Matrix crack induced stiffness reductions in [(0(m)/90(n)/+theta(p)/-theta(q))(s)](m) composite laminates

• Two- and three-dimensional linearly elastic glass/epoxy and carbon/epoxy laminates of the type [(0m/90n/ + theta(p)/ - theta(q))s]M containing periodically distributed matrix cracks have been analysed by aid of the finite element method. The presented finite element model enables modelling of several important thick and thin ply stacking sequences like cross-plies, angle plies and quasi-isotropic laminates. Due to periodicity it suffices to model a representative volume element of the laminate. The boundaries of this unit cell represent prospective crack surfaces. In this way varying crack configurations and crack densities could be simulated. By application of periodic boundary conditions the stiffness tensors for laminates containing different crack configurations were calculated. The results are presented in the form of reduced engineering stiffness parameters as functions of matrix crack densities for a thick quasi-isotropic [(0-degree/90-degrees/ + 45-degrees/ -45-degrees)s]M glass/epoxy laminate, a thick [(0-degree/90-degrees + 55-degrees/ - 55-degrees)s]M carbon/epoxy laminate and a thin (0-degree/ +45-degrees/ -45-degrees)s glass/epoxy laminate. Comparisons are made to an approximate analytic model developed previously. An excellent agreement between the analytic predictions and the finite element results was found for all cases under consideration.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Materialteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering (hsv//eng)

Nyckelord

Boundary conditions

Calculations

Carbon

Computer simulation

Cracks

Epoxy resins

Finite element method

Glass

Mathematical models

Stiffness

Tensors

Carbon/epoxy laminate

Composite laminate

Crack configuration

Crack density

Glass/epoxy laminate

Matrix crack induced stiffness reduction

Ply stacking sequence

Volume element

Engineering mechanics

Teknisk mekanik

Materials science

Teknisk materialvetenskap

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)