Sökning: onr:"swepub:oai:DiVA.org:liu-111060" >
Damage analysis of ...
Damage analysis of a retired gas turbine disc
-
- Chen, Zhe (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
- Moverare, Johan (författare)
- Siemens Industrial Turbomachinery AB, Finspång, Sweden
-
- Peng, Ru Lin (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
visa fler...
-
- Johansson, Sten (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
visa färre...
-
(creator_code:org_t)
- John Wiley & Sons, 2014
- 2014
- Engelska.
-
Ingår i: Proceedings of the 2014 Energy Materials Conference. - : John Wiley & Sons. - 9781119027942 ; , s. 405-410
- Relaterad länk:
-
https://urn.kb.se/re...
Abstract
Ämnesord
Stäng
- Gas turbine discs operate mostly at high temperature gradients and are subjected to mechanical loads simultaneously. The high thermal and mechanical loads eventually could result in degradation and damages in disc material, thereby increasing the risk of disc failure. In this study, a damage analysis was performed in a retired gas turbine disc made of Inconel 718. Oxidation attack and microstructural degradation as the consequence of the high service temperature have been found to be the main damages that take place in the non-contact area of the retired disc. In the blade/disc contact area, fretting fatigue occurs, with a result that cracks initiate from the oxide/metal interface and propagate in the disc alloy parallel to the sliding direction of fretting, consequently reducing the stability and safety of the disc. Meantime, oxygen diffuses into the fretting fatigue cracks, thereby exacerbating the oxidation attack. A multi-layered scale with periodic formation of the Fe-oxide/spinel layer and the metallic layer is formed on the contact surface. In both contact and non-contact area, recrystallization and α-Cr precipitation take place in the surface layer of the disc alloy. The locations where α-Cr precipitates are commonly considered to be the natural sites for mechanical weakness.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering (hsv//eng)
Publikations- och innehållstyp
- ref (ämneskategori)
- kon (ämneskategori)
Hitta via bibliotek
Till lärosätets databas