect and structure relevant information to facilitate strategic overviews, communication and informed decision making. This is relevant for development within the biogas and biofertilizer industry, for policymakers, to define and prioritize among essential research projects, etc. This report presents some essential parts of this project, focusing on the multi-criteria method and results regarding ley crops, straw, farmed blue mussels and food waste (and stickleback to some extent). It clarifies how the method can be applied and highlights barriers, drivers and opportunities for each feedstock. Comparisons are also made. The results indicate that biogas production from food waste and ley crops is the most straightforward, and for straw and farmed blue mussels there are more obstacles to overcome. For all of them, the dynamic and very uncertain policy landscape is a barrier. In the final chapter, some conclusions about the method and its application are drawn.
|
|
| 7. |
- Feiz, Roozbeh, et al.
(author)
-
A corridor striving for sustainability - Reflecting upon PhD education at a Swedish University
- 2015
-
Conference paper (other academic/artistic)abstract
- In this paper, we present an overview of interdisciplinary research from Ph.D. students working at the Division of Environmental Technology and Management at Linköping University, Sweden. Each of the Ph.D. students addresses the overall challenge of sustainability transitions in their research, although the themes and content of research varies considerably between individuals, encompassing research on actors, networks, products, materials, services and systems from the public and private sector, operating locally, regionally, nationally and internationally. The scientific literature and methods used to frame and conduct studies varies considerably within the group, as does the individual focus on immediate issues of sustainability.
|
|
| 8. |
- Feiz, Roozbeh, 1975-, et al.
(author)
-
Assessment of Feedstocks for Biogas Production, Part I : A Multi-Criteria Approach
- 2017
-
In: Resources, Conservation and Recycling. - : Elsevier. - 0921-3449 .- 1879-0658. ; 122, s. 373-387
-
Journal article (peer-reviewed)abstract
- Biogas production is essentially based on organic materials and biological processes; hence it can contribute to the transition toward a biobased economy. In comparison with other biofuels, biogas is more flexible and can be produced from many different types of feedstock, including biomass containing various shares of carbohydrates, lipids and, both from primary and secondary raw materials. However, a significantly expanded biogas production is dependent on good business conditions, in turn related to societal acceptance and support. There are many factors that can make a biogas solution more or less suitable for both producers and the broader society. Among the many influencing factors, the choice of feedstocks (biomass) for producing biogas and biofertilizer is of strategic importance. But, to assess the suitability is complicated, because it is linked to many different challenges such as cost, energy balance, environmental impacts, institutional conditions, available technologies, geographical conditions, alternative and competing interest, and so on. Suitability includes aspects related to feasibility for implementation, potential for renewable energy and nutrient recycling, and resource efficiency. In this article, a multi-criteria framework is developed for assessing the suitability of producing biogas from different types of biomass (feedstocks). This framework allows learning about the limitations and opportunities for biogas development and more informed decision making, both in industry and policy. Existing, or forthcoming, biogas and biofertilizer producers who are considering altering or expanding their production systems can benefit from a better understanding of different choices of feedstock that are or can be (potentially) at their disposal; thus, identify hotspots, weak points, and possible candidates for implementation in future. The framework is reasonably comprehensive, yet it is simple enough to be used by practitioners. It could help to minimize the risk of sub-optimization or neglecting important risks or opportunities. This article, the first of two associated articles, is focused on the framework itself. The framework is applied to assess the suitability of producing biogas from “stickleback”, which is a non-edible fish in the Baltic Sea region. In the companion article (Part II), four other feedstocks are assessed, namely ley crops, straw, farmed blue mussels, and source-sorted food waste.This research is performed within the Biogas Research Center (BRC), which is a transdisciplinary center of excellence with the overall goal of promoting resource-efficient biogas solutions in Sweden. The BRC is funded by the Energy Agency of Sweden, Linköping University, and more than 20 partners from academia, industry, municipalities and other several public and private organizations.
|
|
| 9. |
- Feiz, Roozbeh, et al.
(author)
-
Improving the CO2 performance of cement, part I : Utilizing life-cycle assessment and key performance indicators to assess development within the cement industry
- 2015
-
In: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 98, s. 272-281
-
Journal article (peer-reviewed)abstract
- Cement is a vital and commonly used construction material that requires large amounts of resources and the manufacture of which causes significant environmental impact. However, there are many different types of cement products, roughly ranging from traditional products with rather linear resource flows to more synergistic alternatives where industrial byproducts are utilized to a large extent. Life Cycle Assessment (LCA) studies indicate the synergistic products are favorable from an environmental perspective.In co-operation with the global cement producing company CEMEX a research project has been carried out to contribute to a better understanding of the CO2 performance of different ways of producing cement, and different cement products. The focus has been on Cluster West, which is a cement production cluster consisting of three plants in Germany.This paper is the first in a series of three, all of which are included in this special issue. It has two main aims. The first is to carry out an attributional LCA and compare three different cement products produced in both linear and synergistic production setups. This has been done for cradle to gate, focusing on CO2-eq emissions for Cluster West. The second aim of this part is to develop and test a simplified LCA model for this production cluster, with the intention to be able to compare different versions of the production system based on the information of a few parameters.The attributional LCA showed that cement products that contain a large proportion of byproducts, in this case, ground granulated blast furnace slag from the iron and steel industry, had the lowest unit emissions of CO2-eq. The difference between the lowest emission product (CEM III/B) and the highest (CEM I) was about 66% per tonne. A simplified LCA model based on six key performance indicators, instead of approximately 50 parameters for the attributional LCA, was established. It showed that Cluster West currently emits about 45% less CO2-eq per tonne of average product compared to 1997. The simplified LCA model can be used effectively to model future changes of both plants and products (which is further discussed in part II and part III).
|
|
| 10. |
- Feiz, Roozbeh, et al.
(author)
-
Improving the CO2 performance of cement, part II : Framework for assessing CO2 improvement measures in cement industry
- 2015
-
In: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 98, s. 282-291
-
Journal article (peer-reviewed)abstract
- Cement production is among the largest anthropogenic sources of carbon dioxide (CO2) and there is considerable pressure on the cement industry to reduce these emissions. In the effort to reduce CO2 emissions, there is a need for methods to systematically identify, classify and assess different improvement measures, to increase the knowledge about different options and prioritize between them. For this purpose a framework for assessment has been developed, inspired by common approaches within the fields of environmental systems analysis and industrial symbiosis. The aim is to apply a broad systems perspective and through the use of multiple criteria related to technologies and organization strategies facilitate informed decision-making regarding different CO2 performance measures in the cement industry.The integrated assessment framework consists of two parts: a generic and a case-specific part. It is applied to a cement production cluster in Germany called Cluster West, consisting of three cement plants owned by CEMEX. The framework can be used in different ways. It can be used as a tool to perform literature reviews and categorize the state-of-the-art knowledge about options to improve the CO2 performance. It can also be used to assess options for the cement industry in general as well as for individual plants.This paper describes the assessment framework, the ideas behind it, its components and the process of carrying out the assessment. The first part provides a structured overview of the options for improvement for the cement industry in general, while the second part is a case-specific application for Cluster West, providing information about the feasibility for different categories of measures that can reduce the CO2 emissions. The overall impression from the project is that the framework was successfully established and, when applied, facilitated strategic discussions and decision-making. Such frameworks can be utilized to systematically assess hundreds of different measures and identify the ones most feasible and applicable for implementation, within the cement industry but also possibly in other sectors. The results demonstrated that even in a relatively synergistic and efficient production system, like Cluster West, there are opportunities for improvement, especially if options beyond “production efficiency” are considered.
|
|
