Sökning: onr:"swepub:oai:DiVA.org:liu-120994" >
Online Estimation o...
Online Estimation of Ship's Mass and Center of Mass Using Inertial Measurements
-
- Linder, Jonas, 1984- (författare)
- Linköpings universitet,Reglerteknik,Tekniska högskolan
-
- Enqvist, Martin (författare)
- Linköpings universitet,Reglerteknik,Tekniska högskolan
-
- Fossen, Thor I. (författare)
- Centre for Autonomous Marine Operations and Systems (AMOS), Department of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim, Norway
-
visa fler...
-
- Johansen, Tor Arne (författare)
- Centre for Autonomous Marine Operations and Systems (AMOS), Department of Engineering Cybernetics, Norwegian University of Science and Technology, Trondheim, Norway
-
- Gustafsson, Fredrik (författare)
- Linköpings universitet,Reglerteknik,Tekniska högskolan
-
visa färre...
-
(creator_code:org_t)
- Linköping : Elsevier BV, 2015
- 2015
- Engelska.
-
Serie: LiTH-ISY-R, 1400-3902 ; 3081
-
Ingår i: Proceedings of the 10th Conference on Manoeuvring and Control of Marine Craft. - Linköping : Elsevier BV.
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://liu.diva-por... (primary) (Raw object)
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
https://urn.kb.se/re...
-
visa färre...
Abstract
Ämnesord
Stäng
- A ship's roll dynamics is sensitive to the mass and mass distribution. Changes in these physical properties might introduce unpredictable behavior of the ship and a worst-case scenario is that the ship will capsize. In this paper, a recently proposed approach for online estimation of mass and center of mass is validated using experimental data. The experiments were performed using a scale model of a ship in a wave basin. The data were collected in free run experiments where the rudder angle was recorded and the ship's motion was measured using an inertial measurement unit. The motion measurements are used in conjunction with a model of the roll dynamics to estimate the desired properties. The estimator uses the rudder angle measurements together with an instrumental variable method to mitigate the influence of disturbances. The experimental study shows that the properties can be estimated with quite good accuracy but that variance and robustness properties can be improved further.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Elektroteknik och elektronik -- Reglerteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Electrical Engineering, Electronic Engineering, Information Engineering -- Control Engineering (hsv//eng)
Nyckelord
- modelling
- identification
- operational safety
- inertial measurement unit
- identifiability
- centre of mass
- physical models
- accelerometers
- gyroscopes
- marine systems
Publikations- och innehållstyp
- ref (ämneskategori)
- kon (ämneskategori)