Sökning: onr:"swepub:oai:DiVA.org:hv-10563" >
Effects of Austenit...
-
Rehan, ArbabHögskolan Väst,Forskningsmiljön produktionsteknik(PTW),Uddeholms AB, SE-683 85, Hagfors, Sweden,PTW
(författare)
Effects of Austenitisation Temperature and Multiple Tempering on the Microstructure and Impact Toughness of a 5 wt. % Cr Cold Work Tool Steel
- Artikel/kapitelEngelska2016
Förlag, utgivningsår, omfång ...
-
10th TOOL Conference,2016
-
electronicrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:hv-10563
-
https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-10563URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:vet swepub-contenttype
-
Ämneskategori:kon swepub-publicationtype
Anmärkningar
-
The microstructure and properties of a 5 wt.% Cr cold work tool steel were studied after austenitisation at 1020°C, 1050°C or 1075°C followed by single, double and triple tempering treatments at 525°C. The microstructures were investigated with scanning electron microscopy and X-ray diffraction and phase transformations were studied by dilatometry. Furthermore, hardness and Charpy un-notched and V-notched impact toughness testing was performed and results were correlated to observed microstructures. With higher austenitisation temperature, the martensite and bainite start temperatures were lowered resulting in microstructures containing a higher volume fraction of retained austenite. Retained austenite transformed into martensite on cooling from the tempering temperature. Specimens that were austenitised at 1050°C or 1075°C and tempered twice contained fresh martensite. Applying a third tempering was therefore required to guarantee a fully tempered microstructure. The second tempering resulted in an increase of the un-notched impact energy while the third tempering did not have a pronounced effect. A triple tempering procedure could be preferable when austenitising at high temperatures to avoid undesirable fresh martensite in the tool microstructure.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Medvedeva, AnnaUddeholms AB, SE-683 85, Hagfors, Sweden.
(författare)
-
Svensson, Lars-Erik,1951-Högskolan Väst,Avdelningen för svetsteknologi (SV),PTW(Swepub:hv)larsve
(författare)
-
Karlsson, Leif,1952-Högskolan Väst,Avdelningen för svetsteknologi (SV),PTW(Swepub:hv)leikar
(författare)
-
Högskolan VästForskningsmiljön produktionsteknik(PTW)
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:10th TOOL Conference, Tool, conference proceedings: 10th TOOL Conference, s. 1-10
Internetlänk