| 1. |
-
2021 Vehicle Dynamics seminar
- 2021
-
Proceedings (redaktörskap) (övrigt vetenskapligt/konstnärligt)abstract
- The seminar is held annually. The full title of this year's seminar was "2021 Vehicle Dynamics seminar -- for Future Mobility ...and not only Lateral".
|
|
| 2. |
|
|
| 3. |
-
3rd International Conference on Material Engineering and Advanced Manufacturing Technology, 26–28 April 2019, Shanghai, China
- 2020
-
Proceedings (redaktörskap) (refereegranskat)abstract
- We are very pleased to present the proceedings of the 3rd International Conference on Material Engineering and Advanced Manufacturing Technology (MEAMT 2019) that was held successfully under the auspices of IASED in Shanghai, China, April 26-28, 2019.The theme of the conference - Material Engineering and Advanced Manufacturing Technology - is of key importance to the science and technology and a sustainable industrial development. This conference promotes valuable contacts between academia and industry and addresses both basic research and the societal/industrial technological needs within Material Engineering and Advanced Manufacturing Technology.In this era of Industry 4.0, we hope that the conference provided applicable data/information, addressed the issues in the societal/industrial transformation, and facilitated exchange within and between academia and industry.We want to express our gratitude to the program chairs and all members of the advisory, publicity, and technical committees for their valuable time and advices. We are grateful to the world renowned scientists who acted as keynote speakers at the conference.After a rigorous review process, where each paper was reviewed by at least two reviewers, high quality papers were accepted for presentation at this conference. We would like to thank all the reviewers for their time, effort, and for completing their assignments on time albeit tight deadlines.Many thanks to the authors for their valuable contributions and to the attendees for their active participation.Finally, a big thank to the organizers who made this conference to yet another unforgettable experience.Nader AsnafiProfessor of Mechanical Engineering, Örebro University, Sweden Editor of the proceedings of MEAMT 2019 One behalf of the conference committee.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- A. Bateki, Christian, et al.
(författare)
-
Of milk and mobiles: Assessing the potential of cellphone applications to reduce cattle milk yield gaps in Africa using a case study
- 2021
-
Ingår i: Computers and Electronics in Agriculture. - : Elsevier BV. - 0168-1699. ; 191
-
Tidskriftsartikel (refereegranskat)abstract
- There are growing expectations that Information and Communication Technology (ICT) applications could help improve on-farm yields amongst smallholder farmers in developing countries, and consequently, food and nutrition security. However, few studies have quantified the actual contribution of ICT applications on farmers’ yields, and these studies predominantly focused on crop production. We assessed the potential of ICT applications to close milk yield gaps among small- and medium scale dairy cattle farmers in Africa. First, we developed a theoretical framework summarizing biophysical and socio-economic constraints that foster milk yield gaps and discussed which constraints can be addressed using ICT applications. Second, using a case study of a feeding advice application for dairy cattle pre-tested with farmers in rural Kenya, we analyzed how much stand-alone the application could contribute to close dairy cattle milk yield gaps. Our findings suggest that ICT applications could help address some existing biophysical and socio-economic constraints fostering milk yield gaps, including data collection for breeding programs, feeding management advice, and facilitating access to markets and capital. Our stand-alone ICT application closed yield gaps by 2 % to 6 % on representative farms. Several factors may explain the limited actual contribution of selected ICT applications to reduce existing milk yield gaps, including the quality of the input data and models used in ICT applications, and more structural constraints that cannot be addressed by digital tools. Therefore, although ICT applications could help address constraints to achieving higher milk yields on dairy farms, a significant contribution to improve yields may only be achieved when conditions surrounding their use are adequate.
|
|
| 7. |
|
|
| 8. |
- A. Mouris, Boules, et al.
(författare)
-
Multi-tone Signal Optimization for Wireless Power Transfer in the Presence of Wireless Communication Links
- 2020
-
Ingår i: IEEE Transactions on Wireless Communications. - : Institute of Electrical and Electronics Engineers (IEEE). - 1536-1276 .- 1558-2248. ; 19:5, s. 3575-3590
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we study optimization of multi-tone signals for wireless power transfer (WPT) systems. We investigate different non-linear energy harvesting models. Two of them are adopted to optimize the multi-tone signal according to the channel state information available at the transmitter. We show that a second-order polynomial curve-fitting model can be utilized to optimize the multi-tone signal for any RF energy harvester design. We consider both single-antenna and multi-antenna WPT systems. In-band co-existing communication links are also considered in this work by imposing a constraint on the received power at the nearby information receiver to prevent its RF front end from saturation. We emphasize the importance of imposing such constraint by explaining how inter-modulation products, due to saturation, can cause high interference at the information receiver in the case of multi-tone signals. The multi-tone optimization problem is formulated as a non-convex linearly constrained quadratic program. Two globally optimal solution approaches using mixed-integer linear programming and finite branch-and-bound techniques are proposed to solve the problem. The achieved improvement resulting from applying both solution methods to the multi-tone optimization problem is highlighted through simulations and comparisons with other solutions existing in the literature.
|
|
| 9. |
- Aabel, Lise, 1992, et al.
(författare)
-
Distributed Massive MIMO via all-Digital Radio Over Fiber
- 2020
-
Ingår i: Conference Record - Asilomar Conference on Signals, Systems and Computers. - 1058-6393. ; 2020-November, s. 319-323
-
Konferensbidrag (refereegranskat)abstract
- A crucial challenge in the implementation of distributed massive multiple-input multiple-output (MIMO) architectures is to provide phase coherence while, at the same time, limit the complexity of the remote-radio heads (RRHs), which is important for cost-efficient scalability. To address this challenge, we present in this paper a phase-coherent distributed MIMO architecture, based on off-the-shelf, low-cost components. In the proposed architecture, up- and down-conversion are carried out at the central unit (CU). The RRHs are connected to the CU by means of optical fibers carrying oversampled radio-frequency (RF) 1-bit signals. In the downlink, the 1-bit signal is generated via sigma-delta modulation. At the RRH, the RF signal is recovered from the 1-bit signal through a bandpass filter and a power amplifier, and then fed to an antenna. In the uplink, the 1-bit signal is generated by a comparator whose inputs are the low-noise-amplified received RF signal and a suitably designed dither signal. The performance of the proposed architecture is evaluated with satisfactory results both via simulation and measurements from a testbed.
|
|
| 10. |
- Aad, G, et al.
(författare)
-
Performance of the upgraded PreProcessor of the ATLAS Level-1 Calorimeter Trigger
- 2020
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 15:11
-
Tidskriftsartikel (refereegranskat)abstract
- The PreProcessor of the ATLAS Level-1 Calorimeter Trigger prepares the analogue trigger signals sent from the ATLAS calorimeters by digitising, synchronising, and calibrating them to reconstruct transverse energy deposits, which are then used in further processing to identify event features. During the first long shutdown of the LHC from 2013 to 2014, the central components of the PreProcessor, the Multichip Modules, were replaced by upgraded versions that feature modern ADC and FPGA technology to ensure optimal performance in the high pile-up environment of LHC Run 2. This paper describes the features of the new Multichip Modules along with the improvements to the signal processing achieved. c 2020 CERN for the benefit of the ATLAS collaboration. Published by IOP Publishing Ltd on behalf of Sissa Medialab.
|
|
