Sökning: onr:"swepub:oai:DiVA.org:ri-31094" >
Practical bond mode...
-
Blomfors, Mattias,1990RISE,CBI Betonginstitutet,Chalmers University of Technology, Sweden,Chalmers tekniska högskola,The Swedish Cement and Concrete Research Institute (CBI)
(författare)
Practical bond model for corroded RC bridges
- Artikel/kapitelEngelska2017
Förlag, utgivningsår, omfång ...
-
2017-08-06
-
Cham :Springer International Publishing,2017
-
printrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:ri-31094
-
ISBN:9783319594705
-
https://urn.kb.se/resolve?urn=urn:nbn:se:ri:diva-31094URI
-
https://doi.org/10.1007/978-3-319-59471-2_206DOI
-
https://research.chalmers.se/publication/250082URI
-
https://lup.lub.lu.se/record/964f9331-3355-477a-a9cf-041dc9cb5d8eURI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:kon swepub-publicationtype
Anmärkningar
-
Corrosion of steel reinforcement is a common cause of deterioration in reinforced concrete bridges and many existing bridges are damaged to varying degrees. The rate of deterioration of the bridge stock has been shown to increase due to climate change. Unsympathetically, the demand for load-carrying capacity is however often increased with time. Therefore there is an increasing need for reliable methods to assess the load-carrying capacity and remaining service-life of existing infrastructure. A simple model for the assessment of Anchorage in corroded Reinforced Concrete structures (ARC) has previously been developed. It was originally based on fib Model Code 1990 and has been verified with experiments and three-dimensional nonlinear finite element (3D NLFE) analyses for both accelerated and natural corrosion as well as for different degrees of corrosion. The model was applied when assessing two road bridges in Sweden. The investigation demonstrated great cost savings but also areas for improvement, in particular regarding (a) applicability to practical cases and (b) incorporation of uncertainties in the assessment. The primary focal point of this paper is to present an overview of the development of the ARC model together with recent verifications against a large bond test database as well as foreseen future developments. It was found that the ARC model represents the physical behaviour reasonably well, and gives conservative values of bond strength compared to the bond tests database. In future works, among others, uncertainties of the input variables will be incorporated by means of probabilistic modelling, making way for implementation of the ARC model into semi-probabilistic safety concepts by extraction of modification factors. Overall, with more accurate and reliable assessment methods for corroded RC structures, environmental and economic savings are imminent as more of the potential of existing structures can be realized.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Lundgren, Karin,1968Chalmers University of Technology,Chalmers University of Technology, Sweden(Swepub:cth)coskl
(författare)
-
Ivanov, Oskar LarssonLund University,Lunds universitet,Avdelningen för Konstruktionsteknik,Institutionen för bygg- och miljöteknologi,Institutioner vid LTH,Lunds Tekniska Högskola,Division of Structural Engineering,Department of Building and Environmental Technology,Departments at LTH,Faculty of Engineering, LTH,Lund University, Sweden(Swepub:lu)kstr-okl
(författare)
-
Honfi, DanielRISE,Safety,RISE Research Institutes of Sweden,Research Institutes of Sweden (RISE)(Swepub:lu)kstr-dih
(författare)
-
Zandi, Kamyab,1981Chalmers University of Technology,Chalmers University of Technology, Sweden(Swepub:cth)kamyab
(författare)
-
RISECBI Betonginstitutet
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:High Tech ConcreteCham : Springer International Publishing, s. 1793-18032617-48209783319594705
Internetlänk
Hitta via bibliotek
Till lärosätets databas