Sökning: onr:"swepub:oai:DiVA.org:ltu-36956" >
Effect of oxide lay...
Effect of oxide layers and near surface transformations on friction and wear during tool steel and boron steel interaction at high temperatures
-
- Hardell, Jens (författare)
- Luleå tekniska universitet,Maskinelement
-
- Hernandez, Sinuhé (författare)
- Luleå tekniska universitet,Maskinelement
-
- Mozgovoy, Sergej (författare)
- Luleå tekniska universitet,Maskinelement
-
visa fler...
-
- Pelcastre, Leonardo (författare)
- Luleå tekniska universitet,Maskinelement
-
- Courbon, Cedric (författare)
- Université de Lyon, CNRS, Ecole Nationale d׳Ingénieurs de Saint-Etienne, LTDS UMR5513, F-42023, France
-
- Prakash, Braham (författare)
- Luleå tekniska universitet,Maskinelement
-
visa färre...
-
(creator_code:org_t)
- Elsevier BV, 2015
- 2015
- Engelska.
-
Ingår i: Wear. - : Elsevier BV. - 0043-1648 .- 1873-2577. ; 330-331, s. 223-229
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- Recent years have seen a continuously growing interest in high temperature tribological research. A significant part of this is driven by the need for improved understanding and knowledge pertaining to friction and wear and their control in the context of hot forming of high strength steels. Friction and wear characteristics of a sliding system are highly dependent on the properties of the two interacting surfaces. At high temperatures, the surface and material properties become extremely important since these systems often operate under unlubricated conditions. High temperature tribological processes are highly complex as these involve changes in mechanical properties due to microstructural changes; thermal softening; surface chemical and morphological changes due to oxidation and diffusion; deterioration of the surface and bulk material as a result of adhesive/abrasive wear and thermal fatigue. Many of these changes occur on the surfaces and/or in the near surface region. The formation of surface oxide layers and near surface layers with a highly refined microstructure (nano-structured) has been reported to have a significant influence on the tribological behaviour. An improved understanding of these effects is a prerequisite in an attempt towards controlling friction and wear at high temperatures. The main aim of this work is to investigate the formation of oxide layers and near surface transformed layers during tool steel and boron steel interaction at elevated temperatures and their relation to the friction and wear response. The results from sliding wear tests showed that under favourable conditions of temperature and load, a reduction of wear by three orders of magnitude and reduced friction by 50% was obtained. This was attributed to the formation of a composite layer structure involving a refined workhardened layer and a protective oxide layer on top. In the case of three body abrasive wear of boron steel, a reduction in wear rate when temperature increased (100–200 °C) has also been found. This reduction in three-body wear is due to the formation of a workhardened layer with a mechanically mixed layer of wear debris and fragmented silica particles on top. At higher temperatures (>500 °C), the softer matrix due to recrystallisation and phase transformations was unable to maintain a lower wear rate despite the presence of embedded fragmented silica particles.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Tribologi (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Tribology (hsv//eng)
Nyckelord
- Machine Elements
- Maskinelement
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
-
Wear
(Sök värdpublikationen i LIBRIS)
Till lärosätets databas