Sökning: onr:"swepub:oai:DiVA.org:kth-170666" >
Suppressing tool ch...
Suppressing tool chatter with novel multi-layered nanostructures of carbon based composite coatings
-
- Fu, Qilin, 1986- (författare)
- KTH,Maskin- och processteknologi,MMS
-
Lorite, Gabriela Simone (författare)
-
- Rashid, Md. Masud-Ur (författare)
- KTH,Maskin- och processteknologi
-
visa fler...
-
Selkala, Tuula (författare)
-
Uusitalo, Juha (författare)
-
Toth, Geza (författare)
-
Kordas, Krisztian (författare)
-
- Österlind, Tomas (författare)
- KTH,Maskin- och processteknologi
-
- Nicolescu, Cornel Mihai (författare)
- KTH,Maskin- och processteknologi
-
visa färre...
-
(creator_code:org_t)
- Elsevier BV, 2015
- 2015
- Engelska.
-
Ingår i: Journal of Materials Processing Technology. - : Elsevier BV. - 0924-0136 .- 1873-4774. ; 223, s. 292-298
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- Multi-layered nanostructured Cu and Cu-CNx composites synthesized by plasma-enhanced chemical vapour deposition were applied in the clamping area of a milling tool to suppress regenerative tool chatter. Scanning electron microscopy analysis showed a multi-layered nanostructure with excellent conformality, i.e. coating is not only uniform on planar surfaces but also around corners of the substrate. Cu:CuCNx nanostructured multilayers with thicknesses of approximately 0.5:1.6 mu m were obtained. With a diameter of 20 mm, the milling tool performed slotting processes at an overhang length of 120 mm. Modal analysis showed that a coating, with a thickness of approximately 300 mu m, can add sufficient damping without losing stiffness of the tool, to increase the critical stability limit by 50% or 100% depending on cutting direction.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Produktionsteknik, arbetsvetenskap och ergonomi (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Production Engineering, Human Work Science and Ergonomics (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Nanoteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Nano-technology (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Kompositmaterial och -teknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Composite Science and Engineering (hsv//eng)
Nyckelord
- Milling
- Tool regenerative chatter
- Metal matrix composites
- Nano-structures
- Internal friction damping
- Plasma enhanced chemical vapour deposition (PECVD)
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Fu, Qilin, 1986-
-
Lorite, Gabriela ...
-
Rashid, Md. Masu ...
-
Selkala, Tuula
-
Uusitalo, Juha
-
Toth, Geza
-
visa fler...
-
Kordas, Krisztia ...
-
Österlind, Tomas
-
Nicolescu, Corne ...
-
visa färre...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Maskinteknik
-
och Produktionstekni ...
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Nanoteknik
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Materialteknik
-
och Kompositmaterial ...
- Artiklar i publikationen
-
Journal of Mater ...
- Av lärosätet
-
Kungliga Tekniska Högskolan