| 1. |
- Lindahl, Niklas, 1981, et al.
(författare)
-
Early stage techno-economic and environmental analysis of aluminium batteries
- 2023
-
Ingår i: Energy Advances. - : Royal Society of Chemistry (RSC). - 2753-1457. ; 2:3, s. 420-429
-
Tidskriftsartikel (refereegranskat)abstract
- For any proper evaluation of next generation energy storage systems technological, economic, and environmental performance metrics should be considered. Here conceptual cells and systems are designed for different aluminium battery (AlB) concepts, including both active and passive materials. Despite the fact that all AlBs use high-capacity metal anodes and materials with low cost and environmental impact, their energy densities differ vastly and only a few concepts become competitive taking all aspects into account. Notably, AlBs with high-performance inorganic cathodes have the potential to exhibit superior technological and environmental performance, should they be more reversible and energy efficient, while at the system level costs become comparable or slightly higher than for both AlBs with organic cathodes and lithium-ion batteries (LIBs). Overall, with continued development, AlBs should be able to complement LIBs, especially in light of their significantly lower demand for scarce materials. Several aluminium battery concepts are evaluated at material, cell and system levels for technical, economic and environmental performance, which enables them to complement lithium-ion batteries in the future.
|
|
| 2. |
- Mani, Mahesh, et al.
(författare)
-
Simulation and analysis for sustainable product development
- 2013
-
Ingår i: International Journal of Life Cycle Assessment. - : Springer Science and Business Media LLC. - 1614-7502 .- 0948-3349. ; 18:5, s. 1129-1136
-
Tidskriftsartikel (refereegranskat)abstract
- Simulation plays a critical role in the design of products, materials, and manufacturing processes. However, there are gaps in the simulation tools used by industry to provide reliable results from which effective decisions can be made about environmental impacts at different stages of product life cycle. A holistic and systems approach to predicting impacts via sustainable manufacturing planning and simulation (SMPS) is presented in an effort to incorporate sustainability aspects across a product life cycle. Methods Increasingly, simulation is replacing physical tests to ensure product reliability and quality, thereby facilitating steady reductions in design and manufacturing cycles. For SMPS, we propose to extend an earlier framework developed in the Systems Integration for Manufacturing Applications (SIMA) program at the National Institute of Standards and Technology. SMPS framework has four phases, viz. design product, engineer manufacturing, engineer production system, and produce products. Each phase has its inputs, outputs, phase level activities, and sustainability-related data, metrics and tools.Results and discussion An automotive manufacturing scenario that highlights the potential of utilizing SMPS framework to facilitate decision making across different phases of product life cycle is presented. Various research opportunities are discussed for the SMPS framework and corresponding information models. The SMPS framework built on the SIMA model has potential in aiding sustainable product development.
|
|
| 3. |
- Andreasi Bassi, Susanna, et al.
(författare)
-
A life cycle assessment framework for large-scale changes in material circularity
- 2021
-
Ingår i: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 135, s. 360-371
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing material circularity is high on the agenda of the European Union in order to decouple environmental impacts and economic growth. While life cycle assessment (LCA) is useful for quantifying the associated environmental impacts, consistent LCA modeling of the large-scale changes arising from policy targets addressing material circularity (i.e., recycled content and recycling rate) is challenging. In response to this, we propose an assessment framework addressing key steps in LCA, namely, goal definition, functional unit, baseline versus alternative scenario definition, and modeling of system responses. Regulatory and economic aspects (e.g., trends in consumption patterns, market responses, market saturation, and legislative side-policies affecting waste management) are emphasized as critical for the identification of potential system responses and for supporting regulatory interventions required to reach the intended environmental benefits. The framework is recommended for LCA studies focusing on system-wide consequences where allocation between product life cycles is not relevant; however, the framework can be adapted to include allocation. The application of the framework was illustrated by an example of implementing a policy target for 2025 of 70% recycled content in PET trays in EU27+1. It was demonstrated that neglecting large-scale market responses and saturation lead to an overestimation of the environmental benefits from the policy target and that supplementary initiatives are required to achieve the full benefits at system level.
|
|
| 4. |
- Cowie, A. L., et al.
(författare)
-
Applying a science-based systems perspective to dispel misconceptions about climate effects of forest bioenergy
- 2021
-
Ingår i: Global Change Biology Bioenergy. - : John Wiley and Sons Inc. - 1757-1693 .- 1757-1707. ; 13:8, s. 1210-1231
-
Tidskriftsartikel (refereegranskat)abstract
- The scientific literature contains contrasting findings about the climate effects of forest bioenergy, partly due to the wide diversity of bioenergy systems and associated contexts, but also due to differences in assessment methods. The climate effects of bioenergy must be accurately assessed to inform policy-making, but the complexity of bioenergy systems and associated land, industry and energy systems raises challenges for assessment. We examine misconceptions about climate effects of forest bioenergy and discuss important considerations in assessing these effects and devising measures to incentivize sustainable bioenergy as a component of climate policy. The temporal and spatial system boundary and the reference (counterfactual) scenarios are key methodology choices that strongly influence results. Focussing on carbon balances of individual forest stands and comparing emissions at the point of combustion neglect system-level interactions that influence the climate effects of forest bioenergy. We highlight the need for a systems approach, in assessing options and developing policy for forest bioenergy that: (1) considers the whole life cycle of bioenergy systems, including effects of the associated forest management and harvesting on landscape carbon balances; (2) identifies how forest bioenergy can best be deployed to support energy system transformation required to achieve climate goals; and (3) incentivizes those forest bioenergy systems that augment the mitigation value of the forest sector as a whole. Emphasis on short-term emissions reduction targets can lead to decisions that make medium- to long-term climate goals more difficult to achieve. The most important climate change mitigation measure is the transformation of energy, industry and transport systems so that fossil carbon remains underground. Narrow perspectives obscure the significant role that bioenergy can play by displacing fossil fuels now, and supporting energy system transition. Greater transparency and consistency is needed in greenhouse gas reporting and accounting related to bioenergy.
|
|
| 5. |
|
|
| 6. |
- D'Angelo, Sebastiano C., et al.
(författare)
-
Techno-Economic Analysis of a Glycerol Biorefinery
- 2018
-
Ingår i: ACS Sustainable Chemistry & Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 6:12, s. 16563-16572
-
Tidskriftsartikel (refereegranskat)abstract
- Biodiesel is an environmentally friendly alternative to fossil fuels, which is experiencing a steep growth in market size. Because the most common biodiesel production technology is based on the transesterification of triglycerides, a burgeoning amount of glycerol byproduct is obtained. In order to address this economic and ecologic drawback, several chemocatalytic technologies have been developed to exploit this compound to feed the market with added-value products. Lactic acid, acrylic acid, allyl alcohol, propanediols, and glycerol carbonate have emerged as the most relevant candidates for this purpose. In previous studies, an environmental and economic assessment of a glycerol biorefinery built on these valorization pathways has been performed, taking into account only the operating costs in relation to the economic aspects. This study evaluates for the first time the investment required by these glycerol valorization processes, based on the Guthrie, Taylor, and Aspen capital cost estimation methods, and then assesses the potential of a heat-integrated glycerol biorefinery. Glycerol carbonate stands out as the dominant product to maximize the profitability with respect to the glycerol utilized, while 1,2-propanediol and allyl alcohol are determined as target compounds to be included in the glycerol biorefinery product mix if further reductions of the environmental impact are sought after. This early stage techno-economic analysis provides a sounder basis toward the practical realization of an integrated facility sustainably upgrading waste streams from the processing of renewables into commodities, thus promoting the concept of circular economy.
|
|
| 7. |
- de Klijn-Chevalerias, M., et al.
(författare)
-
The Dutch approach for assessing and reducing environmental impacts of building materials
- 2017
-
Ingår i: Building and Environment. - : Elsevier BV. - 0360-1323. ; 111, s. 147-159
-
Tidskriftsartikel (refereegranskat)abstract
- Buildings are one of the largest consumers of energy and materials, and hence they are also one of the largest contributors to negative environmental impacts. Traditionally, energy consumed by buildings during their operation phase was the most significant in their lifecycles and far exceeded the embodied energy. However, in contemporary low-energy buildings, the embodied energy is proportionally higher because of the prevalent use of energy-intensive materials. To determine the embodied energy and environmental impacts of building materials, the Dutch have developed an assessment method, which has also been adapted by BREEAM-NL. This paper offers an overview of the Dutch approach for assessing the environmental impacts of building materials and demonstrates its practical application. The use of the Dutch Assessment Method to identify, and quantify materials-related design improvements has been demonstrated through an exemplifying case study. It has been identified that the environmental impact of a building is largely influenced by the material choices made at the early design stage of the project.
|
|
| 8. |
- Earon, Robert, et al.
(författare)
-
Groundwater Resources Potential in Hard Rock Terrain : A Multivariate Approach
- 2014
-
Ingår i: Ground Water. - : John Wiley & Sons. - 0017-467X .- 1745-6584.
