Sökning: onr:"swepub:oai:DiVA.org:hv-13462" >
Room temperature an...
-
Venkatesh, Lakshmi NarayananInternational Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur, Hyderabad 500005, India; Department of Metallurgical Engineering & Materials Science, IIT Bombay, Powai, Mumbai 400076, India
(författare)
Room temperature and 600 °C erosion behaviour of various chromium carbide composite coatings
- Artikel/kapitelEngelska2019
Förlag, utgivningsår, omfång ...
-
Elsevier BV,2019
-
printrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:hv-13462
-
https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-13462URI
-
https://doi.org/10.1016/j.wear.2019.01.025DOI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
In this study, the erosion behaviour of laser clad chromium carbide-Ni rich alloy composite coatings with a wide range of carbide contents at room temperature and 600 °C were investigated. The variation in carbide content of the coatings was due to dilution from the substrate and the high cooling rate in the laser cladding process preventing re-solidification of the molten carbides. Erosion rate was observed to be a function of carbide content alone and was significantly higher at 600 °C as compared to room temperature. Erosion wear ratio (E90/E30) was also dependent on carbide content but decreased at higher temperature and higher carbide contents. A comparison of erosion behaviour with detonation and plasma sprayed counterparts showed the superior performance of laser clad coatings at 600 °C. The poor erosion performance of the detonation and plasma sprayed coatings was due to weak splat bonding. Thick oxide layer formed on the steel substrate after pre-oxidation resulted in its poor erosion performance.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Venkataraman, B.Defence Metallurgical Research Laboratory (DMRL), Kanchanbagh, Hyderabad 500058, India
(författare)
-
Tak, ManishInternational Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur, Hyderabad 500005, India
(författare)
-
Sivakumar, Ganapathy S.International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur, Hyderabad 500005, India
(författare)
-
Gundakaram, Ravi C.International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur, Hyderabad 500005, India
(författare)
-
Joshi, Shrikant V.,1960-Högskolan Väst,Forskningsmiljön produktionsteknik(PTW),PTW(Swepub:hv)shrjos
(författare)
-
Samajdar, Indradev S.Department of Metallurgical Engineering & Materials Science, IIT Bombay, Powai, Mumbai 400076, India
(författare)
-
International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Balapur, Hyderabad 500005, India; Department of Metallurgical Engineering & Materials Science, IIT Bombay, Powai, Mumbai 400076, IndiaDefence Metallurgical Research Laboratory (DMRL), Kanchanbagh, Hyderabad 500058, India
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Wear: Elsevier BV422-423, s. 44-530043-16481873-2577
Internetlänk
Hitta via bibliotek
-
Wear
(Sök värdpublikationen i LIBRIS)
Till lärosätets databas