Temperature Modeling and Characterization of the Current Gain in 4H-SiC Power BJTs

• The current gain of 4H-SiC BJTs has been modeled using interface traps between SIC and SiO2 to describe surface recombination, by a positive temperature dependence of the carrier lifetime in the base region and by bandgap narrowing in the emitter region. The interface traps have been modeled by one single level at 1 eV above the valence band, with capture cross section of 1 x 10(-15) cm(2) and concentration of 2 x 10(12) cm(-2). The temperature behavior of SiC BJTs has been simulated and the results have been compared with measurements. An analysis of the carrier concentration has been performed in order to describe the mechanisms for fall-off of the current gain at high collector current. At room temperature high injection in the base and forward biasing of the base-collector junction occur simultaneously causing an abrupt drop of the current gain. At higher temperatures high injection in the base is alleviated by the higher ionization degree of the aluminum dopants, and then forward biasing of the base-collector junction is the only acting mechanism for the current gain fall-off at high collector current. This mechanism and the negative temperature dependence of the carrier mobility can also explain the reduction of the knee current for gain fall-off with increasing temperature. Simulations with different emitter widths have been also performed and analyzed to characterize the emitter size effect. Higher current density caused by reducing the emitter width introduces higher carrier recombination in the emitter region, leading to a reduction of the current gain.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Elektroteknik och elektronik -- Annan elektroteknik och elektronik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Electrical Engineering, Electronic Engineering, Information Engineering -- Other Electrical Engineering, Electronic Engineering, Information Engineering (hsv//eng)

Nyckelord

simulations

current gain

interface traps

temperature modeling

emitter size effect

Electrical engineering, electronics and photonics

Elektroteknik, elektronik och fotonik

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)