-
Tidskriftsartikel (refereegranskat)abstract
- Groundwater resources are limited and difficult to predict in crystalline bedrock due to heterogeneity and anisotropy in rock fracture systems. Municipal-level governments often lack the resources for traditional hydrogeological tests when planning for sustainable use of water resources. A new methodology for assessing groundwater resources potential (GRP) based on geological and topographical factors using principal component analysis (PCA) and analysis of variance (ANOVA) was developed and tested. ANOVA results demonstrated statistically significant differences in classed variable groups as well as in classed GRP scores with regard to hydrogeological indicators, such as specific capacity (SC) and transmissivity. Results of PCA were used to govern the weight of the variables used in the prediction maps. GRP scores were able to identify 79% of wells in a verification dataset, which had SC values less than the total dataset median. GRP values showed statistically significant correlations using both parametric (using transformed datasets) and non-parametric methods. The method shows promise for municipal or regional level planning in crystalline terrains with high levels of heterogeneity and anisotropy as a hydrogeologically and statistically based tool to assist in assessing groundwater resources. The methodology is executed in a geographic information systems environment, and uses often readily available data, such as geological maps, feature maps and topography, and thus does not require expensive and time-consuming aquifer tests.
|
|
| 9. |
- Ebrahimi, Babak, 1987, et al.
(författare)
-
Regionalized environmental impacts of construction machinery
- 2020
-
Ingår i: International Journal of Life Cycle Assessment. - : Springer Science and Business Media LLC. - 1614-7502 .- 0948-3349. ; 25:8, s. 1472-1485
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: This study aims to establish a regionalized environmental impact assessment of construction machinery equipped with diesel engines certified by the European emission standard Stage V, and operated in cold climatic zones in Europe. Method: The study quantifies potential environmental impacts associated with construction machinery over the entire lifecycle, from extraction of materials to the end-of-life. For the operation phase, a meso-level emission accounting method is applied to quantify tailpipe emissions for certain subcategories of construction machinery. This is achieved by determining the operational efficiency of each machine in terms of effective hours. The quantified emission data are then adjusted based on engine deterioration models to estimate the rate of increase in emissions throughout the lifetime of each machine. Finally, the CML impact assessment method is applied to inventory data to quantify potential environmental impacts. Results: The study shows that tailpipe emissions, which largely depend on an engine’s fuel consumption, had the largest contribution to environmental impacts in most impact categories. At the same time, there was a positive correlation between the operation weight and the impacts of the machinery. Also, machinery with similar operation weight had relatively similar impact patterns due to similar driving factors and dependencies. In addition, network, sensitivity, and uncertainty analyses were performed to quantify the source of impacts and validate the robustness of the study. Results of the sensitivity analysis showed that the responsiveness of the studied systems is very sensitive to changes in the amount of fuel consumption. In addition, the uncertainty results showed that the domain of uncertainty increased as the operation weight subcategory of machinery increased. Conclusion: This study extends previous work on the life cycle assessment (LCA) of construction machinery, and the methodology developed provides a basis for future extension and improvement in this field. The use of effective hours as the unit of operational efficiency helps to resolve uncertainties linked to lifetime and annual operation hours. Also, the obtained results can be of use for decision support and for assessing the impacts of transition from fossil fuels to alternative fuel types.
|
|
| 10. |
- Ekvall, Tomas, 1963, et al.
(författare)
-
Modelling incineration for more accurate comparisons to recycling in PEF and LCA
- 2021
-
Ingår i: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 136, s. 153-161
-
Tidskriftsartikel (refereegranskat)abstract
- When recycling is beneficial for the environment, results from a life cycle assessment (LCA) should give incentives to collection for recycling and also to the use of recycled material in new products. Many approaches for modeling recycling in LCA assign part of the environmental benefits of recycling to the product where the recycled material is used. For example, the Circular Footprint Formula in the framework for Product Environmental Footprints (PEF) assigns less than 45% of the benefits of recycling to a polymer product sent to recycling. Our calculations indicate that this creates an incorrect climate incentive for incineration of renewable LDPE, when the recovered energy substitutes energy sources with 100–300% more climate impact than the Swedish average district heat and electricity. The risk of incorrect incentives can be reduced through allocating part of the net benefits of energy recovery to the life cycle where the energy is used; we propose this part can be 60% for Sweden, but probably less in countries without a district-heating network. Alternatively, the LCA can include the alternative treatment of waste that is displaced at the incinerator by waste from the investigated product. These solutions both make the LCA more balanced and consistent. The allocation factor 0.6 at incineration almost eliminates the risk of incorrect incentives in a PEF of renewable polymers. However, the focus of LCA on one product at a time might still make it insufficient to guide recycling, which requires concerted actions between actors in different life cycles.
|
|
