SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:DiVA.org:hj-8606"
 

Sökning: onr:"swepub:oai:DiVA.org:hj-8606" > On the Microstructu...

On the Microstructure and the Thermal Conductivity in Compacted Graphite Iron

Selin, Martin, 1979- (författare)
Jönköping University,JTH. Forskningsområde Material och tillverkning - gjutning,Chalmers tekniska högskola,Chalmers University of Technology
Svensson, Ingvar L., Professor (preses)
Jönköping University,JTH. Forskningsområde Material och tillverkning - gjutning
Holmgren, Daniel, Ph.D. (preses)
Jönköping University,JTH. Forskningsområde Material och tillverkning - gjutning
visa fler...
Nyborg, Lars, Professor (preses)
Materials and Manufacturing Technology, Chalmers University of Technology
Hamberg, Kenneth, Associate Professor (opponent)
Materials and Manufacturing Technology, Chalmers University of Technology
visa färre...
Jönköping University JTH Forskningsområde Material och tillverkning - gjutning (creator_code:org_t)
Göteborg : Chalmers University of Technology, 2009
Engelska 90 s.
Serie: Research Series from Chalmers University of Technology, 1652-8891 ; 46/2009
  • Licentiatavhandling (övrigt vetenskapligt/konstnärligt)
Abstract Ämnesord
Stäng  
  • Compacted graphite iron (CGI) is a cast iron material that has gained much attention due to its attractive material properties which are intermediate between those of grey and ductile cast iron. In the automotive industry compacted graphite iron has become an interesting alternative material to grey cast iron in components like cylinder blocks or cylinder heads. The reason for this interest is the higher strength found in CGI. However, one disadvantage is the lower thermal conductivity of CGI compared to grey cast iron. The aim of the present work is to investigate how chemical composition and cooling rate affects the microstructure in compacted graphite iron and trying to relate the microstructure to the thermal conductivity. The effect of an austempering heat treatment process on some material properties in CGI, grey and ductile cast iron is also investigated.   The austempering heat treatment was shown to have a significant influence on many of the material properties investigated. The hardness was increased, while the thermal conductivity was reduced, for all three graphite morphologies observed. Scuffing resistance increased considerably for the austempered grey iron but was slightly reduced for the other two austempered morphologies. The ultimate tensile strength in bending was reduced in the austempered grey iron and CGI samples but slightly increased in the ductile iron sample.   It was confirmed that alloying elements like magnesium increased nodularity, while copper and tin promoted formation of pearlite in CGI. Silicon had a ferrite promoting effect as well as an inoculating effect and chromium and molybdenum promoted formation of carbides. The thermal conductivity was highly affected by the fraction of ferrite as well as nodularity and addition of carbon and silicon. Based on these results a mathematical model was developed for calculation of the thermal conductivity at various temperatures. 

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Materialteknik (hsv//swe)
ENGINEERING AND TECHNOLOGY  -- Materials Engineering (hsv//eng)

Nyckelord

Compacted graphite iron
Microstructure
Thermal conductivity
Ferrite
Cementite
Nodularity
Mathematical modelling
Laser flash technique
Austempering

Publikations- och innehållstyp

vet (ämneskategori)
lic (ämneskategori)

Hitta via bibliotek

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy