Sökning: onr:"swepub:oai:DiVA.org:mdh-32406" >
Impacts of thermo-p...
Impacts of thermo-physical properties of gas and liquid phases on design of absorber for CO2 capture using monoethanolamine
-
- Nookuea, Worrada (författare)
- Mälardalens högskola,Framtidens energi
-
- Tan, Yuting (författare)
- KTH,Skolan för kemivetenskap (CHE),School of Chemical Science and Engineering, Royal Institute of Technology, Stockholm, Sweden
-
- Li, Hailong (författare)
- Mälardalens högskola,Framtidens energi
-
visa fler...
-
- Thorin, Eva (författare)
- Mälardalens högskola,Framtidens energi
-
- Yan, Jinyue (författare)
- KTH,Mälardalens högskola,Framtidens energi,School of Chemical Science and Engineering, Royal Institute of Technology, Stockholm, Sweden,Energiprocesser,Mälardalen University, Sweden
-
visa färre...
-
(creator_code:org_t)
- Elsevier BV, 2016
- 2016
- Engelska.
-
Ingår i: International Journal of Greenhouse Gas Control. - : Elsevier BV. - 1750-5836 .- 1878-0148. ; 52, s. 190-200
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://doi.org/10.1...
-
https://urn.kb.se/re...
-
visa färre...
Abstract
Ämnesord
Stäng
- Absorption of CO2 with aqueous amines in post-combustion capture is characterized as a heat and mass transfer processes with chemical reaction, which is sensitively affected by the thermo-physical properties of fluids. In order to optimize the design of the absorber of CO2 capture process, in this paper, the impacts of thermo-physical properties on the column design were investigated. Furthermore, the property impacts on the capital cost of the absorber unit were also identified and analyzed. Results show that the gas phase density has the most significant effect on the column diameter. Underestimation of the gas phase density of 10% may result in an increase of about 6% of the column diameter. For the packing height, the liquid phase density has the most significant effect. 10% underestimation of the liquid phase density may result in an increase of 8% of the packing height. Moreover, the effect from the liquid phase viscosity is also significant. For the annual capital cost, the liquid phase density also shows the most significant effect. Underestimation of the liquid phase density of 10% leads to the cost overestimation of $1.4 million for the absorption column for a 400 MW coal-fired power plant. Therefore, the development of the flue gas density model and liquid phase density and viscosity models of the aqueous amine solution with CO2 loading should be prioritized.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Energiteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Energy Engineering (hsv//eng)
Nyckelord
- Chemical absorption
- Density
- Packing height
- Post-combustion capture
- Property impact
- Viscosity
- Carbon dioxide
- Coal
- Coal combustion
- Combustion
- Costs
- Density (specific gravity)
- Fossil fuel power plants
- Gases
- Liquids
- Mass transfer
- Physical properties
- Absorption columns
- Coal-fired power plant
- Heat and mass transfer process
- Liquid phase viscosity
- Post-combustion captures
- Thermo-physical property
- Density of gases
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas