Geometric optimization of a double pipe heat exchanger with combined vortex generator and twisted tape : A CFD and response surface methodology (RSM) study

• In this research, a numerical investigation is done on the effect of employing the new combined vortex generators, the twisted tape turbulator and Al2O3-H2O nanofluid as the involved base fluid. Such study is carried out on the behavior of the heat transfer rate and the pressure drop of a double pipe heat exchanger. Accordingly, the response surface methodology (RSM) grounded on the central composite design (CCD) is used for acquiring the optimized geometry of the combined vortex generator and twisted tape turbulator. In order to have the maximum Nusselt number and minimum friction factor, twenty cases with different pitches ratio Pil=0.09-0.18, angles (θ=0-30°) and Reynolds numbers (Re = 5000-20000) are examined. The Results show that the pitch ratio has a predominant effect on the Nusselt number and the friction factor, which causes an efficiency increase up to five times compared to the original one. In addition, by decreasing the angle of the vortex generators in the new combined turbulator, both Nusselt number and the friction factor are increased.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering (hsv//eng)

Nyckelord

Central composite design (CCD) technique

Combined vortex generator and twisted tape turbulator

Double pipe heat exchanger

Pressure drop

Response surface methodology (RSM)

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)