Sökning: onr:"swepub:oai:DiVA.org:kth-168398" >
A Mathematical Mode...
A Mathematical Modeling Study of the Influence of Small Amounts of KCl Solution Tracers on Mixing in Water and its Residence Time Distribution in a Continuous Flow Reactor-Metallurgical Tundish
-
- Chen, Chao (författare)
- KTH,Tillämpad processmetallurgi,State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
-
- Jonsson, Lage (författare)
- KTH,Tillämpad processmetallurgi,FOI, Swedish Defence Research Agency, Division of CBRN Defence and Security
-
- Tilliander, Anders (författare)
- KTH,Tillämpad processmetallurgi
-
visa fler...
-
- Cheng, Guoguang (författare)
- State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
-
- Jönsson, Pär (författare)
- KTH,Tillämpad processmetallurgi
-
visa färre...
-
(creator_code:org_t)
- Pergamon Press, 2015
- 2015
- Engelska.
-
Ingår i: Chemical Engineering Science. - : Pergamon Press. - 0009-2509 .- 1873-4405. ; 137, s. 914-937
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- In an earlier research (Chen et al., 2015a) a mathematical model was established to simulate tracer mixing (a KCl solution). The predicted Residence Time Distribution (RTD) curves showed good agreements with experimental RID curves for larger amounts of tracer additions. However, for smaller additions (50 mL) of a KCl solution into water, the predicted RID curves tended to deviate from the experimental RTD curves for a tundish (a continuous flow reactor). The current paper focuses on the possibilities that the predictability for smaller additions could be resolved by using a suitable turbulence model. The performance of five different turbulence models representing different modeling techniques and levels of complexity were tested in combination with using a density-coupled mixed composition fluid model to simulate the mixing, i.e. the following models: LVEL, Chen-Kim k-epsilon, MMK k-epsilon, Explicit Algebraic Reynolds Stress Model (EARSM), and Large Eddy Simulation (LES): Wall-Adapting Local Eddy-viscosity (WALE). The results indicate that models that tend to resolve turbulence structures renders better predictions of the mixing process of smaller tracer amounts. In addition, the influence of different tracer amounts on the flow in tundish was assessed. The simulation results for 75 mL, 100 mL, 150 mL, and 250 mL KCl tracer additions were compared. The results showed that in an upward flow the tracer will, sooner or later (dependent on the tracer amount), sink to the bottom. This is due to the higher density of the tracer compared to the density of water. From a physical modeling perspective, this issue is like the "butterfly effect". It is showed that for a slight increase of the amount of tracer, the flow field might be disturbed. This, in turn, will result in a shifted RTD curve.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Strömningsmekanik och akustik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Fluid Mechanics and Acoustics (hsv//eng)
Publikations- och innehållstyp
- vet (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas