SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:DiVA.org:liu-97649"
 

Sökning: onr:"swepub:oai:DiVA.org:liu-97649" > Development of a no...

Development of a novel macrostructured cathode for large-area neutron detectors based on the B-10-containing solid converter

Stefanescu, I (författare)
Technical University of Munich, Germany
Abdullahi, Y (författare)
Technical University of Munich, Germany
Birch, Jens (författare)
Linköpings universitet,Tunnfilmsfysik,Tekniska högskolan
visa fler...
Defendi, I (författare)
Technical University of Munich, Germany
Hall-Wilton, Richard (författare)
Lund University,Lunds universitet,European Spallation Source ESS AB,Stiftelser och övriga anknutna verksamheter,Other Institutions and Utilities,European Spallat Source ESS AB, Sweden
Höglund, Carina (författare)
Lund University,Lunds universitet,Linköpings universitet,Tunnfilmsfysik,Tekniska högskolan,European Spallation Source ESS AB,Stiftelser och övriga anknutna verksamheter,Other Institutions and Utilities
Hultman, Lars (författare)
Linköpings universitet,Tunnfilmsfysik,Tekniska högskolan
Seiler, D (författare)
Technical University of Munich, Germany
Zeitelhack, K (författare)
Technical University of Munich, Germany
visa färre...
 (creator_code:org_t)
Elsevier, 2013
2013
Engelska.
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 727, s. 109-125
  • Tidskriftsartikel (refereegranskat)
Abstract Ämnesord
Stäng  
  • We present a novel design for a macrostructured cathode that can be coated with a thin layer of the B-10 solid converter and mounted to replace the Boron-lined flat parallel plates of a proportional counter used for slow neutron detection. The proposed design consists of a 3D regular pattern exhibiting millimeter deep grooves with an opening angle of alpha = 45 degrees, which could be created in the substrate material by milling or forming. When a commonly used coating method like magnetron sputtering is employed to deposit the Boron-layer, due to the line-of-sight distribution of the ions, the thickness of the coating on the side of the grooves will be reduced by a factor similar to sin alpha/2 with respect to the thickness of the layer deposited on a flat surface normal to the ion flux. The effective neutron absorption film thickness is in this case similar for the sidewalls of the grooves and a surface at normal incidence, yielding comparable absorption efficiencies. However, the escape efficiency for the reaction products is higher for the sidewalls, owing to the thinner coating. This leads to a higher overall detection efficiency for the grooved cathode when compared to a flat cathode with the same surface area and coated with a Boron layer with roughly the same thickness. In this paper we present and discuss the GEANT4 simulations performed to optimize the geometry of the cathode, the manufacturing and coating by magnetron sputtering, as well as the proof-of-principle measurements carried out in order to assess the performance of the proposed design.

Ämnesord

NATURVETENSKAP  -- Fysik -- Acceleratorfysik och instrumentering (hsv//swe)
NATURAL SCIENCES  -- Physical Sciences -- Accelerator Physics and Instrumentation (hsv//eng)

Nyckelord

Neutron detector
Boron converter
GEANT4
GARFIELD
TECHNOLOGY
TEKNIKVETENSKAP
Neutron detector
Boron converter
GEANT4
GARFIELD

Publikations- och innehållstyp

ref (ämneskategori)
art (ämneskategori)

Hitta via bibliotek

Till lärosätets databas

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy