Sökning: onr:"swepub:oai:DiVA.org:ri-34548" >
Microstructures of ...
Microstructures of oxide films formed in alloy 182 BWR core shroud support leg cracks
-
- Chen, Jiaxin (författare)
- Studsvik Nuclear AB, Sweden,Studsvik
-
- Jädernäs, Daniel (författare)
- Studsvik Nuclear AB, Sweden,Studsvik
-
- Lindberg, Ffredrik (författare)
- RISE,KIMAB
-
visa fler...
-
- Pettersson, Henrik, 1975 (författare)
- Chalmers University of Technology, Sweden,Chalmers tekniska högskola
-
- Bjurman, Martin (författare)
- Studsvik Nuclear AB, Sweden,Studsvik
-
- Kese, Kwadwo (författare)
- Studsvik Nuclear AB, Sweden,Studsvik
-
- Jenssen, Anders (författare)
- Studsvik Nuclear AB, Sweden,Studsvik
-
- Cocco, Massimo (författare)
- Forsmark Kraftgrupp AB, Sweden
-
- Johansson, Hanna (författare)
- Forsmark Kraftgrupp AB, Sweden
-
visa färre...
-
(creator_code:org_t)
- 2017-10-07
- 2018
- Engelska.
-
Ingår i: Miner. Met. Mater. Ser.. - Cham : Springer International Publishing. - 9783319684536 ; Part F11, s. 417-431
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://doi.org/10.1...
-
https://research.cha...
-
visa färre...
Abstract
Ämnesord
Stäng
- This paper contributes to a TEM examination on the oxide films formed at three locations along a crack path in Alloy 182 weld from a BWR core shroud support leg, namely, the crack mouth, the midway between the mouth and the crack tip, and the crack tip. In the crack mouth the oxide film was approximately 1.6 μm in thickness and consisted of relatively pure NiO. The midway oxide film was mainly a nickel chromium oxide with a film thickness of 0.3 μm. At the crack tip the oxide film was a nickel chromium iron oxide with a film thickness of 30 nm. In all studied locations the main oxides had the similar rocksalt structure and the cracks were much wider than the thicknesses of the oxide films. It probably suggests that the corroded metal was largely dissolved into the coolant. The different dissolution rates of nickel, chromium and iron cations in the oxide films are clearly displayed with the compositions of the residual oxides. The oxide stability under different redox potentials along the crack path is briefly discussed.
Ämnesord
- NATURVETENSKAP -- Kemi -- Materialkemi (hsv//swe)
- NATURAL SCIENCES -- Chemical Sciences -- Materials Chemistry (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Annan materialteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Other Materials Engineering (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Kemiteknik -- Korrosionsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Chemical Engineering -- Corrosion Engineering (hsv//eng)
Nyckelord
- BWR
- Core shroud
- Crack
- FIB
- Oxide microstructure
- SEM
- Support leg
- TEM
- Boiling water reactors
- Chromium
- Chromium compounds
- Crack propagation
- Crack tips
- Cracks
- Film thickness
- Iron oxides
- Microstructure
- Nickel
- Nickel oxide
- Nuclear energy
- Nuclear fuels
- Redox reactions
- Scanning electron microscopy
- Transmission electron microscopy
- Crack paths
- Dissolution rates
- Iron cations
- Nickel chromium
- Redox potentials
- Residual oxides
- Rock-salt structure
- Oxide films
Publikations- och innehållstyp
- ref (ämneskategori)
- kon (ämneskategori)
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Chen, Jiaxin
-
Jädernäs, Daniel
-
Lindberg, Ffredr ...
-
Pettersson, Henr ...
-
Bjurman, Martin
-
Kese, Kwadwo
-
visa fler...
-
Jenssen, Anders
-
Cocco, Massimo
-
Johansson, Hanna
-
visa färre...
- Om ämnet
-
- NATURVETENSKAP
-
NATURVETENSKAP
-
och Kemi
-
och Materialkemi
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Materialteknik
-
och Annan materialte ...
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Kemiteknik
-
och Korrosionsteknik
- Artiklar i publikationen
-
Miner. Met. Mate ...
-
Minerals, Metals ...
- Av lärosätet
-
RISE
-
Chalmers tekniska högskola