Sökning: onr:"swepub:oai:DiVA.org:ltu-99297" >
Ductility deteriora...
Ductility deterioration induced by L21 phase in ferritic alloy through Ti addition
-
- Chen, Xu (författare)
- School of Materials Science and Engineering, Xiangtan University, Xiangtan, 411105, China
-
- Peng, Shaowen (författare)
- School of Materials Science and Engineering, Xiangtan University, Xiangtan, 411105, China
-
- Liu, Ye (författare)
- School of Materials Science and Engineering, Xiangtan University, Xiangtan, 411105, China
-
visa fler...
-
- Bai, Song (författare)
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, 410083, China
-
- Zhang, Lin (författare)
- Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, China
-
- He, Shuang (författare)
- School of Materials Science and Engineering, Xiangtan University, Xiangtan, 411105, China
-
- Gorbatov, Oleg I. (författare)
- Luleå tekniska universitet,Materialvetenskap
-
- Qu, Xuanhui (författare)
- Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, China
-
visa färre...
-
(creator_code:org_t)
- Elsevier Editora Ltda, 2023
- 2023
- Engelska.
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier Editora Ltda. - 2238-7854 .- 2214-0697. ; 25, s. 3273-3284
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://ltu.diva-por... (primary) (Raw object)
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- Ductility deterioration induced by L21-Ni2AlTi precipitates in the aged ferritic alloys was examined systematically by using a combination of scanning transmission electron microscope (STEM), mechanical tests and first-principles thermodynamic calculations. The experimental studies revealed that the strength and hardness of the aged Fe–10Cr–5Ni–1Al–1Ti ferritic alloy containing B2–NiAl and L21-Ni2AlTi precipitates were higher than that of the aged Fe–10Cr–5Ni–1Al ferritic alloy containing NiAl precipitates, whereas the elongation-to-failure decreased dramatically from 9.3% to 0.3% indicating an obvious ductility deterioration due to the formation of L21-Ni2AlTi precipitates. This was also confirmed by the observation of fracture transition mode from dimpled failure to cleavage failure. The first-principles calculations, concerning the precipitate/matrix interface, were carried out to provide a theoretical analysis for the ductile–brittle transition by means of empirical ductility criteria ratios G/B and (C12–C44)/B as well as cleavage energy. The cleavage energy results indicated an intrinsic brittleness of the L21-Ni2AlTi phase and the L21-Ni2AlTi/BCC-Fe interface. Our analysis revealed that the intrinsic brittleness of L21-Ni2AlTi phase and L21-Ni2AlTi/BCC-Fe interface plays a vital role in determining the deformation behavior of the aged Fe–10Cr–5Ni–1Al–1Ti alloy.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)
- NATURVETENSKAP -- Fysik -- Den kondenserade materiens fysik (hsv//swe)
- NATURAL SCIENCES -- Physical Sciences -- Condensed Matter Physics (hsv//eng)
Nyckelord
- Cleavage energy
- Ductility deterioration
- First-principles calculations
- L21-Ni2AlTi phase
- L21-Ni2AlTi/BCC-Fe interface
- Applied Physics
- Tillämpad fysik
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas