Sökning: onr:"swepub:oai:DiVA.org:miun-42860" >
Unique steel belt p...
Unique steel belt press technology for development of high strength papers from HYP
-
- Joelsson, Tove (författare)
- Mittuniversitetet,Institutionen för kemiteknik,MoRe Research Örnsköldsvik AB,FSCN
-
Svedberg, A. (författare)
-
Norgren, S. (författare)
-
visa fler...
-
- Pettersson, Gunilla (författare)
- Mittuniversitetet,Institutionen för kemiteknik,FSCN
-
- Berg, Jan-Erik, 1957- (författare)
- Mittuniversitetet,Institutionen för kemiteknik,FSCN
-
Garcia-Lindgren, C. (författare)
-
- Engstrand, Per, Professor, 1955- (författare)
- Mittuniversitetet,Institutionen för kemiteknik,FSCN
-
visa färre...
-
(creator_code:org_t)
- TAPPI Press, 2021
- 2021
- Engelska.
-
Ingår i: TAPPICon Virtual 2021. - : TAPPI Press. - 9781713829683 ; , s. 523-531
- Relaterad länk:
-
https://urn.kb.se/re...
Abstract
Ämnesord
Stäng
- The dry strength properties of hot pressed moist paper improved as stiff high-yield pulp (HYP) fibers soften and the sheet density increased. Very high wet strength was also achieved without adding strengthening agents. This research focuses on a new hot-pressing methodology based on a steel belt-based pilot cylinder press with infrared heating. The heated steel belt transports the moist paper into the cylinder nip with two adjacent steel rollers with adjustable nip pressure. The temperature ranges up to 300°C, maximum speed is 5 m/min, maximum pulling force from the steel belt is 70 kN and the line load in the two press nips is 15 kN/m each. High peak pressures are possible due to the hard press nip between steel rolls and steel belt, allowing a good heat transfer to the paper. The long dwell time allows strained drying of the paper which results to high density and high wet strength. Paper samples from high-yield pulps were tested at different nip pressures, temperatures and machine speeds while the dry content was kept constant at about 63%. High nip pressure showed the largest effect on densification and dry strength. While high temperature and long dwell time seem to be most important in achieving high wet strength.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Pappers-, massa- och fiberteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Paper, Pulp and Fiber Technology (hsv//eng)
Publikations- och innehållstyp
- ref (ämneskategori)
- kon (ämneskategori)
Hitta via bibliotek
Till lärosätets databas